How to avoid permission prompt?

dear friends,
I created an addressbook application. i am using file to store details. on reading and writing data the application prompt Permission alert. i want to avoid this Permission prompt. If anyone know how to handle this plz guide me.
guna.

Hi sameer,
I have raised this issue before and also i have posted this issue to SAP.
till now i don't get any solution.
my issue is similar to this,
download without save dialog
Rgds,
Jothi.P

Similar Messages

How to avoid the prompt when verifing signature?

I sign the doc with my cert.
The cert is not trusted by Acrobat/Reader itself so when i try to verify the signature Acrobat/Reader will prompt the user cert is not trusted.
My question is how to avoid this prompt through Acrobat SDK or how to add my cert to trusted cert list through Acrobat SDK?
Thanks.

Patrick Leckey wrote:
You will also see the BER Decoding error when you have a self-signed peer-to-peer cert in your Windows Cert Store, even if it is not the signature you are using to sign.
Start > Run > certmgr.msc
Look for any certs that have "peer-to-peer" in the Intended Purpose column
Remove that cert
Restart Acrobat
Give that a shot.
Patrick,I have not found the Intended purpose of cert names "peer-to-peer".
But I have just found the cert which will cause the signature failure.
The key is the cert can not be removed.
I'm very curious that why a cert has no relationship with the signature could cause the signature failure?
Is it a BUG of Acrobat/Adobe Reader?
If not how can i operate successfully?
Thanks.

How to avoid password prompt in shell script for zip password protection

Hi
I am trying to set password protection to my oracle database export backup. Once the backup completed, it should compress with a password protection. Thats the plan. Initialy we were using the gzip for the compression. Then realized that there is no password protection for the gzip. Started using zip option. I tried using
zip -P <password> filename
But it was throwing below error.
-bash-3.2$ zip -P expreports REPORTS_2013FEB14.dmp
zip warning: missing end signature--probably not a zip file (did you
zip warning: remember to use binary mode when you transferred it?)
zip warning: (if you are trying to read a damaged archive try -F)
zip error: Zip file structure invalid (REPORTS_2013FEB14.dmp)
Not quite sure why.
Then I used zip -e REPORTS_2013FEB14.dmp.zip REPORTS_2013FEB14.dmp
But this prompting for the password. As I am trying to put the command in the script. It will be tough if it prompts for the password.
I would like to know how to avoid the password prompting by saving somewhere or how the code should be written. Tried using expect feature of shell script. Below was the code I tried. It didnt work.
[oracle@SF40V6636 test]$ cat repexp.sh
zip -e REPORTS_imp.log.zip REPORTS_imp.log
expect "Enter password:"
send "imprep"
expect "Verify password:"
send "imprep"
So please help in avoiding this password prompt or let me know how to change the code.
Thanks
SHIYAS M

How about using gpg and adding a secret key to the requirement of a password? No one should be able to decrypt your file, not by knowing only the password.
1. Generate a public and private key pair:
$ gpg --gen-key
When it shows "We need to generate a lot of random bytes…" open another terminal session and type "dd if=/dev/sda of=/dev/null" to create traffic. When the public and secret key created and signed you can Ctrl-C the dd command.
To see what you have created:
$ gpg --list-keys
2. Encrypt and gzip your stuff:
$ tar zcf stuff.tgz file_or_folder
$ gpg recipient "Some Name" encrypt stuff.tgz
$ rm -f stuff.tgz
3. Decrypt and extract the archive:
$ gpg batch yes --passphrase "password" -d stuff.tgz.gpg > stuff.tgz
$ tar zxvf stuff.tgz
Again, knowing the password alone will not let anybody decrypt your stuff.

How to avoid Priner prompt while calling smartform

Hi All,
I am calling smartform FM from my program. I am passing following settings in Output-Options and Control-Parameters:
wa_outputoptions-tddest = 'LP01'. "Printer name
wa_outputoptions-tdnewid = 'X'. "New request
wa_controlpara-device = 'PRINTER'. "Device
wa_controlpara-no_dialog = 'X'. "No dialog
Even after these settings I am getting prompt which asks printer name and other details.
Please tell me how I can avoid the prompt which asks printer name and other settings such as new spool request and print immediately.
Thanks in Advance.
Regards,
Vijay

hi,
try this....
DATA : control TYPE ssfctrlop.
control-no_dialog = ''.
control-preview = ''.
control-no_open = 'X'.
control-no_close = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
ARCHIVE_PARAMETERS =
USER_SETTINGS = 'X'
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJ =
OUTPUT_OPTIONS =
control_parameters = control
IMPORTING
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to avoid login prompt when viewing reports

Hello,
I am trying to access a report that I have put in the shared reports folder
I have copied the URL, see below, from the copy shortcut link.
However I am being prompted for a User name and password
http://server:port/OracleBAM/12345/reportserver/default.jsp?Event=viewReport&ReportDef=6&Buttons=False&ReportParameters=()
Can you please advise
a) If I can bypass or default a username and password in the URL
b) If the above is not achievable then do I need to set up each person, viewing the report, with a username and password and somehow pass these credentials in with the URL.
Thanks in advance,
Kevin

Hi Kevin,
I am sure its too late to post a reply for this question but it will be useful for others.
Yes, you can bypass the login prompt by implementing SSO to the BAM with a default username/password.
You can write a simple java code to simulate the process of submitting a login form, thus allowing users to access weblogic protected resources, like BAM report URL, without re-entering the username and password in the login page.
You can use HTTP client API to simulate Form Based HTTP Authentication. It will have to first post HTTP request to authenticate default user 'weblogic' and then from HTTP response get the cookie and pass it to the subsequent HTTP request (with the report URL) to access protected resource.
I had the same requirement and it worked for me :).
Thanks
Jahangir Pasha
Edited by: Jahangir Pasha on Mar 28, 2013 12:40 AM

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid lo-gin prompt while check in the document and saving doc while opening the document?

Hello
I might be missing something to configure or verify but many times I have faced below situation :
When I click on document in document library either its just opens or first save to disc and open.
When I check in a document , its asking for credentials but sometimes doesn't
Can anyone please describe the reason behind above behaviors ? how to avoid saving doc while opening and lo-gin prompt while check in the document?
Thanks and Regards,
Dipti Chhatrapati

It the sharepoint site accessed through firewall
http://support.microsoft.com/kb/2756625
You can try adding below registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters\AuthForwardServerListAdd the site to Trusted Sites Zone instead of Intranet Go to Control Panel >> User Accounts >> Manage Your Credentials and remove any credentials storedMake sure your office and IE Is same build (64 or 32)http://www.techrepublic.com/blog/smb-technologist/prevent-unwanted-credentials-prompts-with-sharepoint-document-libraries/ checked that 'basic authentication' is unchecked under Central Administration -> Application Management -> Authentication
ProviderOr tryhttp://social.technet.microsoft.com/Forums/office/en-US/45feb132-c304-4521-8b79-42236a829aab/login-prompt-appearing-when-opening-office-documents?forum=sharepointadminlegacy
If this helped you resolve your issue, please mark it Answered

How to avoid printer name prompt while calling Smartform

Hi All,
I am calling smartform FM from my program. I am passing following settings in Output-Options and Control-Parameters:
wa_outputoptions-tddest = 'LP01'. "Printer name
wa_outputoptions-tdnewid = 'X'. "New request
wa_controlpara-device = 'PRINTER'. "Device
wa_controlpara-no_dialog = 'X'. "No dialog
Even after these settings I am getting prompt which asks printer name and other details.
Please tell me how I can avoid the prompt which asks printer name and other settings such as new spool request and print immediately.
Thanks in Advance.
Regards,
Vijay

Hi Vijay,
Try like this.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
 control_parameters = wa_controlpara
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
 output_options = wa_outputoptions
 user_settings = space
IMPORTING
DOCUMENT_OUTPUT_INFO =
 job_output_info = tab_otf_data
JOB_OUTPUT_OPTIONS =
TABLES
 it_tab = itab[]
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5
Regards,
SP.

How to avoid reset pagination prompt

All,
Sometimes when i call my IR it doesn't paginate automatically but shows the link "reset pagination" now is there a what to all the time have the pagination and avoid this prompt link? any help on this is appreciated....regards.

Hello,
To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer or saved by the user.
To clear settings in an interactive report in a link, use the string "CIR" in the Clear-Cache section of a URL. "CIR" removes all report settings except for select columns and sorting. This is equivalent to the end user removing all filters, control breaks, highlights, aggregates, computed columns, chart settings, and flashback settings on the target page.
http://docs.oracle.com/cd/E14373_01/appdev.32/e11838/app_comp.htm#BABDHIDJ
Try
window.showModalDialog("f?p=&APP_ID.:399:&SESSION.:POP:NO:RIR,CIR:P799_STATE_CODE...{code}
Regards,
Hari

How to avoid " is it ok to use airtime?" Prompt?

Hi,
I am using a simple socket connection in my application. Each time when application attempts to a connection Nokia 6620 device shows a prompt
" is it ok to use airtime?"
YES/NO
Since this is a non user interacting application, I need to avoid this prompt permanently.
Can someone suggest me if there is some application level API/ device specific seeting available to avoid this prompt?
Thanks,
Regards,
Shivendra.

The jar has to be signed, and you need to specify the
relevant permissions in the jad file. There are many
article around on doing this. You'll have to obtain
a code signing certificate from an authority that
already has a root certificate on the device.
VeriSign seems to be the best choice ($400US).
There is no other way to bypass MIDlet security.Hi, i am facing the same problem as to get rid the prompt, and you have mentioned there are many articles on doing this, can you please paste me some links? thks alot

LD_ASSUME_KERNEL does not work in recent distros. How to avoid?

LD_ASSUME_KERNEL=2.4.XX does not work in all recent distros.
$ export LD_ASSUME_KERNEL=2.4.20
$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object
EBS contains very old cmponents like MWA wich not compiled without this setting. How to avoid errors?

You can unset LD_ASSUME_KERNEL and EBS 11i (11.5.9 and 11.5.10) will work fine on 2.6.16 kernels (SLES-10 and RH 5.0).
The following instructions should get you going:
1) Setup the environment as you would for running Applications on RH 4 or SLES9
I.E. follow Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
2) Remove any LD_ASSUME_KERNEL references in O/S /etc/profile.d files
3) Comment out LD_ASSUME_KERNEL entries in $ORACLE_HOME/appsutil/bin/adgetlnxver.sh and $AD_TOP/bin/adgetlnxver.sh
if [ ${setflag}x = "x" -a $os = "Suse" ]; then
# LD_ASSUME_KERNEL="2.4.21"
# export LD_ASSUME_KERNEL
     os="Suse"
fi
if [ ${setflag}x = "x" -a $os = "RH" ]; then
# LD_ASSUME_KERNEL="2.4.19"
# export LD_ASSUME_KERNEL
     os = "RH"
fi
If doing a rapid install, the database startup will fail and rapidwiz will prompt to ignore or retry. At this point, edit $ORACLE_HOME/appsutil/bin/adgetlnxver.sh as shown above and click on retry. It will then run to the autoconfig step at the end and error out. Just hit cancel, edit $AD_TOP/bin/adgetlnxver.sh and run autoconfig.
On Suse, one needs compat-gdbm for libgdbm.so.2
rpm -Uhv compat-gdbm-1.8.0-7.i586.rpm
Preparing... ########################################### [100%]
1:compat-gdbm ########################################### [100%]
Also in /usr/lib run ln -s libdb.so.2 libdb.so.3
Ref:
Note:300807.1 for Suse
create symbolic link called libdb.so.2 pointing to libdb.so.3, as follows:
$ cd /usr/lib
$ ln -s libdb.so.3 libdb.so.2 (or install db1-1.85-85.1 which does the same)
Note:294043.1 for Red Hat
As per an internal Bug 4045349, this is an issue with O/S side installation of compat-db rpm.
libdb.so.3 gets installed when compat-db rpm is installed.
- The O/S installation CD would contain compat-db
e.g compat-db-4.1.25-6.i386.rpm ( may change as per your version ).
- Manually install the compat-db rpm
e..g "rpm -ivh compat-db-4.1.25-6.i386.rpm"
OR
Note:345172.1
A library is missing: libdb.so.2 is from gnome-libs-1.4.1.2.90-34.1.i386.
This error also occurs in SLES9, same cause, slightly different resolution. SLES9 comes with libdb.so.3 and libdb.so.4 but not libdb.so.2 - need to install db1-1.85-85.1 to get libdb.so.2.
4) In order to relink cplex library executables (MSC, MSO, MSR, MST, WIP, etc), edit $AD_TOP/bin/adrelinknew.sh and add the following LD option (-Wl,--noinhibit-exec) in the LINUX section:
LINUX)
LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
DEBUG_LDFLAGS='-g -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
exe_line='ELF .*executable'
SHRLIB_LD='gcc'
LD='gcc'
SHRLIB_LDFLAGS='-L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -shared'
if test -f "/etc/redhat-release"; then
     CPP_LIBS='/usr/lib/libstdc++-2-libc6.1-1-2.9.0.so'
elif test -f "/etc/SuSE-release"; then
     CPP_LIBS='/usr/lib/libstdc++.so.2.9'
else
CPP_LIBS=''
fi
CPP='g++'
CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
set CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
to CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -Wl,--noinhibit-exec'
After this chance, you can apply any MRP, ASCP patch and all executables will relink correctly. You can also use adadmin to relink all executables and it completes without error.
5) Discoverer 4.1.38.08 Follow Metalink Note 280598.1 Discoverer 4i On Linux: Required Patch and Configuration for Discoverer Server Stability to use JDK 1.3.1 and oadj. I updated the autoconfig template files with this change after applying 3895177. Discoverer viewer and plus standard BIS reports all open correctly on SLES-10

How to avoid the dialogue when converting from context menu

This is a follow-up to http://forums.adobe.com/message/2016146#443364 which was locked due to a bug.
i would like to know how i can avoid the 'save as' dialogue when using the context menu to convert a word file to pdf using windows XP/acrobat 8/word 2007.
so far, it always prompts me for the filename, which is annoying as it does not allow me to batch-convert several files and let the thing run its course.
the solution provided by Steve in the other thread does not work - even if the plugin from word does not propt for a filename, it still does when triggered from explorer/context menu.
so back to square one: how to avoid that dialogue when not opening word at all?
cheers, thanks for any help. michael

For a permanent change, START>PRINTERS>right click on Adobe PDF printer and select properties>General>Printing Preferences>Adobe PDF Settings. Under the settings tab, uncheck the box related to asking for a name. Pretty sure that is the location, but it may vary with version.

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to avoid Line Items(fields) in BAPI mapping.

Hi
Does any body help me for mapping between header and line items in BAPI..
my scenario is filerfcmail(wokflow)!
File is CSV based :
(ex: 001150,,1123,JERM,08122006,,,
,,,ANN,,01082006,
If you look at example csv file , there is some fields mixed with header and line items. But in RFC header can be 1 to 1 and line item should be 0 to Unbound.
Now my problem is if I sent above example csv file as source :
The payload coming like this(sxmb_moni) :
</HEADERDATA>
- <GLACCOUNTDATA>
- <item>
<COSTCENTER />
<PROFIT_CTR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>60000</ITEM_AMOUNT>
<COMP_CODE>001150</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>7320</COSTCENTER>
<PROFIT_CTR>7320</PROFIT_CTR>
<ALLOC_NMBR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>40000</ITEM_AMOUNT>
<COMP_CODE>001151</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>6010</COSTCENTER>
<PROFIT_CTR>6010</PROFIT_CTR>
<ALLOC_NMBR />
</item>
<item />
</GLACCOUNTDATA>
You can find there is one more item coming after headerdata with null values. It means map reading first line and one by one , if any field found in rows which belogs to GLAccount(Line item), then it writing one more item after headerdata with that fields only.
Remainig GLAccount data coming as per map after the item .
Can you tell me how to avoid extra line items.
Thanks,
Sankar

Yes, It exist..
I cross checked ..with out givig fileds and giving some fields...its writing another items in after headerdata tag.
hope you understand , what my problem..
See: GLACCOUNTDATA under subnode
item is 0 to unbound in BAPI side, because of this its reading all rows , and if find any field which belongs to GLAccount , then it writing another item tag after headerr data.
Thnaks,
Sankar

HT3228 Please let me know how to avoid receiving the spam into my email accounts on the iPad. It is very annoying! My server puts it in the spam folder...why do I get it on the iPad? Is it avoidable and how?

Please let me know how to avoid receiving the spam (from the spam folder on the server) into my email accounts on the iPad. It is very annoying!
My server puts it in a spam folder and I do not receive it in the Ms Outlook on my desk computer...why do I get it on the iPad? Is it avoidable and how?b

You actually cannot do anything to your ipad when its locked but look at pictures the time and date, you need to restore it, and if it dosent let you restore, good luck chuck Heres how to restore it: Okay, i only know the itunes way soz, lol. Try to connect your ipad to itunes, if it does let you then you should be able to select the device you have in the corner somewhere, once you do that you should see a screen that looks sort of like your ipads setting, you should have a button that says "Restore" click that and your ipad should be restored. If that dosent work you should try going to your regular office depot or something. Good Luck!

How to avoid permission prompt?

Similar Messages

Maybe you are looking for