How to assign 1 position to 2 different senior positions.

Hi All,
please guide me how to maintain reporting of one position to multiple senior positions.
My Client has  requirment  that some of the positions report to the VP & to the CEO as well, & i have to distribute the reposting percentage also for the same.
How to go about it.can you all please guide me.

Hi,
Yes, there are a few more steps that you have to take before you can use the Matrix structure.  First, you have to define the relationship between the CEO and the individuals reporting.  You can use any of the standard relationships in table T778V or create your own.  Then you have to create an evaluation path to include this new relationship (T788A).  Finally, you can define a Matrix Type (table T779M - transaction 009M) with the objects, relationships and evaluation paths you created. 
To assign the matrix relationship, go to the Easy Access: Human Resources --> Organizational Management --> Organizational Plan --> Matrix --> Change (PPME).  Here you can select your matrix type and assign the Positions that should have this relationship. 
So Martix is the answer, but there are several steps to take before you can make this work.  The key is defining the exact relationship you want the various positions to have with the position of CEO. 
Paul

Similar Messages

  • How to assign a class for different colored links

    Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying to
    get links to be different colors within the same page. I have a
    navbar with a CSS style that I've assigned colors to all my links
    there. They work. But if I attempt to change the links in the main
    content it screws up the navbar links.
    So, now, I'm trying to assign the different colors to the
    links in the main content. I have the link color down but I can't
    seem to get the visited, hover, active to work.
    So, I read somewhere you have to assign a class to be able to
    have different colors for your links on the same page. There is a
    class assigned to the links I want to change but it only assigns
    the link color, not the visit,hover,active colors. I don't know
    where I am supposed to put the code so that only the main content
    links are changed. Here is what I came up with from reading and
    studying. Can somebody tell me what's wrong with it and where I am
    supposed to put what in each page? This is just a CSS style page I
    made and I have no idea if I even did that right. Then, I can't
    figure out how to tell each page to include it for that class only.
    Thanks.
    @charset "utf-8";
    /* CSS Document */
    <class="style49"
    <style type="text/css">
    a:link {color: #3333FF}
    a:visited {color: #009900}
    a:hover {color: #6600CC}
    a:active {color: #FF0000}
    </style> </class>

    Pseudo-classes and container styles are what you need - here
    are some
    tutorials.
    http://www.thepattysite.com/linkstyles1.cfm
    http://www.projectseven.com/tutorials/pseudoclasses/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Newbie744" <[email protected]> wrote in
    message
    news:fn3***$m6q$[email protected]..
    > Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying
    to get links to
    > be
    > different colors within the same page. I have a navbar
    with a CSS style
    > that
    > I've assigned colors to all my links there. They work.
    But if I attempt
    > to
    > change the links in the main content it screws up the
    navbar links.
    >
    > So, now, I'm trying to assign the different colors to
    the links in the
    > main
    > content. I have the link color down but I can't seem to
    get the visited,
    > hover,
    > active to work.
    >
    > So, I read somewhere you have to assign a class to be
    able to have
    > different
    > colors for your links on the same page. There is a class
    assigned to the
    > links
    > I want to change but it only assigns the link color, not
    the
    > visit,hover,active
    > colors. I don't know where I am supposed to put the code
    so that only
    > the
    > main content links are changed. Here is what I came up
    with from reading
    > and
    > studying. Can somebody tell me what's wrong with it and
    where I am
    > supposed to
    > put what in each page? This is just a CSS style page I
    made and I have no
    > idea
    > if I even did that right. Then, I can't figure out how
    to tell each page
    > to
    > include it for that class only.
    >
    > Thanks.
    >
    > @charset "utf-8";
    > /* CSS Document */
    > <class="style49"
    > <style type="text/css">
    > a:link {color: #3333FF}
    > a:visited {color: #009900}
    > a:hover {color: #6600CC}
    > a:active {color: #FF0000}
    > </style> </class>
    >
    >
    >

  • How to assign area in site (in sap Retail) for different article.

    Hi All Experts,
    Can you tell me how to assign the space in layout tabs of site master data(wb01) in retails for the different products \merchandise category.
    My aim is to see the contribution of article \Floor area  in the store.
    Ex- i have  mobile ,tv and washing machine
    now i 'll assign some area to these art(floor area)
    Like 200 Sq mm for mobile ,1000for tv and 1500 for washing machine.
    I want to assign in site master data so it comes automatically for every site.
    Now i want to see the contribution of all these article \Floor area  in the store.
    Looking for your valuable suggestion.
    Prashant

    Nachy,
    You can copy the overview iview  of type workset map iview from standard ess role and give the area group name in that.
    check the overview iview in the standard ess role
    give application parameters as sap.xss.menuargrp=area group name&sap.xss.menuhdr=header name
    Thanks
    Bala Duvvuri
    Edited by: Bala Duvvuri on Aug 5, 2010 7:35 AM

  • How to assign cost centre with position

    Hi Guys
    How to assign cost centre with a position?
    thanks

    Hi,
    Go to PPOM_OLD t code & select ur organisational unit.
    Then click on staff assignments & the GOTO in menu bar,click on Accounts assignment.
    Put cursor on the position & lick on master cost center icon & assign the cost center.
    Cheers
    Ramesh

  • Org Mgt-How to assign person for positions in bulk

    Hi Gurus
    Let any one share how to Assign persons to position in bulk manner
    i have tried lsmw program but not working properly.using ppom_old it is too difficult to assign for 250 persons.let any one sap hr doctor give me medicine to sort out this issue
    with regards
    partha

    Hi
    Very helpful sir
    and nicely worked
    keep sharing and mould sap aspirants like me
    with regards
    partha

  • How to assign a user and position to a release code .

    How to assign a user and position to a release code ?
    I tried in SU01 but the data is not getting reflected in the table
    T16FW. from where the rule (20000026) is picking the user .
    is there a transaction to do so ?
    Thanks in advance .

    These are done in SPRO. Search for release in SPRO, you will find your answer.
    Regards, IA

  • How to assign qualifications to positions?

    How to assign qualifications to the positions for the purpose of profile match up?

    In PO13 there exists the possibility to assign relationships from
    positions to qualifications, but therefore you have to maintain the
    relationships 031 and 032 for positions with qualifications/requirements
    in table T777E. So please check if you have following entries there:
    S A031/A032 Q and
    Q B031/B032 S
    Then in PO13 when adding a new relationship, you can choose the object
    type Qualifications and assign the right one to the position.

  • How to assign BP to BP?

    Dear all,
    I created a organization model having a ornganization unit (Marketing Div)
    Now i assigned Marketing Manager (Mr XXX) to the Organization unit.
    now i have two employees under marketing manager in same organization unit.
    Can any body guide me how can assign employee(Sale Exes)to the marketing manager??
    Regards
    jayesh

    Hi Jayesh
    You cannot maintain Employee hierarchy in CRM, but you can maintain only different positions at different levels. When you assign emplyees to a position, the employees will have a User id assigned to them which will determine who is what (referring to HR structure)
    My suggestion is create different positions at the same level of organizational unit, that doesnt mean one is superior/ subordinate than other (Unless you have different Org Hierarchies)
    But if you have a situation where you will have to use employee hierarchy (example:" workflows) you will have to assign more attributes at each position like approval amounts or any other differentiation rules in which case again it has to refer to HR structure by thier ID's given in the BP record
    Hope this helps

  • How to see the balance under different balance if special ledgers exist???

    Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
    I will focus on
    1. display voucher
    2. check GL balance
    Anyone have idea (detailed flow)/template (preferred) on these issues?
    Thanks a lot for your help in advance

    hi,
    /n----
    > acccounting -
    >financial accounting -
    >GL acccounts -
    > information system -
    > gl reports
    here in this path u can get all the gl list and gl balances list ....
    u can check what ever reports u want.....
    if useful assign points...
    regards,
    santosh kumar

  • How to Assign a Constant Value to a Dim. Member when pulling Master Data?

    BPC Gurus:
    I am trying load Vendor and Customer Master data into BPC dimension.  My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE.  I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR.  However, I
    need to have a ttext value for 'PARENTH1' and 'TYPE'.  For Customers, I want to add a FIXED value "'CUSTOMER' for every
    Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER".  When I maintainthe Dimension, I want to see
    th followingvalues:
    ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
    0000000001         WALMART                                            CUSTOMER                        CUSTOMER
    0000000002          TARGET                                               CUSTOMER                        CUSTOMER
    and so ON
    Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
    ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
    0000005050         ABC Supply Inc.                                   VENDOR                            VENDOR
    0000005051         BASF                                                    VENDOR                            VEDOR
    and so ON
    How can assign a Fixed value to the member Propert?  Can I achieve it in Conversion file....? 
    ( My atempts failed...).
    Any suggestion recommendation would be gretaly appreciated.
    Munna.

    Hi,
    For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
    Hope you got the idea.

  • How to assign a dynamic value to the value property of a button ?

    Hi Folks,
    I have a need, can i know how to assign a dynamic value to the value property of a button. Scenario is like follows...
    This is a struts based web application
    1. I have a file which consists of login user details (user name and his previlages) for a web application.
    2. I got those user details, into a List.
    3. When a user logged into the web app, in the home page there are few buttons. The type and number of buttons shown depends on the type of user/ user. (Buttons have different combination and the number of buttons available are not constant, they will vary from user to user).
    4. for each button, there will be a different action. I can pass the value of a button to an action class, but here button must have a dynamic value.
    Here is my test code:
    <%
    if (List != null)
    for (int i = 0; i <List.length; i++)
    %>
    <html:submit property="rduname" value= "<%=List%>" onclick="return submitRdu('<%=List[i] %>');"/>
    <%
    %>
    But my problem is how to assign a dynamic value to the value property of the button ( i know 'value= "<%=List[i]%>" ' will not work, just wanted show you guys).
    Thanks in advance,
    UV
    Edited by: UV_Dev on Oct 9, 2008 2:15 PM

    Let me try i know am not good at JSP but do we need double quotes here
    value= <%=List%>i think JSTL should help you about the dynamic thing                                                                                                                                                                                                                                                                                                                       

  • How to assign a voided issued check to another payment document

    Hi All,
    My client issued a check to a vendor from wrong check lot. Now my client wants to reverse the payment document as well as the invoice. They want to use the same check information for another payment document for the same vendor.
    We tried voiding the check and resetting the voiding data and then tried to assign it to a different payment document in fch5 but system throws the following error "Next free number in check lot 001 is 500030".
    How can I rectify this error?
    Regards,
    Khudavand

    Hi,
    Think in the practical scenario once.
    Once you have given a cheque to someone and understand thats the wrong name, you void the cheque.
    Its cancelled. You can do whatever before giving it to him. Once given, you need to void and thats it.
    The same will happen in SAP too.
    Cheque once voided, its voided thats it.
    There is no scope of adding this to another vendor/another payment document for the same vendor.
    Caio
    Raghu

  • How to assign version in sales order and transfer to PP module

    Hi all
    Users say that customer will require to produce/deliver old goods (we active revision level. The newest material version is D. But customer want version B). How to assign version in sales order and let PP user know the version customer want (MRP run and production order must use version B's BOM)?
    Regards,
    Rita

    Hi,
    i have a query if you have implimented ECM this will serve the purpose but it also depends on how good the planning is, in ur client site ( out of SAP ) where planner will plan according to the customer requirement as to which version to be kept active for a date range.The ECO analysts(functional) or consultants will make the ECO changes for those dates.
    In general for those type of customers (who needs old version) a different SO created under different document type which will create a production orders with specific order type depending on the assignment of requirement type and requirement class.
    those specific production ordertypes can be inturn assigned to either different plant where your old version BOM's will be active.
    You need to look into the custom settings in SAP to design the larchitecture to allign with other requirements.What i explained u is common methodology used.
    Hope this is clear..
    Prakash
    Message was edited by:
            prakash Uddagatti

  • How to do a SELECT from different tables into an internal table?

    How to do a SELECT from different tables into an internal table?
    I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
    REPORT  zinternal_table.
    TABLES:
      mara,
      marc,
      zperson.
    TYPES:
    BEGIN OF str_table1,
      v_name LIKE zperson-zname,
      v_matnr LIKE marc-matnr,
      v_emarc LIKE marc-emarc,
      v_werks_d LIKE marc-werks_d,
      v_dstat LIKE marc-dstat,
      END OF str_table,
      i_table1 TYPE STANDARD TABLE OF str_table1.
    DATA:
    BEGIN OF str_table2,
    v_mandt LIKE mara-mandt,
    v_ernam LIKE mara-ernam,
      v_laeda LIKE mara-laeda,
    END OF str_table2,
    itab_final LIKE STANDARD TABLE OF str_table2.

    first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
    u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
    then for all the entries in that internal table retrieve data from zperson into another internal table.
    then loop at one internal table
    read another internal table where key equals in both the tables.
    finally assign fileds if sy-subrc = 0.
    gs_finaltable-matnr = gs_table-matnr
    etc...
    and finally append gs_finaltable to gt_finaltable.
    there u go ur final table has all the data u want.
    regards
    Edited by: BrightSide on Apr 2, 2009 3:49 PM

  • E-Rec : How to assign applications to requisitions?

    Hello Experts,
    We have just started blue-printing of E-Rec and I am successful creating a requisition from Recruiter's page. I am just concerned how to assign applications to a requisition as search doesnt work being a very new system. I was trying to create an application using link "Create External Applications" from Recruiter's login page. Please guide.
    Additional details: We have ECC and E-Rec on different box with EhP5.
    Thanks and regards,
    SAP E-Rec Guy

    You can always search for postings using a reference code - TREX and the indexes do not need to be setup for that to work.  The create internal / external applications link is really used for a recruiter to create an application on behalf of a candidate.  You could always just register a new external candidate and search for the job posting using the reference code and apply that way.

Maybe you are looking for