How to bring data for newly aciated datasource in a Application componenet

Hi ,
i have 2 data sources(application component 11) are active in production system. and delta load is running for them.
Now we have a requirement that we need to activate the 3rd datasource in the same application component 11.
so, how to bring data for the newly acivated datasource. Do i delete the setup table data and again run statistical setup and run the init for the three data sources?
how to do?

Hi,
To bring the data for the new data source you need to delete the data from setup tables and need to fill up again. before filling up the tables, its better to load the delts for other 11 application components data.
Your deltas will come from delta queue, by deleting the setup tables, you will not impact your delta loads.
So just fill up setup tables and run your init package. it will extract the data.
Thanks
Srikanth

Similar Messages

How to fill data for asset accoutning datasources

hi gurus
i want to know how to fill data for the FI:asset accounting data sources.As these datasources are not related to Logistics,i think filling setuptables concept doesnot come into picture here.thenhoe to fill data for the datasources:0FI_AA_001,0FI_AA_005,0FI_AA_006
Pls give me some inputs ASAP
Its very Urgent
Thanks in Advance
Surya Reddy

Hi,
Asset Accounting works with Timestamp mechanism. No Setup table concept like logistics. Find the prerequisites for AA extraction.
For Asset Accounting Delta Extraction you first need to have this BADI - FIAA_BW_DELTA_UPDATE active in the system:
Check the link below for more details about the badi and the delta extraction procedure.
http://help.sap.com/saphelp_nw04/helpdata/en/a8/f4153c4eb5d82ce10000000a114084/frameset.htm
Sequence of Data Requests
For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to Info Cubes, master data must already exist prior to extraction of transaction data.
Also the following sequence must therefore be kept to during extraction:
1. 0FI_GL_4 General Ledger: line items (if required)
2. 0ASSET_ATTR_TEXT Asset sub number (flexible updating)
3. 0ASSET_AFAB Depreciation area real or derived
Then the transaction data
0FI_AA_11 FIAA: transactions and / or
0FI_AA_12 Posted depreciations (period values)
Hope it helps
Regards
Srikanth

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

HT4623 how to recover data for contacts on iPad mini

how to recover data for contacts on ipad mini?

You don't give much info to go on. Do you sync your contacts?

IDOC: How to fill data for sub segments ?

Hi,
I have 3 segments, segA , segB , segA1 . segA1's parent segment is segA . segA and segB are at the same level .
How to fill data for segA1 ? can you give some sample code ?
Thanks a lot !

hi,
You can fill the segment in the sequence in the idoc either parent or child.
In you case first fill parent segment SEGA next SEGA1. Then you can fill the SEGB.(If segB is deifned as next segment of segA in the idoc structre)
Thanks and regards,
shyla kumar

How to fetch data for sales order costing

Hi All,
How to fetch data for VA03 --> Extras --> Costing having cost element details.
Thanks
Gaurav

Hi Gaurao ,
There is no such function module to extract data in one column , you have to Convert all the columns data in one column
for period .
regards
Deepak.

How should restrict data for particular month?

Hi Experts,
How should retrieve data for particular month without where condition.

Hi,
You must be having Month Object right in your Webi?
User will be given opportunity to Select his/her required [Month]
Create variable as =Userresponse("Enter value for Month")same text as you are giving in the Prompt text....Name it as [UMonth]
Go to analysis tab..Filter..Add filter...[Month]=[UMonth]
always this report will run for the month user require

How to extract data from Internet explorer & active MS office applications?

Hi all,
Need advice on "How to extract data from Internet explorer & active MS office applications"?
Thanks in advance
regards
DIlip

If ths search list isn't what you want, just search again:
http://www.google.com/search?q=get+excel+data+in+java

How to get data for custom feilds for standard datasource

i have extracted CRM standard datasource 0CRM_OPPT_I.
In RSA6 i slected feilds which i want to trnasfer to B Iand i also added some custom feilds.
and then i went to RSA5 and i activated datasource.then i went to RSA3and i extracted.
In rSA3 selection screen all the custom feilds are selcted.
after extraction if i go to LIST,only some of the custom feilds data is displaying remaining feilds displayed as blank data
please tel me how to get data
Thanks in advance
HP

Hi Hari,
Sorry for late reply.
Once you have done the proper mapping by using the transaction BWA1
you need to write the BADI code which can be accesible from the following path:
Go to transaction SPRO
SAP Implementation guide ->Integration with other mySAP components ->Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM) ->
Settings for BW adapter->Execute Badi :BW adapter :Enhancement of datasources in messaging flow.
Select you the datasource enhancement implementation it will open the BADI Implementation..
go To interface tab and double click on the method..it takes you to the ABAP screen where you need to write the logic to populate the custom fields..
Please feel free to mail back if you have any quries.
All the Best..
Thanks
SK

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

Not getting correct data for newly added field in 0FI_AR_4

Hi to all,
I have added SPART field from VBRK table into 0FI_AR_4 datasource .
Based on join BSID-VBELN = VBRK-VBELN to get SPART from VBRK table.
but i found that some VBELN are not maintained in VBRK table, But are Present in BSID table, so i am not get SPART for which no
VBELN maintained in VBRK.
Please can any one tell me, what condition should i take to get SPART from VBRK to 0FI_AR_4.
as i knew that only BSID-VBELN = VBRK-VBELN sufficent to get data for SPART.
or any different condition i required.
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks for reply,
i have written code for that like that.
SELECT SINGLE * FROM VBRK
WHERE VBELN = <fs_d>-VBELN .
if sy-subrc = 0.
<FS_D>-SPART = VBRK-SPART.
endif.
ENDLOOP.
according to it result are not capturing all SPART from VBRK. as it only matches the VBELN which are same in both VBRK and BSID table.
so how to get SPART from VBRK if same VBELN is not maintained in both tables.
Please can you tell me CODE for that.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Feb 1, 2011 4:53 AM

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

How to see data for particular date from a alert log file

Hi Experts,
I would like to know how can i see data for a particular date from alert_db.log in unix environment. I'm suing 0racle 9i in unix
Right now i'm using tail -500 alert_db.log>alert.txt then view the whole thing. But is there any easier way to see for a partiicular date or time
Thanks
Shaan

Hi Jaffar,
Here i have to pass exactly date and time, is there any way to see records for let say Nov 23 2007. because when i used this
tail -500 alert_sid.log | grep " Nov 23 2007" > alert_date.txt
It's not working. Here is the sample log file
Mon Nov 26 21:42:43 2007
Thread 1 advanced to log sequence 138
Current log# 3 seq# 138 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Mon Nov 26 21:42:43 2007
ARCH: Evaluating archive log 1 thread 1 sequence 137
Mon Nov 26 21:42:43 2007
ARC1: Evaluating archive log 1 thread 1 sequence 137
ARC1: Unable to archive log 1 thread 1 sequence 137
Log actively being archived by another process
Mon Nov 26 21:42:43 2007
ARCH: Beginning to archive log 1 thread 1 sequence 137
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_137
.dbf'
ARCH: Completed archiving log 1 thread 1 sequence 137
Mon Nov 26 21:42:44 2007
Thread 1 advanced to log sequence 139
Current log# 2 seq# 139 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Mon Nov 26 21:42:44 2007
ARC0: Evaluating archive log 3 thread 1 sequence 138
ARC0: Beginning to archive log 3 thread 1 sequence 138
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_138
.dbf'
Mon Nov 26 21:42:44 2007
ARCH: Evaluating archive log 3 thread 1 sequence 138
ARCH: Unable to archive log 3 thread 1 sequence 138
Log actively being archived by another process
Mon Nov 26 21:42:45 2007
ARC0: Completed archiving log 3 thread 1 sequence 138
Mon Nov 26 21:45:12 2007
Starting control autobackup
Mon Nov 26 21:45:56 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0033'
handle 'c-2861328927-20071126-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Tue Nov 27 21:23:50 2007
Starting control autobackup
Tue Nov 27 21:30:49 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071127-00'
Tue Nov 27 21:30:57 2007
ARC1: Evaluating archive log 2 thread 1 sequence 139
ARC1: Beginning to archive log 2 thread 1 sequence 139
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_139
.dbf'
Tue Nov 27 21:30:57 2007
Thread 1 advanced to log sequence 140
Current log# 1 seq# 140 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Tue Nov 27 21:30:57 2007
ARCH: Evaluating archive log 2 thread 1 sequence 139
ARCH: Unable to archive log 2 thread 1 sequence 139
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARC1: Completed archiving log 2 thread 1 sequence 139
Tue Nov 27 21:30:58 2007
Thread 1 advanced to log sequence 141
Current log# 3 seq# 141 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Tue Nov 27 21:30:58 2007
ARCH: Evaluating archive log 1 thread 1 sequence 140
ARCH: Beginning to archive log 1 thread 1 sequence 140
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_140
.dbf'
Tue Nov 27 21:30:58 2007
ARC1: Evaluating archive log 1 thread 1 sequence 140
ARC1: Unable to archive log 1 thread 1 sequence 140
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARCH: Completed archiving log 1 thread 1 sequence 140
Tue Nov 27 21:33:16 2007
Starting control autobackup
Tue Nov 27 21:34:29 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0205'
handle 'c-2861328927-20071127-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Wed Nov 28 21:43:31 2007
Starting control autobackup
Wed Nov 28 21:43:59 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-00'
Wed Nov 28 21:44:08 2007
Thread 1 advanced to log sequence 142
Current log# 2 seq# 142 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Wed Nov 28 21:44:08 2007
ARCH: Evaluating archive log 3 thread 1 sequence 141
ARCH: Beginning to archive log 3 thread 1 sequence 141
Wed Nov 28 21:44:08 2007
ARC1: Evaluating archive log 3 thread 1 sequence 141
ARC1: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_141
.dbf'
Wed Nov 28 21:44:08 2007
ARC0: Evaluating archive log 3 thread 1 sequence 141
ARC0: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
ARCH: Completed archiving log 3 thread 1 sequence 141
Wed Nov 28 21:44:09 2007
Thread 1 advanced to log sequence 143
Current log# 1 seq# 143 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Wed Nov 28 21:44:09 2007
ARCH: Evaluating archive log 2 thread 1 sequence 142
ARCH: Beginning to archive log 2 thread 1 sequence 142
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_142
.dbf'
Wed Nov 28 21:44:09 2007
ARC0: Evaluating archive log 2 thread 1 sequence 142
ARC0: Unable to archive log 2 thread 1 sequence 142
Log actively being archived by another process
Wed Nov 28 21:44:09 2007
ARCH: Completed archiving log 2 thread 1 sequence 142
Wed Nov 28 21:44:36 2007
Starting control autobackup
Wed Nov 28 21:45:00 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Thu Nov 29 21:36:44 2007
Starting control autobackup
Thu Nov 29 21:42:53 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0206'
handle 'c-2861328927-20071129-00'
Thu Nov 29 21:43:01 2007
Thread 1 advanced to log sequence 144
Current log# 3 seq# 144 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Thu Nov 29 21:43:01 2007
ARCH: Evaluating archive log 1 thread 1 sequence 143
ARCH: Beginning to archive log 1 thread 1 sequence 143
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_143
.dbf'
Thu Nov 29 21:43:01 2007
ARC1: Evaluating archive log 1 thread 1 sequence 143
ARC1: Unable to archive log 1 thread 1 sequence 143
Log actively being archived by another process
Thu Nov 29 21:43:02 2007
ARCH: Completed archiving log 1 thread 1 sequence 143
Thu Nov 29 21:43:03 2007
Thread 1 advanced to log sequence 145
Current log# 2 seq# 145 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Thu Nov 29 21:43:03 2007
ARCH: Evaluating archive log 3 thread 1 sequence 144
ARCH: Beginning to archive log 3 thread 1 sequence 144
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_144
.dbf'
Thu Nov 29 21:43:03 2007
ARC0: Evaluating archive log 3 thread 1 sequence 144
ARC0: Unable to archive log 3 thread 1 sequence 144
Log actively being archived by another process
Thu Nov 29 21:43:03 2007
ARCH: Completed archiving log 3 thread 1 sequence 144
Thu Nov 29 21:49:00 2007
Starting control autobackup
Thu Nov 29 21:50:14 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071129-01'
Thanks
Shaan

How to format data for a custom group

Hi all
I have a pivot table with Actual and Budget as columns and some accounts in the rows. Since I'm using the account hierarchical column, I created custom groups for the accounts using the Selection steps pane. For example, I created a new group called Profit to combine 3 different Profit accounts and display one Profit line.
Now I want to format the data for the Profit group. I right-click on the Profit group, choose to edit the group and click on the Format button on the bottom left corner. I add some formatting, e.g. borders. When I now view the pivot table, borders have been applied to the label of the group - so the word Profit is now bordered. However, the values in the Actual and Budget columns do not have a border. Don't know what I'm missing, but I want both the group label and the values to be formatted the same way.
How can I apply formatting to the data/values for the custom group?

Yeah tried that already, it formats the entire column whereas I need just the values for the Profit row to be formatted. Seems it is a limitation only when using custom groups?

How to extract data for particular two members of same dimension.

As per the requirement i need to export data for certain members of a dimension. Lets say we need data for two account members A and B which is in in Account dimension only but is not a direct children. I need the data for all the available years too. Please suggest me how my DATAEXPORT command should look like.
When i am using an AND statement it is not working accordingly. Say i am fixing for years 2007 and 2009 but the output file is coming for 2009 and 2010.
Something other is happening when i am fixing OPEX_31 and OPEX_32. The values are coming not only for OPEX_31 and OPEX_32 but for many more accounts too.
Here is my dataexport statement for your reference
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportColFormat ON;
DataExportDimHeader ON;
DataExportOverwriteFile ON;
FIX("LC","Total_Year","ESB1","2009","SIERRA","COSTCENTER_NA","CELLULAR_NA","OPEX_31",
"January","February","March","April","May","June","July","August","September","October","November","December");
DATAEXPORT "File" " " "D:\exports\feb.txt";
ENDFIX;
I need data for OPEX_31 and OPEX_32 for all the available years starting from 2001 to 2025.
Please suggest what are the modification needed to get the desired result.
Thanks in advance

Hi,
There a few different options you can use for fixing on the months, years..
e.g. FIX(January:December)
or FIX(@CHILDREN(YearTotal)) < depends what the parent of the months is
sames goes for years
FIX(2009:2025)
or
FIX(@CHILDREN(Year)
If your period dimension is dense you can always use that as the column header e.g. DataExportColHeader "Period" and then fix on the accounts you require.
Cheers
John
http://john-goodwin.blogspot.com/

How to bring data for newly aciated datasource in a Application componenet

Similar Messages

Maybe you are looking for