How to avoide the control recipe creation step and control recipe complete

Hi
in process order procedure has configured in our syayrm ...like
orde creation,release,control recipe created at time orede release, then order conformation ,order inal conformation, control recipe comlete , order TECH., ...Like ths our order process configured..
here we not useing any control recipe functions ... and control recipr complte ...so how to remove this step from order process...pls could any one guide inthis issue.
Rgards
HGVD

Dear HGVD,
Assuming there is only one order type(process order type) is used in both the manufacturing plants,then create plant specific
production scheduling profile in CORY,for the plant 2000,assign the prod.schd.profile with the default order type and
do not include the check box for generate control recipe and save the data,but in the same CORY,assign the same order
type,with including the check box for generate control recipe.
Check by this way and revert back.
Regards
Mangalraj.S

Similar Messages

How to find the shipping point creation Date and time

Hi All,
Could you please help to solve this issue.
Some of the users created shipping point, Now I have to find out in which date and time the shipping points were created, is there any table to find. please help me.
Regards,
Muralikrishna

hi Murali,
first define and assign shipping point in enterprise sructure in define shipping point EC07 and assign in OVXC
goto OVL2 and assign the shipping points
The following are used for the shipping point determination:
1. Shipping conditions - Proposed from CMR. The entry in VOV8 for the sales document type if there overwrites the entry in the shipping conditions mainatined in the CMR.
2. Loading group - Proposed from the material master record.
3. Plant - proposed from CMIR - if not found then CMR - if not found then MMR.
But you should first define and assign the shipping point in the "enterprise structure" otherwise you will not be able to do the shipping point determination.
IMG - logistics execution - shipping - basic shipping functions - shipping point & goods receiving point determination - assign shipping points.
Shipping point definition:
IMG - enterprise structure - definition - logistics execution - define, copy, delete, check shipping point. You have to define the shipping point here for the particular plant.
Shipping point assignment:
IMG - enterprise structure - assignment - logistics execution - assign shipping point to plant. Here select your plant and assign the shipping point to the same.
hope this helps,
cheers,
Hema.

How to avoid the duplicate receipts in SAP and Barcode system

Hi Everyone
We are using SAP ECC 5.0.Our receving is done by bar code system and it updates the SAP system. We have two separate database systems one for Bar code systems and another for SAP. Sometimes while receiving RFID scanner shows material is not received or failed and we have to receive it manually in the SAP system. Sometimes barcode system might have received but it is displayig error message, material receipt failed and we enter manually in the SAP and it becomes duplicate and creating inventory problems. Is there anyway we can fix this problem like while receving manually in the SAP system it should alert or pop message like material already received. What change we need to do in the configuration side.
Your help is greatly appreciated.
thanks in advance
Murali

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to run the BAPI after creation or Modification ?

HI Abapers,
How to run the BAPI after creation or Modification ? What is the step by step procedure to run the the BAPI?
Immediate reply is highely appriciable.
Regards,
Chow.

Hi
If you have done with BAPI creation correctly Run it similar to the fun mdule which we run in SE37 calling this BAPi in the program with CALL FUNCTION and passing the necessary parameters
see the sample bapi code how it is called in Program
data : w_resb_header like bapirkpfc.
data: begin of itab_resb occurs 0.
include structure bapiresbc.
data: end of itab_resb.
data: begin of itab_bapi_return occurs 0.
include structure bapireturn.
data: end of itab_bapi_return.
data : w_resb_no like bapirkpfc-res_no.
w_resb_header-plant = p_werks.
w_resb_header-res_date = sy-datum.
w_resb_header-created_by = sy-uname.
w_resb_header-cost_ctr = '0000010001'.
w_resb_header-move_type = '201'.
w_resb_header-gr_rcpt = w_room_time.
w_resb_header-part_acct = 'OR'.
*ITEM DATA
loop at i_details.
itab_resb-material = i_details-matnr.
itab_resb-plant = i_details-werks.
itab_resb-store_loc = i_details-lgort.
itab_resb-quantity = i_details-qty.
itab_resb-unit = i_details-meins.
append itab_resb.
clear itab_resb.
clear i_details.
endloop.
call function 'BAPI_RESERVATION_CREATE'
exporting
reservation_header = w_resb_header
NO_COMMIT =
MOVEMENT_AUTO =
importing
reservation = w_resb_no
tables
reservation_items = itab_resb
return = itab_bapi_return
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN = .
wait up to 5 seconds.
w_resb_no contains your reservations numnber
Regards
Anji

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to avoid the pdf file in browser cache

i am opening pdf files through browser. After that same pdf changed their contents . after i open the pdf but it will not updated. Bcoz this file in cache . so how to avoid the cache store for pdf files.
plz help me!!!

the code is as bellow
File fBlob = new File ("test.pdf");
FileInputStream fIS = new FileInputStream(fBlob);
pstUpdate= con.prepareStatement("UPDATE table set file = ? where id = ?");
pstUpdate.setBinaryStream(1, fIS, (int) fBlob.length());
pstUpdate.setString(2, rs.getString("id"));
pstUpdate.execute();
con.commit();

How often does the m7 take a steps measurement?

I have an iPhone 5s. I checked my steps in the health app and if I am to believe what I saw, the m7 takes 5 or 6 measurements per minute (that part I believe) and the hard part is that I took 200 or so steps in 1 minute. How often is the iPhone taking a steps measurement? It's not like I was running. I was in the grocery store, I think.

Hi Kumar,
I wasn't sure if it is done dynamically whenever there are changes or if there were timers that it uses to conduct it's table refresh rates and are those timers adjustable? The documentation on the Cisco site is very vague when it comes to CEF tables on IOS's 15.1 and above. Any good links you have on how it does it's updating would be very helpful to me - thanks!

How to avoid the screen of selection output device

Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.

Hi,
      data: wa_SSFCTRLOP type SSFCTRLOP.
       wa_SSFCTRLOP-DEVICE = 'PRINTER'.
       wa_SSFCTRLOP-NO_DIALOG = 'X'.
       wa_SSFCTRLOP-PREVIEW = 'X'.
    in the function module
   call function '....
   exporting
   CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

HT201238 How to downgrade the storage capacity? step by step please:-)

How to downgrade the storage capacity? step by step please:-)

Is this document detailed enough?
See: iCloud storage upgrades and downgrades - Apple Support
Scroll down to "Downgrade your iCloud storage plan"

How to avoid the Blank elemts in the List Item

Dear All,
I am using a List Item
List Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.
Thanks and Regards,
Fazil

Fazil,
I am using a List ItemList Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.>
Maybe you actually have null entries in your list. You can clean it up using keys as discussed here http://paranoid-engineering.blogspot.in/2008/05/wonderland-of-oracle-forms-builder.html (Ignore the personal opinions of the author if you will ;) ).
Cheers,

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

How to avoide the control recipe creation step and control recipe complete

Similar Messages

Maybe you are looking for