How to Automatically Set Allow in Network peer Assisted Settings

Hi I am working on cirrus. my application size is two small that settings popup is not showing. and by default it is set to deny....how can I set it to allow by default

Hi, I'm not sure what Program you are using, but Flash Player is a browser plugin. You may want to post on another Adobe Forum, as the Flash Player Forum is for the end user issues.
Thanks,
eidnolb

Similar Messages

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

How do I set up a network hard disk so I can restart my MacBook from it?

I have a 2TB Freecom XS Network hard disk, and I want to be able to restart my MacBook from it with my current OS, Leopard 10.5.8, when I have upgraded the OS on the MacBook to Snow Leopard 10.6.3 [as a possible precursor to Mavericks or even Yosemite]. The problem is that the MacBook doesn't recognise the XS as a network disk: the XS has been assigned an IP number, and I can mount it as a server volume, and I have copied all the system folders/files onto it, but that is no use if the system doesn't recognise it as a network disk for a restart [I've tried]. The system/library/users/applications folders are in a Macintosh HD folder as on the MacBook, but this folder is inside a root folder named PUBLIC: could this be part of the problem? I thought I might be able to reinstal the OS on the network disk using the original system installation discs, but after restarting the MacBook as instructed, the network disk isn't recognised as a destination for installing the OS. I don't want to instal Snow Leopard on the MacBook before I'm sure I can reboot it with Leopard, using the network disk.

Hi BDAqua.
Thank you for your reply. I don't know how much what I omitted to disclose in my original post might affect what you've told me, but I have a wireless network set up with a 500GB Time Capsule, to which a broadband router and another backup disk [1TB, daisy-chained to the TC] are connected. Given the difficulty I had initially, setting up the network [mainly because of my ineptitude where comms are concerned], I didn't want to risk connecting the Freecom drive to the TC, in case it changed the network settings [or worse, disrupt my internet access], and I haven't done it hitherto. I did try connecting the ethernet cable to the wireless router however, with neutral results: still possible to manually mount the drive as a server, and it shows in the Network folder in my MacBook's root folder.
Further to an email from Freecom's support department [effectively just a request for part number, proof of purchase, etc.], I followed their suggestion and tried connecting the drive to the MacBook using the USB 2 cable, and the drive showed up in the device section of the Finder window sidebar, but I would guess that this option wouldn't enable the drive to function as a boot drive either? Also, unless I'm mistaken, USB offers much slower data transfer speeds than Gigabit Ethernet? I'm hoping I've not dropped a monumental bollock, because I'm positive from my pre-purchase research that Gigabit Ethernet is faster than FireWire or USB2, which is why I chose this drive over cheaper USB drives [like the 1TB Western Digital drive daisy-chained to the TC]; or am I mistaken?
To get back to your answer though, I don't dispute what you say, because I'm sure I'm much less of an expert than you might be, but I would nevertheless like to be able to boot up from the Freecom drive, if a way to do that is possible, even if it means biting the bullet and connecting it to the Time Capsule [assuming that this will work: can you advise?], without needing to investigate and purchase additional kit. I've had a scan of the forum, and I've seen a few suggestions which mention cloning, but I don't know how this works: I presume I'd have to buy the appropriate app for that? Your answer seems to suggest installing the new OS onto an external drive [although, worryingly, you don't mention Ethernet as an option] using cloning, so I'd be grateful if you could explain that.
I just hope that my desire to save the cost of a newer Mac of some description, be it new or refurbished, but giving me the newest OS possible on the MacBook [Yosemite, I'm guessing], doesn't end up costing me something uncomfortably similar, cumulatively.
Any practical and reasonably-priced suggestions welcome and considered! Thanks again

How to automatically set Print Scaling to 'None'

Is there any way to automatically set print scaling to 'none' on an existing PDF document?
This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
Many thanks in advance for your help!!!!
HJ

Would something along these lines would work???
"if printing 1:1 is critical, my recommendation would
be to have an area on the page(s) for which scaling must be performed
where you explicitly state the requirement for no scaling AND in which
you place an line of known length, let's say an inch or a centimeter with
text that warns that if that line is not exactly at the size specified,
to reprint without scaling."
(extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

How do you set up the Do not disturb settings?

Does anyone know how to set up the do not disturb settings?

go then to notifications touch the do not disturb and gives u the options from whom is to be allowed and the times

How do I set up ethernet network having attached a MoCA adaptor from cable inlet into modem? It seems I need a "self assigned IP"?

I live in an old apartment building with very thick walls, and have a miserably spotty wireless network. In hopes of creating an undisturbed ethernet network for my computer and various other gadgets, I purchased two ActionTec Moca adapters, and set it up as suggested in a helpful review on Amazon: put one MOCA adapter "upstream" to the cable modem. The incoming coax with the Internet signal would plug into the MOCA "in" port then the MOCA's "out" coax goes into the coax on the cable modem. Then the LAN port on this MOCA goes into a LAN port on the switch/router. The Ethernet port on the modem goes into the WAN port on the same router. This "triangle" of connections is confusing to someone who is not networking savvy because they assume that all network connections have to be linear." The adaptors light up as they are meant to, indicating that the signal is there, and my iMac tells me thatDiagnostics window tells me that the internet connection appears to be working correctly." Only the little button in the Network Diagnostics panel next to 'Network Settings" is yellow. When I run the Setup Assistant, it says that "You cannot connect to ISP automatically, so you need to enter information to set up your connection. Selec the appropriate item then enter the required information. If you don't kow the infromation, contact your ISP." I checked "I have a DHCP Client ID and entered my IP address as copied from the network panel. It said congratulations you are now connected to the internet!" But then no browser window window would open, and Safari said "you are no longer connected to the internet". What did I do wrong?

I wouldn't expect the oMoCa adaptors to issue IP numbers, simply act as a passthrough to get the connection to the modem. It's not clear how you've got this set up or how the Airport comes into it.
From what you say the modem has several ethernet outputs - is this correct? - then you are directly connect to it by cable; and possibly an Airport Extreme is also connected to it.
Unless you are connected to the Airport either by cable or wireless it doesn't come into your own connection, though other computers may be connected through it.
If all this is as I described the modem must issue the IP numers and the Airport must have 'Connection sharing' in the 'Internet' section (after clicking 'Manual setup) set to 'Off (bridge mode)'. Then it simply passes the IP numbers issued by the modem through to any computers connected through it.
If the modem has only one ethernet output socket then it will be connected to a router (either the Airport or something else) through which everything else is connected, and that router should be set to issue the IP numbers as the modem will simply pass through the IP number issued by the ISP.
Whatever set up you have, you can only have one device issuing IP numbers or problems will result.
Your own Mac should be set to 'obtain an IP number automatically' or 'Use DHCP' (the same thing, and don't use 'DHCP with manual address). The number you are issued with will be in the 'local use' range, probably beginning with 192, and is not the same as the IP number seen by the outside world.

How to automatically set transitions including overlap?

I have a question about default transitions between video clips (and their associated audio tracks) in Premiere Elements 11.
What I want to happen is that each pair of clips is overlapped through the transition (eg around 25 frames/1 second for PAL video which is my source) when new clips are added to the timeline - audio and video both. I do not want repeated frames.
I cannot work out how to make this happen without manually dragging each of the clips along the timeline after they are added, one at a time.
If I set defaults first and then add clips to the timeline, the transitions aren't applied automatically; when I then select all clips and apply the default transitions, I find that the clips still butt up against one another end to end, not overlapped, so there are repeated frames. I am a recent convert from a much older versions of Vegas Movie Studio where this behaviour was an easy default and am finding it frustrating trying to replicate what seems to me like an obvious requirement, so any pointers would be much appreciated.

Thanks for this, ATR, your page explains the interaction between the trimming and transitions nicely.
Unfortunately I think this might confirm that what I'm looking for is not available as a "set and forget" option in PE11.
If I understand correctly I need something like the following workflow:
- Trim the clip (each clip) manually - by zooming in and dragging the handle till I have taken a second off the first clip which takes a bit of trial and error (no autosnap to one second?), then zoom back out, go to the end of the following clip, zoom back in and do the same, and allow ripple to work its magic.
- Select my one transition and drop it into place, then make a position selection (left, right or centre) from the dialog that pops up.
- Then select an audio transition and drop it into place, and get frustrated with my inability to select 'centre' as only left or right are available to me. - correction, I've just discovered that *after* being able to select only left or right, I can then drag the audio transition where I originally wanted it on the timeline as yet another separate action.
- Rinse and repeat for each of my clips in the timeline...
- Then repeat all the above for all the projects I'm currently stepping through, all of which are essentially the same structure - I'm doing a one-off capture of a bunch of old MiniDV tapes before disposing of a camcorder.
Am I right, or is there actually a "save this behaviour as the default" option that I simply haven't found yet? If so then I might end up dropping back to Vegas to simplify the clip handling as it does support this default transition arrangement.
Thanks

How do I set up printer network with my two macs?

I tried to find an answer to this "newbie" question but didn't seem to find exactly what I am needed to know.
We have a desk top Mac G5 (Tiger) that belongs to my partner (lets call that Jim's Computer) which is connected to an HP 6310 printer via USB. I have a new Macbook (Leopard) that I use exclusively with the Airport terminal. I need to be able to click print on the laptop what ever office I am in, and go to the main office and get my page off the printer. Both computers are on the same connection, the airport is a branch off the main hub.
We have set both computers to "share printers" on all accounts. My Macbook sees "Jim's Computer" and will subset it so I can actually see all three user files on his computer (Jim, mrbarth, B&B guest). I can easily access my folders and files in my accounts from computer to computer via Airport this way. I can not, however, use the printer function. I also need to point out that his computer is password protected for his account(Master) but I have access to both my account and guest account files if this makes any difference.
Here is how I have both computers set up. Please tell me what I am doing wrong or what I need to add to make this work.
On the main Desktop (w/printer attached) I have the printer Info which states its location at "Jim's Computer", its host name with a "lot of numbers plus our Internet service provider's CC.shawcable.net". It is set on the master and other accounts to share printer. On my laptop I have (under options and supplies) Location "Jim's computer" and host name "localhost". I also have the printer configuration to share on my Macbook.
Do I need to somehow change the location of my Macbook configuration to read something like: "Jim's computer/mrbarth" or "Jim's computer.mrbarth"?
Sorry for not understanding this. I am sure it is very easy and I just have one thing in the chain wrong. I am still a newbie on this even though I have been at the keyboards for over 10 years.

First, you need to try logging into his admin account and trying to print. If that works then most likely there's something he must configure for the account you normally log into on his computer to allow a remote user to print.
Second, consult the printer's manual to ascertain what if anything may require configuration to allow wireless printing. It's also likely that if you cannot print wirelessly that it's a problem with the printer driver that was selected when you added the shared printer. If there's a GutenPrint driver for you printer model try using it instead of the manufacturer's proprietary driver. If you don't have these drivers installed you can install them from your OS X Installer Disc's Optional Installs installer or you can download them at VersionTracker or MacUpdate.
Usually troubleshooting this type of issue requires starting from the basics. First be sure you can print when the printer is connected directly to your computer. Then check to be sure you can print with the printer shared from the other computer without any sort of imposed protections, firewalls, etc. Since this is a USB printer be sure you enable Printer Sharing on the computer to which the printer is connected. File Sharing is not a requirement for printing, but Printer Sharing is. Once you determine things are working with the most basic setup, you can start adding in each piece to the final setup checking along the way until either everything works or you find where it stops working. You can then start troubleshooting that issue.

How do I set one wifi network as preferred?

We have 2 wifi modems at home as the signal is bad in some parts of the house with just one. So I have set up another as a relay. However, all of our apple iPads/iphones automatically default to the one modem we use the least. Even if there is no signal bars at all it will default to that modem and never chose the other one which it is set up for unless I manually change it every time I wake up the ipad. I have tried forgetting the network and then putting them back in in different orders. But same problem always occurs. Is there a way to set one network as the preferred first choice network without deleting the other one completely? Many thanks

system prefs>print and fax>print and you'll see a pulldown menu labelled Selected printer in print dialog. It defaults to Last Printer Used, but you can choose a specific printer if you want that for your default.

How t o set up a network between G4 and a PC running XP

I read with interest the responce to a recent topic on a similar theme. I already have a home network involving 1 x G4 PowerMac running OS X 10.4.9, 1 x G4 PowerBook running OS X 10.4.8, 1 x G5 PowerMac running OS X 10.4.9 and a PC running XP. My problem is accessing the Macs from the XP and I though I might have solved it by visiting the mac-connect.com site refered to in the topic. However the set up procedure outlined at mac-connect involves input by editing the user account data through systems preferences but I'm not able to see those screens on any of my Macs? Consequently, I'm wondering if they are based on an older version of OS X and if so, whhat is the procedure now?

Hi John,
You wouldn’t believe how long it’s taken me to find a satisfactory solution to this particular facet of my networking issues. Then just recently I discover this forum and bingo! – in a quiet sort of way, you’ve given me what looks to be the answer. Well all I can say is award yourself the CDM, or whatever is your favourite sweet or tipple. I’m not so sure about the sharepoints yet, I seem to be swapping the files I need to ok, but I haven’t tested it to the full yet.
Thanks again
Geoff

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

HT1695 how to automatically join known wifi network?

My old iphone joined known network automatically but my new Iphone 4s i have to do it manually everytime.Anyone have any idea?

OS X Lion: Choose preferred Wi-Fi networks

How would you set up this network?

ingredients: Mac Pro, Macbook Pro, Apple TV, 1 G airport express, 1 N airport express, Airport Extreme Bass Station, 1 medium sized 1 floor apartment.
the current problem is that the network runs perfectly except for my main computer - the Mac Pro (1 year old) which always disconnects and gives me constant problems. would be nice for everything to work well so i can finally play music throughout the place.
wireless N? G? mixed? extend the wireless signal? interference robustness? and most importantly - how can i choose a channel that i know the neighbours aren't on?
any help appreciated! this has been driving me mad for 6 months now

thanks for the help! by going N I lose 1 airport express but it's worth it if it will fix things.
Like many people on here i have changed settings 9000 times to try and get the airport expresses from dropping out when streaming to them.
The main problem is the airport card in this Mac Pro - I think it is a bad one.
Running a cable would fix things probably although I dont really want cables running through the apartment, I think I will do this to avoid any further headaches.
Thanks for the input! Maybe in 1 week I will be able to buy a new Mac Pro with a new Airport card - depends on the expo!

How to automate joining an invisible network?

Greetings,
Anyone know a way to automate joining a network that isn't visible so I dont have to type the name and password and everytime?
Thanks

Chuck Risher wrote:
"System Preferences>Network>Advanced. Check the box "Remember networks this computer has joined.""
That is already checked.
Invisible networks do not show in the AirPort menu.
I have to choose "Join Other Network..." and type in the name and password every time.
That's the purpose on an invisible network. Unless this is YOUR private network and you have to constantly be asked to join it.
Plus open System Preferences->Network pane, the 'Advanced' button. Make sure the name of the invisible network is at the top of the Preferred Networks, if you constantly join that network.

How to Automatically Set Allow in Network peer Assisted Settings

Similar Messages

Maybe you are looking for