How to avoid multiple session for the same username

I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

Similar Messages

Multiple sessions for the same user

Hi,
The scenario is like this. The user is logged into the system using JAAS and
has a session object created. I want to create a new session for the same user
with the already available credentials. This is to provide the same user the access
to the application in another window with different session object. How can do
that in Weblogic 8.1 server ?
thanks in advance,
Krishna.

Hi
I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope this helps
Best regards
Joaquin Camarero Muñoz

How to use multiple Interfaces for the same BS?

Hi @ ,
Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
Any help will be highly rewarded
Regards

Hi-
Yes it is possible you can use multimapping for mapping the interfaces.
To know more about multimapping see
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
Some more helpful links
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

How I have multiple KPIs for the same measure?

Hi there,
I am finishing up a PowerPivot data model which gathers information from a service desk system, and different customers have different SLA targets.
I know I can specify a KPI for each measure that I create. However is there a way to specify multiple KPIs the same measure, or any other way/workaround that can meet the requirement outlined above?
Thanks in advance for the help.
Regards,
P.

Hi pmdci,
According to your description, you want to specify different target for different customer when creating KPI based on same measure. Right?
In PowerPivot, when we create a KPI, we can only specify calculated field or absolute value as target. We can't put any expression or function to specify a dynamic value as target value. Based on my knowledge, this requirement can be achieved in Reporting
Services. We just need to create a Variable and use Switch() function in expression to set specific values for different users. In this scenario, it seems can't be achieved in PowerPivot currently. I suggest you post this thread on PowerPivot forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlkjpowerpivotforexcel
You may get some more effective advice there.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to avoid multiple copies of the same application in Web Start cache?

We have an environment where there are several HTTP servers carrying the same Web Start application.
Is there any way to prevent Web Start from installing another copy of the same application in a client machine's cache if the user hits an HTTP server that is not the one the application was already installed from?

There is no way WebStart can know that an application from one server is actually the same as an application from another server, so I don't think this is possible.

Multiple entries for the same company.

Anybody out there have any idea how to enter multiple entries for the same company in Mail without having to enter all information every time for each individual. This was a very basic feature in MS Outlook. Possibly a workaround if not an option within Mail? Thanks.

Select a card with the details on it, and Edit/Copy /Edit/Paste (Command-C Command-V). Now edit one of the cards with the new individual's details. If starting from scratch, create a company card with no personal information and duplicate it as needed.
AK

How to avoid multiple listing for same artist?

How to avoid multiple listing for same artist?

Sounds like there might be blanks in the artist name.
For instance "Lou Reed" and "Lou Reed_" will not match.
(Pretend the underscore _ is a blank).
Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

WebTools Creating multiple users for the same User

I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
This is occuring for several users in webtools.
What causes this and how do I fix it?
Thanks,
Craig Spehar

Hi Craig,
There are two ways to cause this that I am aware of:
1. Change the "Business Partner Synch Contacts Field" setting after the initial synch.
2. Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
After that, update the user in WT and synch. (might also happen if you update the BP in B1)
Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed. When it does not find it, it assumes it needs to be created. This results in a duplicate.
The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
Then delete the last created duplicate contact from B1.
There may be further data corruption issues here. If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
FYI, whatever caused this was probably at the root of your order problem as well.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

Multiple alerts for the same Message ID

Hi
I have configured outbound ftp adapter. I have configured alerts inorder to capture any error in the adapter engine.
Now,alert is triggered showing an error in the ftp adapter ( say incorrect ftp details). But i get multiple alerts for the same message ID several times. I have also set the parameter Max No od Delvs to 1 in the ALRTCATDEF transaction.
I keep getting the same alert number of times a day. How can i restrict the number of alerts to 1 for 1 message ID.
Regards,
Vani

Hello Andreas,
Thanks for your reply.
In my scenario i would need an alert per Message. That is the reason why I have not checked the option "Supress Multiple Alerts" since it would allow only alert per rule.
Is there is any way we can get one alert per message.
Also, after correcting the eror in the file adapter will the file which was not placed due to error in the adapter be placed automatically. I wanted to know what would happen to the lost file or unprocessed file since it dint reach the destination due to error.
Regards,
Vani

Multiple Faces for the same person

I found this unanswered archived post, which is expressing exactly the same problem I'm having...
http://discussions.apple.com/thread.jspa?threadID=2099862
When tagging photos there are multiple entries for the same person listed. In particular for three people (my kids) who have a lot of photos for each person. On the Cork board there is only one entry per person, so this is not a multiple face entry there.
I was living with this for a while, but now I have my iPhone and can sync faces photos with it, I can see again there are multiple entries listed for these three people, yet there's nothing I can do in iPhoto to consolidate them.
Has anyone else come across this (like the person in the above thread - which didn't get answered) and found a solution to fix up iPhoto? Clearly it's something odd going on in the Faces database thinking there are different entries tagged, but is still showing them together in the Cork Board.

I would like to know how you got the multiple entries to appear. I'm having the same problem with my daughter. The only issue is, she is two and does not have any address book entries. I think I may have typed her name out several times when adding her name to a face instead of associating the photo with the existing entry. iPhoto recognizes they are the same places in some places, but not in others. I started a new post...
http://discussions.apple.com/thread.jspa?threadID=2319735&tstart=0

Imp: new session for the same user if idle for 4 mins. or else throw error

Dear All,
I have a requirement where for security reasons if a session remains idle for 4 mins. or more, it should redirect to login page. This is easy as there is a feature in apex itself under security in application properties. This works fine.
But I also don't want the users to start two active parallel sessions for the same user, and allow user to login only if the session for the user is idle for 4mins. or more or else display error message that the user has already logged.
A second in sequence, on submit process for this in page 101 when login button is hit is written for this. It is as follows:
declare
found boolean := false;
begin
for x in (SELECT a.apex_user from apex_workspace_activity_log a,apex_workspace_sessions b, (SELECT max(view_date) as maxdate FROM apex_workspace_activity_log where upper(apex_user)=upper(:P101_USERNAME) and APPLICATION_ID=120) maxresults, (SELECT max(session_created) as maxcreate FROM apex_workspace_sessions where upper(user_name)=upper(:P101_USERNAME)) maxsession where b.session_created=maxsession.maxcreate AND b.APEX_SESSION_ID!=:SESSION and upper(b.user_name)=upper(:P101_USERNAME) and b.APEX_SESSION_ID=a.APEX_SESSION_ID and a.seconds_ago<240 AND a.APPLICATION_ID=120 and a.view_date=maxresults.maxdate and rownum=1) loop
found:=true;
raise_application_error(-20000, 'Already Logged.');
exit;
end loop;
IF not found THEN
null;
END IF;
end;
But for some this reason this does not work as intended. Two users can login parallely.
When I trace the program, I see that it should catch the parallel user login. But it does not.
Is it some db cache issue? I don't know.
Kindly let me know how to fix this. It is crucial for us to achieve this.
Thanking in advance.
Regards,
Deepika.

Dear Fateh,
Thanks for the reply.
The features of this plugin are:
Configurable timeout actions including alert, redirect, and logout
Optional and configurable warning message
Option to keep session alive if user isn’t truly idle. Special thanks to Martin D’Souza for a great idea on how to implement this feature.
But it cannot stop a new session for a user, if there is an active (in my definition apex_workspace_activity_log.seconds_ago<240) session already running for that user.
Regards,
Deepika.

Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

Hi,
Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
Below are the 2 records the data from the table
select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
122:17056     122     17056     802     801
15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A
122:17056     122     17056     802     801
Thanks in advance,
-vijay

It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
Case -1 : When you delete the existing model and re-import again.
case 2:
When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
-Murali
Edited by: 907569 on Jan 8, 2013 10:55 AM

Multiple HighlightPainters for the same JEditorPane

Hey Everyone,
I'm having a problem having highligts of multiple colors for the same text component.
Basically I have a set of results in a separate panel for a search on the text in a JEditorPane. I want the text corresponding to all the search results to be highlighted one color as soon as the search is done, and when one specific search result is clicked on, have the highlight for that result's text change to a different color.
My current implementation is trying to do this by setting highlights for all the search results, and then when a result is clicked on, setting another highlight with another highlight painter of a different color. Unfortunately, this causes only the second higlight color to be displayed, even though when I look at the editorpane's highlights i can see all of them are being stored.
Is there something I'm misunderstanding about Highlights?
Thanks for any help,
Phil.

This example shows some ways of playing with attributes and highlights:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
public class TextPaneAttributes extends JFrame
 JTextPane textPane;
 JScrollPane scrollPane;
 Highlighter.HighlightPainter cyanPainter;
 Highlighter.HighlightPainter redPainter;
 public TextPaneAttributes()
 textPane = new JTextPane();
 textPane.setMargin( new Insets(20, 20, 20, 20) );
 StyledDocument doc = textPane.getStyledDocument();
 DefaultHighlighter highlighter = (DefaultHighlighter)textPane.getHighlighter();
 cyanPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.cyan );
 redPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.red );
 // Set alignment to be centered for all paragraphs
 MutableAttributeSet standard = new SimpleAttributeSet();
 StyleConstants.setAlignment(standard, StyleConstants.ALIGN_CENTER);
 doc.setParagraphAttributes(0, 0, standard, true);
 // Define a keyword attribute
 MutableAttributeSet keyWord = new SimpleAttributeSet();
 StyleConstants.setForeground(keyWord, Color.red);
 StyleConstants.setFontSize(keyWord, 24);
 StyleConstants.setStrikeThrough(keyWord, true);
 // Define superscript attribute
 MutableAttributeSet superscript = new SimpleAttributeSet();
 StyleConstants.setSuperscript(superscript, true);
 // Add initial text
 textPane.setText( "one\ntwo\nthree \nfour\nfive\nsix\nseven\neight\n" );
 // Change attributes on some keywords
 doc.setCharacterAttributes(0, 3, keyWord, false);
 doc.setCharacterAttributes(20, 4, keyWord, false);
 // Highlight some text
 try
 textPane.getHighlighter().addHighlight( 4, 7, cyanPainter );
 textPane.getHighlighter().addHighlight( 25, 28, cyanPainter );
 textPane.getHighlighter().addHighlight( 35, 40, cyanPainter );
 textPane.getHighlighter().addHighlight( 15, 20, redPainter );
 catch(BadLocationException ble) {}
 // Add some text
 try
 doc.insertString(0, "Start of text\n", null );
 doc.insertString(doc.getLength(), "End of text\n", keyWord );
 doc.insertString(doc.getLength(), "2", null );
 doc.insertString(doc.getLength(), "1", superscript );
 catch(Exception e) {}
 // Add text pane to frame
 scrollPane = new JScrollPane( textPane );
 scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
// scrollPane.setComponentOrientation(ComponentOrientation.RIGHT_TO_LEFT);
 getContentPane().add( scrollPane );
 // Create a Button panel
 JPanel buttons = new JPanel();
 getContentPane().add(buttons, BorderLayout.SOUTH);
 // Add a Bold button
 JButton bold = new JButton( new StyledEditorKit.BoldAction() );
 buttons.add( bold );
 // Add Right Alignment button
 JButton right = new JButton( new StyledEditorKit.AlignmentAction("Align Right", StyleConstants.ALIGN_RIGHT) );
 buttons.add( right );
 // Add Remove Highlight button
 JButton remove = new JButton("Remove Highlight");
 buttons.add( remove );
 remove.addActionListener( new ActionListener()
 public void actionPerformed(ActionEvent e)
 int offset = textPane.getSelectionStart();
 Highlighter.Highlight[] highlights = textPane.getHighlighter().getHighlights();
 for (int i = 0; i < highlights.length; i++)
 Highlighter.Highlight h = highlights;
 DefaultHighlighter.DefaultHighlightPainter thePainter =
 (DefaultHighlighter.DefaultHighlightPainter)h.getPainter();
 if (offset >= h.getStartOffset()
 && offset <= h.getEndOffset())
 textPane.getHighlighter().removeHighlight(h);
 public static void main(String[] args)
 TextPaneAttributes frame = new TextPaneAttributes();
 frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
 frame.pack();
 frame.setVisible(true);

How to avoid multiple session for the same username

Similar Messages

Maybe you are looking for