How to block internet connection for a period of time?

Hey guys is there a way to block internet connection via a lan connection for a period of time? A program that when my pc is boot up it run secretly and at the time schedule it block the internet connection with no pop up. When i not at home some person
used my pc to use my internet connection everyday. I can't lock up my pc since my brother or my dad used it.

Hi,
You could create a schedule task to achieve this.
The detailed solution please refer to this thread:
https://social.technet.microsoft.com/Forums/en-US/7544cbed-507d-4eef-907d-bafb99b45411/disable-internet-for-a-set-period-of-time?forum=w7itprogeneral
Karen Hu
TechNet Community Support

Similar Messages

How to block internet access for RDS and RemoteApp users?

Hi everyone,
This question might partially belong to security forum but I think anyone using RDS services comes across this. I would like to TOTALLY block all internet access including "updates" to any software, windows updates, anti-virus updates, TCP, UDP,
or ANY other protocol out of the server. I would like to only allow traffic both ways for established traffic (e.g. accessing the remote apps).
How can I achieve this without involving a third party firewall software?
Thanks

In our visitor center, we setup a computer with fake proxy server and add our website to the exception so that the visitors access our website only and no other website. If this RDS is for internal use only, you may disable default gateway. This link may
give you more options.
how to
restrict internet access
How to restrict Internet Access. You may have many options to disable a user or
computer to access the Internet. Some options can be adopted for many users
www.chicagotech.net/Internet/restrictie0.htm
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

No of RFC connections for a period of time

Dear all,
Is there any possibility to find the number of RFC connections hit to a server over a certain period of time?
I could not find any more details using AL08 since it gives the cumulative users rather than specific user type.
Regards,
Kumar
Edited by: Anees Qureshy on Jun 16, 2010 1:43 PM

Ya i have checked under that location.
But It will give the total no of calls that have been made.So if we assume 20 calls made,then im sure it does not imply that 20 connections have been made.
We have enabled a max of 2000 connections at any time.
But the number it is showing is in lakhs..I guess that is no of cumulative rfc calls made.
I still wait for a suitable reply.

Blocking message notification for certain period of time

Hi,
          We have a situation that requires that we do not process any messages even though they are messages sitting in the queue during certain period. Is there any programming API (I guess JMX based) where in weblogic JMS server can be notified to not to send messages until the block is lifted.
          We are using weblogic 8.1 JMS implementation.
          Thanks
          Sushil

I have not done this blocking programmatically.
          But blocking is configurable on the console at JMS Connection Factories -> Flow Control tab -> Send timeout. This blocking policy is configurable on the console at JMS Server -> Thresholds & Quotas tab -> Blocking Send Policy. Default value is 10ms. Change it to required time limit.

How to build MDX query for two periods of time?

I have the following MDX:
SELECT NON EMPTY
[Measures].[Returns],
[Measures].[Returns]
ON COLUMNS,
NON EMPTY
([Employees].[Company].[Company].ALLMEMBERS )
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM
SELECT
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED)
) ON COLUMNS FROM [cbSales]
WHERE
IIF(
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED).Count = 1,
STRTOSET("[Exec Date].[Hierarchy].[Month Num].&[2014]&[1]", CONSTRAINED),
[Exec Date].[Hierarchy].currentmember
Both columns shows returned data for month 2014/01
I want to have data for the next month (2014/02) in the second column.
How can I change the query to achieve my goal.

Hi,
To achieve this you need to create another measure with the help of ParallelPeriod function. Check the following example;
WITH MEMBER [Measures].[Sales Amount Current] AS [Measures].[Sales Amount]
MEMBER [Measures].[Sales Amount Next] AS ([Measures].[Sales Amount], PARALLELPERIOD([Date].[Calendar].[Month],-1, [Date].[Calendar].CURRENTMEMBER)), format_string = "Currency"
MEMBER [Measures].[Current Month] AS [Date].[Calendar].CURRENTMEMBER.Member_Caption
MEMBER [Measures].[Next Month] AS PARALLELPERIOD([Date].[Calendar].[Month],-1, [Date].[Calendar].CURRENTMEMBER).Member_Caption
SELECT {[Measures].[Current Month], [Measures].[Sales Amount Current], [Measures].[Next Month], [Measures].[Sales Amount Next]} ON COLUMNS,
{[Product].[Category].[Category].MEMBERS} ON ROWS
FROM [Adventure Works]
WHERE [Date].[Calendar].[Month].&[2007]&[10]
For ParallelPeriod specify -1 for "Numeric Expression" to navigate forward of the date hierarchy.
Best regards,
Chandima
Thanks, nice answer

How to solve poor internet connection for iPad New due to bugs or glitch in ios6

I m using iPad New with ios6 version. Since the upgrade I m facing a very serious internet connection for my ipad. Its worthless to have ipad when there is no internet connection or having difficulty to get the connection. Can someone give me some advice even up to the stage if downgrading to the previous version which is known to be working very well.

First, presumably your WiFi network is connected to the Internet right? However, even if so, you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPad (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

How to get internet connection from Airport Express to a PC?

I recently bought an Airport Express to get internet connection from my new MAC COMPUTER TO ANOTHER PC which is located in another room. For unknown reason, I could not get the other PC to work. Any idea how to fix it so that I can get internet connection for my PC? Many thanks for your expert assistance.

Currently, the Airport Express (not the Airport Express Extreme router) is acting as a base station via Ethernet to a cable modem.
I guess that it would be correct to assume that your new Mac can connect wirelessly to the AirPort Express base station, and access the Internet that way.
I am not sure if my 41/2 year old HP(Hewlect Packard) PC - (with AMD Athlon 64 3400 processor) which I am unable to get internet connection now is Wi-Fi capable.
You said "Prior to using the new Airport Express,I was using the Linksys wireless G router and have a wireless adapter sitting on top of my PC.". The wireless adapter would be Wi-Fi certified (they normally are). Is it a USB adapter? Please post back with the exact model.
Question: do I still need to use the adapter or not? Or the new Airport Express is enough to send internet signal to the PC?
A Wi-Fi adapter would act as a wireless network card for a PC, and should communicate wirelessly with an AirPort Express base station without a problem (providing that the chosen security/encryption is supported on both sides). Since the wireless adapter apparently was OK (with the Linksys router), you should be able to continue using it. Any other (built-in) wireless capability ought to be externally visible at the PC as a PCI card with an antenna.
Does the (Windows?) PC operating system detect any wireless networks? Is your AirPort Express on this list (even if you cannot connect or access the Internet)?
Jan

How to block internet to one of my machines

I have a very old windows 95 machine on my network. I am trying to figure out how to block internet usage to this machine but maintain the network. I use PC MacLan on that machine and it works fine. It is just that there is NO virus protection on this machine which means it is open all the time unless I unplug the ethernet cable.
Can anyone give me any suggestions? I have a router and dsl. Was hoping I could make some kind of setting in the OS pref panel.

Except I have to give that machine a fixed IP, correct?
Nope, DHCP will be fine, as long as the Router can prevent Internet for that one.
I think you can block Internet Access right on the PC too, by Not giving rights to use any Browser or eMail program, see if this helps...
http://forums.cnet.com/5208-6142_102-0.html?forumID=5&threadID=236440&messageID= 2418572

Sporadic Rotating Loss of Internet Connection for Just Some Devices

Hi,
We've been having a problem where one or two of our devices (phones, laptops, iPads, Apple TV) lose internet connection for 10-30 sec at a time, while the others are fine.
As best as I can tell it's a full loss of connection, not just something running very slowly due to us pushing the bandwidth limits. I've experienced the latter elsewhere and this manifests very differently. It will instantly and fully disconnect a person from an online game or drop a skype call without the accompanying prolonged lag or distortion of bottlenecked bandwidth.
It happens at all times of day, and does not seem related to our peak times of bandwidth usage, nor the general public's peak times of usage.
We should have enough bandwidh for our usage, and usually we do. Our system is 25/25 Mbps and during our peak use at most we would probably have 1 laptop gaming, 1 HD video stream, and 2 non-HD streams. However, like I said before, the problem seems unrelated to overall bandwidth usage. The same problem occurs even at midnight when our local usage is minimal.
Overall we have 6 laptops, 5 phones, an iPad, 2 microcell signal boosters, and Apple TV, in total connected to the FiOS. We have a property with tenants where the signal is distributed via 3 WiFi routers and one direct ethernet cable to my laptop, and one to the Apple TV.
It happens on devices that are both connected through the WiFi (wife's laptop, phones, iPad) and ethernet (my laptop, Apple TV). It can happen with devices that are a few unobstructed feet from the WiFi router. However, it anecdotely seems to happen more on our phones than laptops.
My hunch is it is something outside our local network. This is because our equipment and usage has basically remained unchanged over the last couple months. (We got one new microcell tower for a different carrier, one new wifi router, but overall same # of people and patterns of usage.) And yet the problem seems to be getting worse. Back in probably early November I don't remember this problem occuring at all.
My second best guess is there are more devices connected to the network than it can handle simultaneously, and it rotates which gets kicked off. Maybe this was occuring before but we didnt realize it.
My third guess is it has to due with signal interference with the various WiFi routers and microcell boosters. However, this seems less likely since it also affects devices connected via ethernet cables.
Any thoughts or advice is much appreciated! Thanks!
-Ned

Ok, so in the mean time we decided to upgrade our service so I've only tried this solution now.
My problem though now is I can log into 192.168.1.1, then give my verizon admin password, and then set my channel preference. That seems fine for changing the main network input and wifi router (call it A).
However, we have another wifi router (call it B) which is fed from A via a cable. I cannot figure out how to change B's wifi channel. Therefore I worry if we have only switched A, since A feeds B (as well as the 2 microcells) they will all still be on the same channel and therefore still interfering with each other.
I have tried www.routerlogin.net (and .com) as written on my netgear router and I get "http://searchassist.verizon.com/" telling me "Sorry, We could not find www.routerlogin.net". I have also tried logging into wifi router B via all the 192.168.1.X addresses I see listed on the Verzion account when I log in via 192.168.1.1 (in total I tried all the 192.168.1.[1-24] options).
Thanks for the help!

How to block a website (for all devices) on an EA6900

I'm trying to figure out how to block a website for all devices connected to my router. The only thing I can find is blocking websites by device. Please tell me that they did not take this feature away.

welcome to the 'smart' world. I think one of the best improvements Belkin could do is to give us back the option of the old gui. so much more useful.

Central Site Internet Connectivity for MPLS VPN User

What are the solutions of Central site Internet connectivity for a MPLS VPN user, and what is the best practice?

Hello,
Since you mentioned that Internet Access should be through a central site, it is clear that all customer sites (except the central) will somehow have a default (static/dynamic) to reach the central site via the normal VPN path for unknown destinations. Any firewall that might be needed, would be placed at the central site (at least). So, the issue is how the central site accesses the Internet.
Various methods exist to provide Internet Access to an MPLS VPN. I am not sure if any one of them is considered the best. Each method has its pros and cons, and since you have to balance various factors, those factors might conflict at some point. It is hard to get simplicity, optimal routing, maximum degree of security (no matter how you define "security"), reduced memory demands and cover any other special requirements (such as possibility for overlapping between customer addresses) from a single solution. Probably the most secure VPN is the one which is not open to the Internet. If you open it to the Internet, some holes also open inevitably.
One method is to create a separate Internet_Access VPN and have other VPNs create an extranet with that Internet_Access VPN. This method is said to be very secure (at least in terms of backbone exposure). However, if full routing is a requirement, the increased memory demands of this solution might lead you to prefer to keep the internet routing table in the Global Routing Table (GRT). You might have full routing in the GRT of PEs and Ps or in PEs only (second is probably better).
Some names for solutions that exist are: static default routing, dynamic default routing, separate BGP session between PE and CE (via separate interface, subinterface or tunnel), extranet with internet VRF (mentioned earlier), extranet with internet VRF + VRF-aware NAT.
The choice will depend on the requirements of your environment. I cannot possibly describe all methods here and I do not know of a public document that does. If you need an analysis of MPLS VPN security, you may want to take a look at Michael Behringer's great book with M.Morrow "MPLS VPN Security". Another book that describes solutions is "MPLS and VPN Architectures" by Ivan Pepelnjak. There is a Networkers session on MPLS VPNs that lists solutions. There is also a relevant document in CCO:
http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801445fb.shtml (covering static default routing option).
Kind Regards,
M.

How to block invoice posting for quality reasons

how to block invoice posting for quality reasons.For example while doing Goods receipt the material is posted to quality inspection stock. Then the material is rejected for some reasons. Once the decision is made then the standard system allows to post invoice. But I want to restrict invoice posting once the material is rejected for quality reasons.

posting of invoice is always allowed, the only thing you can restrict with customizing of QM in Procurement is the payment.
if you want to block invoice posting, then you have to control this in a user exit.

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

For OS X: Whenever I have internet access my disk is running continuously for a period of time without any activity on my part. When I close internet access the disk activity stops. Who is fishing for data?

For OS X v5 or 6: Whenever I have internet access my disk is running continuously for a period of time without any activity on my part. When I close internet access the disk activity stops. Who is fishing for data?

Thanks for your reply. I don't use itunes so that couldn't be it. Reading about Little Snitch and Hands Off, however, educated me about the data harvesting in many apps and that when buying from the AppStore one will more likely get Apps with benign data harvesting.

How to block internet connection for a period of time?

Similar Messages

Maybe you are looking for