How to solve poor internet connection for iPad New due to bugs or glitch in ios6

I m using iPad New with ios6 version. Since the upgrade I m facing a very serious internet connection for my ipad. Its worthless to have ipad when there is no internet connection or having difficulty to get the connection. Can someone give me some advice even up to the stage if downgrading to the previous version which is known to be working very well.

First, presumably your WiFi network is connected to the Internet right? However, even if so, you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPad (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Similar Messages

  • How can I share internet connection of iPad?

    Under the following considerations:
    - An iPad3 has established a 3G/4G data connection.
    - There is a wireless access-point working.
    - iPad is connected to that wireless access-point.
    - There is a notebook (or desktop whatever) also connected to same wireless network.
    ... is it possible to share iPad's internet connection across the network and how?
    Important note:
    I am not looking for iPad to perform like a wireless hot-spot. IMHO I am looking for a gateway/router application for iPad.

    You can't.
    If you don't want to use your local WiFi you could try using a mobile phone that allows you to create a personal hotspot.

  • How to setup dialup internet connection(PPP) in Solaris for ADSL modem

    I ,m new to Solaris. How to setup dialup internet connection(PPP) in Solaris for ethernet ADSL modem? will solaris recognise the ethernet modem?? I only have windows drivers for the ethernet modem. Where to look for info on this?

    The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
    Windows Control Panel > Internet Options > Connections or <br>
    Internet Explorer Tools menu > Internet Options > Connections
    "Dial whenever a network connection is not present"
    Source: [[How to make Firefox automatically dial up]]

  • My iPad loses internet connection for 5-10 seconds several times a day.

    My iPad loses internet connection for 5-10 seconds several times a day. I've had the iPad for 3 years without any problems.

    Settings > General > Reset > Reset Network Settings

  • Sporadic Rotating Loss of Internet Connection for Just Some Devices

    Hi,
    We've been having a problem where one or two of our devices (phones, laptops, iPads, Apple TV) lose internet connection for 10-30 sec at a time, while the others are fine.
    As best as I can tell it's a full loss of connection, not just something running very slowly due to us pushing the bandwidth limits. I've experienced the latter elsewhere and this manifests very differently. It will instantly and fully disconnect a person from an online game or drop a skype call without the accompanying prolonged lag or distortion of bottlenecked bandwidth.
    It happens at all times of day, and does not seem related to our peak times of bandwidth usage, nor the general public's peak times of usage.
    We should have enough bandwidh for our usage, and usually we do. Our system is 25/25 Mbps and during our peak use at most we would probably have 1 laptop gaming, 1 HD video stream, and 2 non-HD streams. However, like I said before, the problem seems unrelated to overall bandwidth usage. The same problem occurs even at midnight when our local usage is minimal.
    Overall we have 6 laptops, 5 phones, an iPad, 2 microcell signal boosters, and Apple TV, in total connected to the FiOS. We have a property with tenants where the signal is distributed via 3 WiFi routers and one direct ethernet cable to my laptop, and one to the Apple TV.
    It happens on devices that are both connected through the WiFi (wife's laptop, phones, iPad) and ethernet (my laptop, Apple TV). It can happen with devices that are a few unobstructed feet from the WiFi router. However, it anecdotely seems to happen more on our phones than laptops. 
    My hunch is it is something outside our local network. This is because our equipment  and usage has basically remained unchanged over the last couple months. (We got one new microcell tower for a different carrier, one new wifi router, but overall same # of people and patterns of usage.) And yet the problem seems to be getting worse. Back in probably early November I don't remember this problem occuring at all. 
    My second best guess is there are more devices connected to the network than it can handle simultaneously, and it rotates which gets kicked off. Maybe this was occuring before but we didnt realize it.
    My third guess is it has to due with signal interference with the various WiFi routers and microcell boosters. However, this seems less likely since it also affects devices connected via ethernet cables. 
    Any thoughts or advice is much appreciated! Thanks!
    -Ned

    Ok, so in the mean time we decided to upgrade our service so I've only tried this solution now. 
    My problem though now is I can log into 192.168.1.1, then give my verizon admin password, and then set my channel preference. That seems fine for changing the main network input and wifi router (call it A). 
    However, we have another wifi router (call it B) which is fed from A via a cable. I cannot figure out how to change B's wifi channel. Therefore I worry if we have only switched A, since A feeds B (as well as the 2 microcells) they will all still be on the same channel and therefore still interfering with each other. 
    I have tried www.routerlogin.net (and .com) as written on my netgear router and I get "http://searchassist.verizon.com/" telling me "Sorry, We could not find www.routerlogin.net". I have also tried logging into wifi router B via all the 192.168.1.X addresses I see listed on the Verzion account when I log in via 192.168.1.1 (in total I tried all the 192.168.1.[1-24] options).
    Thanks for the help!

  • Slingbox: setup problem "your Slingbox has been disconnected due to poor internet connection"

    Does anyone have experience in setting up a Slingbox with their Verizon router? If so, have you encountered this error ("your Slingbox has been disconnected due to poor internet connection")? How did you fix it?
    Thanks!!

    #1 Are you on
    a) DSL
    b) FIOS?
    #2 At least what the brand and model of your router is.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Poor internet connectivity through WRT160N

    I bought and installed a WRT160N v.3 router about 3 months ago and all was fine.  Recently, however, very poor internet connectivity has been experienced from my other 2 computers connected via wireless.  Last night I upgraded the firmware (actuallly Linksys tech) and it appeared at first to fix the problem.  Unfortunately, it didn't.  The same problem continues on both computers.  I have since done a hard reset and started from default parameters, but that didn't help either.
    This appears to be a common problem, but I haven't seen a complete fix.
    I have a Comcast cable internet connection and a speed test done on the hardwired computer gives the expected download/upload speeds (~20MBps and 8 MBps).  Through the wireless connection to the WRT160N is another story.  Speeds are less than 0.5MB!
    Any suggestions???

    Well, I think I solved my problem.  I had the router set-up with WEP encryption and was getting very poor internet connections on my wireless PCs.  After trying a miriad of fixes found on this site and others, I decided to go to a unprotected network set-up.  I was amazed to see my wireless connectivty jump to the expected speeds for my Comcast cable connection. 
    Has anyone heard of WEP causing a slowdown in connectivity?
    Guess I will try the other security set-ups to see if I can get fast connectivity and a secure network.

  • TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

    Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • Adobe Connect for iPad Error - User Limit

    I have loaded Adobe Connect for iPad on my iPad 3. We are using Connect 9 on-premises. I wanted to test how it works, so on my PC, I set up a Meeting and added a new user that I created in Users and Groups as an iPad Connect user. I started the meeting on my PC and pasted the URL for the meeting (after connecting through wireless and VPN). I was asked to login. So I used the Member selection and got the following error when I attempted to connect: "User Limit for this account has been exceeded". So I tried to back out and login as a Guest. I got so far as to have the request to be accepted to the meeting go to the host (me on my PC). I accepted the request, but then I got the same error message. Any ideas what I can do to resolve this.

    A folio can only either have all article in single orientation (portrait/landscape) or both. Check to make sure all article share the same oreitnation flow throughout

  • How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

    How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

    You can not connect to the internet with a WiFi only iPad without WiFi. You can get a mobile hot spot from your carrier but that still connects to the iPad via WiFi and comes with a monthly data plan like a cell phone.

  • What bluetooth devices may create a internet-brigde for iPad?

    What bluetooth devices may create an internet-bridge for iPad?
    Can't find information in tech specs.
    Is it Apple devices ONLY (iPhones, iPods ...) or it can be other devices like mobile phones or stuff?

    Have a look at this article:
    iOS: System requirements for Personal Hotspot
    Device requirements
    To connect to a Personal Hotspot, your device requires:
    Personal Hotspot using a Wi-Fi connection
    A device with Wi-Fi with support for WPA/WPA2 encryption.
    Personal Hotspot using a USB connection
    Mac running Mac OS X v10.5.8 or later or a PC running Windows XP Service Pack 3 or later, Windows Vista, or Windows 7.
    iTunes 9.2 or later downloaded and installed on your computer.
    Dock Connector to USB cable.
    Personal Hotspot using a Bluetooth connection
    Mac or PC with Bluetooth 2.0 capability and Mac OS X 10.4.11 or later, or Windows XP Service Pack 3 or later, Windows Vista, or Windows 7.
    iPad or iPod touch using iOS 4.3 or later can also connect using a Bluetooth connection. You cannot share a celluar connection using Bluetooth with other iPhone devices.

  • Central Site Internet Connectivity for MPLS VPN User

    What are the solutions of Central site Internet connectivity for a MPLS VPN user, and what is the best practice?

    Hello,
    Since you mentioned that Internet Access should be through a central site, it is clear that all customer sites (except the central) will somehow have a default (static/dynamic) to reach the central site via the normal VPN path for unknown destinations. Any firewall that might be needed, would be placed at the central site (at least). So, the issue is how the central site accesses the Internet.
    Various methods exist to provide Internet Access to an MPLS VPN. I am not sure if any one of them is considered the best. Each method has its pros and cons, and since you have to balance various factors, those factors might conflict at some point. It is hard to get simplicity, optimal routing, maximum degree of security (no matter how you define "security"), reduced memory demands and cover any other special requirements (such as possibility for overlapping between customer addresses) from a single solution. Probably the most secure VPN is the one which is not open to the Internet. If you open it to the Internet, some holes also open inevitably.
    One method is to create a separate Internet_Access VPN and have other VPNs create an extranet with that Internet_Access VPN. This method is said to be very secure (at least in terms of backbone exposure). However, if full routing is a requirement, the increased memory demands of this solution might lead you to prefer to keep the internet routing table in the Global Routing Table (GRT). You might have full routing in the GRT of PEs and Ps or in PEs only (second is probably better).
    Some names for solutions that exist are: static default routing, dynamic default routing, separate BGP session between PE and CE (via separate interface, subinterface or tunnel), extranet with internet VRF (mentioned earlier), extranet with internet VRF + VRF-aware NAT.
    The choice will depend on the requirements of your environment. I cannot possibly describe all methods here and I do not know of a public document that does. If you need an analysis of MPLS VPN security, you may want to take a look at Michael Behringer's great book with M.Morrow "MPLS VPN Security". Another book that describes solutions is "MPLS and VPN Architectures" by Ivan Pepelnjak. There is a Networkers session on MPLS VPNs that lists solutions. There is also a relevant document in CCO:
    http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801445fb.shtml (covering static default routing option).
    Kind Regards,
    M.

  • Avoided poor internet connection

    Just bought an Android phone and it doesn't connect to my WOW network wifi. Very shortly after saying it is connected, it comes back with the message: "Avoided poor internet connection." I do not have this problem with any of my other wifi connected devices: iPhones, iPad, Dell laptops, TVs, ...

    Do you have smart wifi enabled? It will use OTA data if it detects a weak wifi signal versus cellular service. Turning it off forces the use of wifi, no matter the signal strength.

  • How to share my internet connection on my macbook with my iPhone ?

    Hi guys, Do you know how to share my internet connection on my macbook with my iPhone. I have already made my own network, and I allowed sharing Internet , but it didn't work. Can you help me , please?

    If your carrier provides the service, go to Settings > General > Network > Personal Hotspot.  If you don't see the Personal Hotspot option, then your carrier does not support it.
    Note that you'll have to pay for a 'tethering' data plan on top of your normal iPhone data plan.

  • Itunes wi-fi sync; how do I add a name for my new computer on the ipad 4?

    RE: itunes wi-fi sync;
    How do I add a name for my new macbook pro computer on the ipad 4?

    You cannot add a name for Mac on the iPad. I assume that you mean in the WiFi sync setting - not possible.

Maybe you are looking for