How to assign a pricing type to the pricing procedure ?

Business Scenario : When the prices change from the time the order is taken to the time the invoice is created, how can setup the system to handle the changes automatically ?
I would like to know How to create a pricing type and How to assign a pricing type to the pricing procedure so that I can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document.
Thanks for your input in advance.
Oscar

Hi !! Oscar,
1) For pricing type definition you would require the help of a developer.
2) However, most of the commonly occuring requirements are supplied with standard SAP.
You can assign a pricing type to pricing procedure as follows:-
IMG>S & D >Basic Functions>Pricing>Pricing Control>Define & Assign pricing procedures>Maintain pricing procedure> Here, locate your pricing procedure , in the fourth coloumn using the drop down list, you can assign a pricing type to the pricing procedure.
Now you can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document !
Regards,
PATHIK
Message was edited by:
Pathik Pandya

Similar Messages

How to assign a dynamic value to the value property of a button ?

Hi Folks,
I have a need, can i know how to assign a dynamic value to the value property of a button. Scenario is like follows...
This is a struts based web application
1. I have a file which consists of login user details (user name and his previlages) for a web application.
2. I got those user details, into a List.
3. When a user logged into the web app, in the home page there are few buttons. The type and number of buttons shown depends on the type of user/ user. (Buttons have different combination and the number of buttons available are not constant, they will vary from user to user).
4. for each button, there will be a different action. I can pass the value of a button to an action class, but here button must have a dynamic value.
Here is my test code:
<%
if (List != null)
for (int i = 0; i <List.length; i++)
%>
<html:submit property="rduname" value= "<%=List%>" onclick="return submitRdu('<%=List[i] %>');"/>
<%
%>
But my problem is how to assign a dynamic value to the value property of the button ( i know 'value= "<%=List[i]%>" ' will not work, just wanted show you guys).
Thanks in advance,
UV
Edited by: UV_Dev on Oct 9, 2008 2:15 PM

Let me try i know am not good at JSP but do we need double quotes here
value= <%=List%>i think JSTL should help you about the dynamic thing

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How to assign an output type to an Output Device?

How to assign an output type to an Output Device?
I'm using SSF_GET_DEVICE_TYPE to get the device type. But for that device type there is no output device configured. How to do that one. I'm getting the output type as PDF1.
Please help me.

Hi,
Guess u need to maintain it in SPAD transaction.
Cheers
VJ

How to assign 2 Delivery Types to a single Internal Confirmation category ?

Hi all,
According to this transaction OMGZ that assign the Delivery type to the Internal Confirmation categories, I'll like to assign another Delivery Type to the Internal Confirmation category "2 Shipping Notification".
I previously created a new Confirmation Control Key (0005) copy from the 0004 for the P.O & a new Confirmation category ZA (copy of the LA - Inbound Delivery).
My issue is how to use the single Internal Confirmation category "2 Shipping Notification" to the both Inbound Delivery Types ZEL (copy of EL) and ZAL (copy of ZEL) ?
Thanks for your reply !!!
Ed

Hi Steve,
Thanks for your reply. I know that SAP standard system can't have two. My Client want to distinguish between 2 Delivery Types used for different businesses in the same SAP system. As every Inbound delivery Type will be used in other Z developpements programs. And we don't want to create confusion in our figures. But I thing we can use another PO type to make it.
Ed

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to assign static ip address to the server having solaris 10. i.e. nge0

hi,
how to assign static ip address to the server having solaris 10. i.e. nge0 i.e. 192.168.3.125 ipshold be persistantt across reboots. what steps do i need to follow to put all information including gateway,netmask etc..Also i want to integrate one init script ..can i integrate it using /etc/init.d/<service name> like linux. and do chkconfig on it?i am not getting complex procedure of SPF and FMRI etc..can u help me?

Create a file in your /etc directory called hostname.nge0. Add the hostname of your system to this file. In your /etc/hosts file, assign the static IP address you want to the same hostname. You can then disable and enable the network-physical service to configure the network interface:
svcadm disable network-physical
svcadm enable network-physical

How to assign single responsibity to all the applications user?

how to assign single responsibity to all the applications user?
Thanks in advance

Use FND_USER_PKG.AddResp
How to use FND_USER_PKG.AddResp
Re: How to use FND_USER_PKG.AddResp
single responsibility to all users
Re: single responsibility to all users

Invoice pricing procedure not using alt calc type from the pricing procedur

The sales order has the same pricing procedure as the invoice but when the invoice is created it is not using the alt calc type that is on the pricing procured like it is on the sales order. This is causing one of the condition types to have different values on the sales order vs. invoice.
I am not sure what other areas to check to see why this is happening. Any thoughts?

I have checked and in the copy controls for Delv type = LF and target Bill type = F2 the Pricing Type = G (copy pricing elements unchanged and redetermine taxes). Condition types such as ZPR2 where there is condition record copy in correctly to the invoice. It is condition type ZZIF where it is determined from a routine, not a condition record, where I am having this issue.
Is there another place in config that I should be making a setting so that condition types determined by routines are copied to the invoice without being redetermined at invoice create?

Okc/okx table that contains Transaction Type from the pricing/billing tab

We are running 11.5.9 EBS, and the module is Service Contracts Authoring.
I have a sql script that pulls data from the header and subline level for service contracts. If possible I would like to get the Transaction Type form the Pricing/Billing Tab. Summary > Pricing/Billing - submenu "Billing". I have not been able to find a table in OKC or OKX that contains this Transaction Type ID which can be tied back the cust_trx_type_id in the AR.RA_CUST_TRX_TYPES_ALL and in turn get the NAME for the transaction.

I'm not sure where the cust_trx_type_id would be stored in OKC/OKS tables, but the table OKS_BILL_TRANSACTIONS stores the trx_number that you can link to ra_customer_trx_all and get the cust_trx_type_id.
HTH
Alka

Output type beside the output procedure while asigning to sales doc header?

Hi All,
T-Code v/43   (Sales Doc Header - output assignment )
Please can any one elaborate why do we need to specify output type beside the output procedure while asigning to sales doc header.
please explain me its use and significance.
thanks and regards/ashu

Hi Ashutosh,
            1. The output procedure will be one for total sales documents but if you want to assign different output types to different sales document types which are in same output procedure you can use this.
             2. You can restric the output type based on the document type.
I hope it will clear for you,
Regards,
Murali.

How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type - enter
enter partner role & other parametrs

How to Activate a Condition Type in the Tax OCde for A/P -- Very Urgent

Hi Peers
I'm creating a new Tax Code in T.Code FTXP, while creating, One Condition Type is Deactivated, say JM01, How to activate that condition Type. I know how to activate the Condition Type in A/R side but I want to know it in A/P side. Plz help. Its very urgent.
Regards
Rajaram

Hi Rajaram,
U pls Check ur configuration. First u check the calculation procedure (F.A- Tax on sales & purchase-Basic setting-Check calculation procedure _ Define procedure) In the procedure field u check JM01 is activated or deactivated otherwise u created in condition Type.
I think its usefull otherwise u let me know
Thanks
R.Manigandan

How to assign a unique number to the name column of a document set?

How can I assign a unique number to the name column of a document set preferably with workflows? (Perhaps this number can increase by one each time a new document set is created)
When a user attempts to create a new document set, this unique number should be already there as the name of the document set.
(However, It seems that access and edit the Name column is more tricky than the other columns)

Hi，
To use document ID instead of Name column, you can
Modify View and hide Name column. Then make Document ID to display at the left column.
By default, document ID will be assigned to both document items and document sets. You may
experience delay before you can see document ID assigned to existing document items and document sets because the scheduled document ID assignment timer jobs haven't finished yet.
Miles LI TechNet Community Support

How to assign a pricing type to the pricing procedure ?

Similar Messages

Maybe you are looking for