How to assign default values to "Start task process" SPD2013 action

I am creating a task in SPD 2013 list workflow using the "Start a task process" action. I have the ContentTypeId field set as i need to have some specific fields to be displayed in the task form.
Is there anyway to assign values to these fields?. My goal here is to fetch some values from the "currentItem" fields and display in the Task form during the approval. So that the Approvar don't need to go and see the actual list item.

Hi,
If you would like to display fields about current item in Task form, please click
these user in Workflow, and
Start a Task Process dialog pops out. Then click Open editor for body >
Add or Change Look up, then you could retrieve field data.
For clearly:
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

  • Assign initial values to starting task

    Hi,
    I have defined workflow, which starts when Goods receipt occurs. In my WF container I have an element with type ZMKPF, which stores values about GR. After the completion of GR, a number of agents receive work item with the proposal to post invoice.
    If user clicks to this proposal, task with element ZBUS2081 and "create" method starts. Now I need to populate fields in starting TCODE MIRO with initial values. For example, I need to put DOC_DATE in zbus2081 from zmkpf. Is it possible? Is it right approach or I should look for enhancements not linked with workflow?

    Hi, Рустем!
    I suppose, there are both workflow-specific and MIRO-specific things to do to implement this requirement.
    As I get it, your method CREATE looks something like this now:
    CALL TRANSACTION 'MIRO'.
    To pass defaults you might change it (or create another method) like this:
    (1) get defaults from the workflow
    (2) put defaults into memory or set\get parameters so that MIRO could use the values as defaults
    CALL TRANSACTION 'MIRO'.
    The first part is workflow-specific - you'll have to add some parameters to your BOR method to pass the values. Have a look at method BUS2081.CreateFromData as an example.
    The second part is MIRO-specific, which is beyond this forum. Probably, this can help: Default Values In Miro Transaction. | SCN

  • Amx:inputText how to assign default value

    How do I assign a default value to the amx:inputText field please?

    You assign it to it's value property.
    Timo

  • How to assign default values to fileds in the org. tab of an oppurtunity

    hi Experts,
    I created a new org data profile and assigned it to a transaction type.
    The org. tab consists of
    org. unit
    sales Org.
    Distribution Channel
    Sales Office
    Sales Group
    out of which first four are mandatory.
    Now I need to populate "10" in the distribution channel field irrespective of whoever logfs in.
    At present a list of sales offices and distribution chaneel popups up for selection by the user.
    In my business scenario, I don't want the distribution channel to be taken from there instead it should hold a default value "10".
    Pls help me in this.
    regards,
    Arul jothi.A

    Hi Arul,
    You can implement BADI 'CRM_ORGMAN_BADI' to populate the distribution channel field by default.You are to code in the method 'CRM_ORGMAN_MERGE' . The code you will have to write for defaulting value will be something like this :
    CODE :
    method IF_EX_CRM_ORGMAN_BADI~CRM_ORGMAN_MERGE.
    data : lv_guid type CRMT_OBJECT_GUID,
           lv_process_type type CRMT_PROCESS_TYPE.
    finding the process type *****
    lv_guid = is_orgman_wrk-REF_GUID.
    CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
      EXPORTING
        IV_ORDERADM_H_GUID               = lv_guid
    IMPORTING
       EV_PROCESS_TYPE                  = lv_process_type
    EXCEPTIONS
       ADMIN_HEADER_NOT_FOUND           = 1
       OTHERS                           = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *********defaulting value if process type is opportunity(OPPT)
    if lv_PROCESS_TYPE = 'OPPT'.
    cs_orgman_badi-DIVISION = '10'.
    endif.
    endmethod.
    Hope this solves your problem.
    Regards,

  • Select-options How to assign  Default value as "Not equal to something"

    My req. is to asssign default value for a select-option as <> "DS1" . I am able to give default value as DS1 But dont know how to give "<> DS1" . Please help me
    Thanking u in advance ..

    INITIALIZATION.
    s_lifnr-low = '0001'.
    s_lifnr-high = '0002'.
    s_LIFNR-sign = 'I'.
    s_lifnr-option = 'NE'.
    append s_lifnr.
    Regards,
    Subramanian V.
    P.S. - Raja, still mode = BSP ??? :-P
    Message was edited by: Subramanian Venkateswaran

  • How to assign default values for a timestamp column in a table?

    Hi
    Thank you for reading my post
    how i can make a column in a table to be autofilled with current timestamp ?
    for example when i create a table i want its timestamp field to be autofilled with current time stamp whenever a record generated.
    Thanks

    TEST@db102 SQL> create table test(a number primary key, b timestamp default systimestamp);
    Table created.
    TEST@db102 SQL> insert into test(a) values(1);
    1 row created.
    TEST@db102 SQL> select * from test;
             A B
             1 03-SEP-06 05.56.34.995319 PM
    TEST@db102 SQL>                                                            

  • Help needed on how to assign string value to variables in process designer

    Hi,
    I am using LC Workbench 8.0.1 version, I have a business requirement where in my form I have a dropdown box which contains two options i.e,
    1. Accept
    2. Decline
    If the user selects Accept, I have to route the form to user some "x" or if the user selects Decline then the form should be routed to some user "y" .
    To implement this I need to capture the user selected value which is a String.
    can someone explain me how to reslove this..?
    thanks and regards,
    sudheer

    I'm assuming you're using a xfaForm variable that points to an XDP in the repository to render your document.
    In that case, you set the Form Data Mapping to point to that xfaForm variable in the User step.
    When the user submits the form the xfaForm variable contains the data for the form in an XML format. You can have multiple routes that come out of your user step that will check a certain value in the xfaForm variable.
    The xml data for you form will be located under the /process_data/xfaForm/data/datasets/data node.
    You can use an xPath similar to /process_data/xfaForm/object/data/xdp/datasets/data/myNode/MyField
    you can also use the // notation to do a full search within the data node if you're not sure of the structure:
    /process_data/xfaForm/object/data/xdp/datasets/data//MyFieldValue
    I hope this helps.
    Jasmin

  • How to set default value to input field dynamically

    Hello Experts,
    I am using adobe forms inside Webdynpro Java.
    Adobe form is having few input fields where at run time i want to assign default value to those fields.
    How can i do it ?
    Thanks in advance,
    Vinay
    Edited by: VINAY on Feb 24, 2011 6:39 AM

    Hi Mate,
    Just set the value to the webdynpro context fields on view init.
    if its like that will override the values entered by use on the form.
    just check if the default value is equall to the field value if yes leave it, if not dont touch that field.
    does this make sense...?
    Cheers,
    Sai

  • How to set default value in OAMessageLovInputBean?

    Hi,
    How to set default value in OAMessageLovInputBean while loading the page?
    I have tried the following code but its not working.
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
    Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    OAViewObject poHeadervo =
    (OAViewObject)am.findViewObject("PoHeaderMergeVO");
    PoHeaderMergeVORowImpl poHeaderVoRow =
    (PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
    if (delToLoc != null && !"".equals(delToLoc)) {   
    // poHeaderVoRow.setShipToLocation(delToLoc);
    OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
    msb.setValue(pageContext,delToLoc );
    Please suggest me how to resolve this issue.
    Thanks & Regards,
    Sunita

    Hi Cristoph,
                      We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
    Nay idea if we can achieve this....
    Regards
    Bhuwan Tiwari

  • How to make default values in selection field?

    hi,
          i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
    DATA: LT_RANGE_TABLE TYPE REF TO DATA.
    CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
      EXPORTING
        I_TYPENAME                     =     'QENTST'
      RECEIVING
        RT_RANGE_TABLE           =     LT_RANGE_TABLE.
    CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
      EXPORTING
        I_ID                                     = 'QENTST'
        IT_RESULT                         = LT_RANGE_TABLE
        I_OBLIGATORY                 = ABAP_TRUE.
    What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
    Thanks In Advance.
    Saurin Shah

    Hi,
    Refer this Article by Thomas on how to make default values in Select Options:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
    I hope it would solve your problem.

  • How to populate default values for BP (FPP1 is  tcode in ECC 6.0)

    Hello ,
    I am creating BP in ECC 6.0 using Fpp1 tcode.  How to populate default values when i hit create BP person.   any badi  triggers when we are creating BP in ECC.
    guide me.

    Hi Premanand,
    To default fields, you need to do the following steps :
    1. Create a Z module e.g. : Z_DEFAULT_FIELDS_DIALOG.
    2. Enter suppose you want to default fiels Name, title, country, write code as follows  :
    DATA : ls_busdefault LIKE busdefault.     
      ls_busdefault-title = '0002'.
      ls_busdefault-mc_name1 = 'TEST'.
      ls_busdefault-mc_name2 = 'Default'.
      ls_busdefault-country = 'IN'.
        CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
        EXPORTING
          i_busdefault = ls_busdefalut.
    3. Now got to transaction BUS7, select event ISDAT, click on Event--> function modules.
    4. Register your Z module Z_DEFAULT_FIELDS_DIALOG in this list, Save.
    This should solve your problem. Please note : You can only default those fields contained in structure BUSDEFAULT.
    Cheers,
    Rishu.

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • How to change default value in a table using ALTER TABLE

    Hi,
    How to change default value in a table
    I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
    I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
    Any help will be needful for me
    Thanks and Regards

    user598986 wrote:
    Hi,
    How to change default value in a table
    I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
    I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
    ALTER TABLE  test
    MODIFY (indicator DEFAULT 'I'); 
    Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
    Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

  • How to assigne multiple value in key of read table

    Hi gurus,
    I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
    how to assign multiple value as key for the same field while reading internal table.
    Regards
    sagar

    Hi ,
    You can loop the internal table like
    loop at  <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
    or you can write two read statements to read the internal table in wrk area.
    read table   <table xxxx> with key field1 = ' xxx'.
    if sy-subrc <>0
    read table   <table xxxx> with key field1 = 'yyy'.
    if sy-subrc = 0
    endif.
    else.
    do your data processing.
    endif.
    Thans.

  • Assigning Default value to a Infotype Field

    Hi,
    My requirement is to assign default value to the loan amount field of the loans infotype(0045).
    I am using the PBAS0001 user exit program ZXPADU01 and taking the basic pay amount for the employee from infotype 8 and assigning it to pa0045-dabrt(loan amount)field in infotype 45. But the problem is the loan amount field in 45 infotype is of the type currency(13 characters) and if i assign a value 2000 to the field its displaying as 20,000,000.00. That is the value is being multiplied by 10000 and is displayed. When i tried to divided the value by 10000 and pass it, for odd numbers its not working.Can Some one provide the solution for this problem.

    Try using simple Formula at field level insted of field routine.
    there is IF( <condition>, <result when true>, <result when false> ) option avaialble in formula
    Regards
    Sudeep

Maybe you are looking for