How to cancel a RFC transaction called thru JCO

Hi,
One of my customer developed one application which access RFC module through JCO connection.
The development tool is 'MiPlatform' which is local solution in Korea.
Normally the application works fine.
But in case the back-end processing takes time and the user want to cancel the processing, they did not make it properly and there come a problem.
So can anybody guide them how to do or which document they need to see to cancel backend processing properly which invoked through JCO?
Or what information do I need to provide additionally?

hi
good
go through this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c
thanks
mrutyun^

Similar Messages

How to cancel my purchase transaction?

I have did an app store purchase yesterday and I have $100 Apple card and I was planning to use the cards for this purchaes, but because my credit card is in my account and I don't wont to use it in this transaction which I won't. How can cancel this purchaes transaction from App Store?

You cannot cancel a purchase as such. All purchases are immediate, and per the terms of sale of the iTunes Store and Mac App Store final. You can contact iTunes support:
http://www.apple.com/support/itunes/contact/
and explain the situation. Perhaps they'll be willing to reverse the transaction and allow you to repurchase after you redeem the gift card. But if this is a small purchase, it may be more effort than it's worth, and of course there is no guarantee that they'll agree.
Regards.

How to run a particular transaction called

I want to run this transaction to post a closed period's material stock into PCA. I am using origin object 19 (for material stock). Would really like to know from where I can get the material document numbers to key into this t-code. Any help would be appreicated
Edited by: Rajesh Manohar on May 7, 2010 5:26 PM

Say, in the attached program, when the user selects Autoset, it inserts corresponding state (Autoset) and now if you want this state to run again and again, probbbly you can again insert Autoset state while executing Autoset state... ohhh its confusing... check the picture below (A picture is worth a thousand words):
1. Based on user selection, insert Autoset state.
2. Re-insert Autoset state again and again while executing Autoset state.
3. Now to come out of this loop, based on appropriate event generation, insert any other state AT FRONT (equivalent to Enqueue Element At Opposite End).
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Routing my weekend calls thru BT ??

Hi folks.
Due to such terrible dealings when trying to renew my BT contract i moved over to Sky for my Broadband & Unlimited calls but maintained BT Line Rental with Unlimited Weekend (free) so can have caller ID.
My question is, how can i route my weekend calls thru BT so as i can avoid being charged for caller ID ??
* Customers who do not make some chargeable calls with BT will be charged for BT Caller Display. Customers with other call providers can still benefit from BT Caller Display at no extra cost if the following calls are made. Customers who are billed monthly must make at least two chargeable calls with BT in that month, otherwise BT reserves the right to charge £2.70 a month for BT Caller Display. Customers who are billed every three months must make at least six chargeable calls within those three months, otherwise BT reserves the right to charge £8.10 a quarter."

You cannot make CHARGEABLE calls through BT if your call package is handled by Sky.
If you have 1 line and you pay BT ( the line rental) and you pay Sky for Broadband and Calls, but no Line rental, then all your calls are chargeable to your Sky account, taking into account any weekend/anytime unlimited package you have with Sky
I have just noticed that you say that Sky are handling your calls, yet you also say that you have a
BT Line Rental with Unlimited Weekend (free). I think that you have got that wrong.
You cannot have a 5 day weekday call package with Sky and a 2 day weekend call package with BT
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Cancelling a ksoap function call

Hi Friends,
Does anybody know how to cancel a ksoap function call?
Thanks.
Sudheer Palaparambil

it can't be cancelled once it has been placed,
but you can nullify its effect logically..

How bapi different from session and call transaction?

how bapi different from session and call transaction?
thanks in advance.

For one, Batch Data Communication (BDC) is older. Business Application Programming Interface (BAPI) came later, about 10 years ago (you can see this already from the name, which contains marketese like "business" ).
More important though, they are different technologies. With BDC you build the "batch input transaction" yourself, with an ABAP program which creates the "batch input session" ("Batch-Input-Mappe" in german). You then take that session, like an object, and "run" it on a system (most of the time, this is done on a local system by the administrators, after it has been tested for correctness).
With BAPI, a system (local or remote) exposes its interface to you through some kind of Remote Function Call (RFC). Practically, it tells you: "What do you want to do? Insert that data into Materials Management? Here is the function and the the parameters you have to use for each record". You only work with the Interface - the exposed function. How this function works does not have to interest you. You don't have sessions to "run", you fire your function calls filled with data, one after another and you're done.
BAPI can be run remotely. With BDC, you probably have to call the administrators of the remote system and send them the session you created for them to run. With BDC you go through the whole transaction in one BDC session, with BAPI you may need more than one "BAPI calls" to do this.
With BAPI you don't fill obcure field names with values, you just fill the parameters. You can use a BAPI from inside your ABAP program to let a "business object" do some clearly defined work for you, then you can continue with your code doing other things. You don't do this with BDC. With BDC you write a dedicated program that creates the "session", which is then executed separately.
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a
typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program. Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling.
It can also be used for real-time interfaces and custom error handling & logging features. Whereas in Batch Input Sessions, the ABAP
program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the
BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and
invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate
fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are
not available for all application areas.
Business Add-In (BADI) are a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.

How to create an RFC for MIGO transaction?

How to create an RFC for MIGO transaction?
I want my RFC to accept all details as accepted in MIGO transaction.
For the entered PO no, display the materials against it and allow user to enter the quantity for the same.
Then the user should be able to post the PO by executing the RFC.
Kindly revert asap.
Thanx in advance,
Bhakti

Put good movement header data in structure header
l_header-pstng_date = sy-datum.
l_header-doc_date = sy-datum.
l_header-ver_gr_gi_slip = space.
Assign goods movement code
l_wa_goodsmvt_code-gm_code = c_gm_code.
Add material, plant, and other line item details in
goods movement item table
l_wa_goodsmvt_item-material = l_wa_selected-matnr.
l_wa_goodsmvt_item-plant = l_wa_selected-werks.
l_wa_goodsmvt_item-stge_loc = l_wa_selected-lgort.
l_wa_goodsmvt_item-batch = l_wa_selected-charg.
l_wa_goodsmvt_item-move_type = l_wa_selected-mov_type.
l_wa_goodsmvt_item-entry_qnt = l_wa_selected-deviceid.
l_wa_goodsmvt_item-entry_uom = l_wa_selected-meins.
l_wa_goodsmvt_item-move_plant = l_wa_selected-zwerks.
l_wa_goodsmvt_item-move_stloc = l_wa_selected-zsloc.
l_wa_goodsmvt_item-move_batch = l_wa_selected-rec_batch.
l_wa_goodsmvt_item-serialno_auto_numberassignment = space.
APPEND l_wa_goodsmvt_item TO l_i_goodsmvt_item.
CLEAR l_wa_goodsmvt_item.
l_wa_serial_num-matdoc_itm = l_c_mat_doc_item.
l_wa_serial_num-serialno = l_wa_selected-sernr.
APPEND l_wa_serial_num TO l_i_serial_num.
CLEAR l_wa_serial_num.
To call BAPI BAPI_GOODSMVT_CREATE to transfer material of transfer
type one step
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = l_header
      goodsmvt_code         = l_wa_goodsmvt_code
    IMPORTING
      goodsmvt_headret      = l_goodsmvt_headret
    TABLES
      goodsmvt_item         = l_i_goodsmvt_item
      goodsmvt_serialnumber = l_i_serial_num
      return                = l_i_return.
cheers
Aveek

How to cancel an order if transaction not complete

How to cancel an order if transaction not complete

Presuming you're referring to a purchase from the iTunes Store, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
Regards.

How can i debug a rfc being called from sap

hello Gurus,
We made a RFC call from SAP r3 to sap grc nfe......we did not receive any data in sap grc .......we go to SM58 and there it gives
the message "Name or password is incorrect (repeat logon)u201D.
How can i find out where the data has stuck.
Please help.
BR
Honey

HI,
please have a look at the link below..
this may help u !!!
[Re: how can i debug a rfc being called from .net connector (NCO) v2.0?;
Best of Luck !!1
Regards
Ravi

Can not call RFC contains "call transaction" in webdynpro

We use Webdynpro to develope a UI that can create service orders in CRM
system. We create an RFC funciton "ZKLEE_CRM_ORDER_MODIFY" in CRM,which
contain a statement of "CALL TRANSACTION 'CRMD_BUS2000120' USING T_BDC
MODE 'N' MESSAGES INTO MESSTAB.".
But as we exacute the RFC from WEB,we got 3 error messages in the
output "MESSTAB":
1.MESSAGE ID = "DC",MESSAGE NUMBER = "006", MESSAGE = "Control
Framework: Fatal error - GUI cannot be reached".
2.MESSAGE ID = "SY",MESSAGE NUMBER = "002", MESSAGE = "Exception
condition CNTL_ERROR raised."
3.MESSAGE ID = "00",MESSAGE NUMBER = "359",and it is a terminate
message.
The problem is that we can use webdynpro to call RFCs that do not
contain "call transaction" freely. At first we suspect that it is our
RFC function's fault, but we tried it in ABAP enviroment,and it works
OK. We also tried to call this RFC in JSP through JCO,the same error
occurs.
Our system enviroment is CRM 4.0, J2EE 640, kernel 640 patch 109.

HI,
Thank you for your information.
Maybe you are right that BAPI/RFC can not contain "call transaction" statement. But two weeks ago, one of my colleagues tried to use "call transaction" in RFC through JCO in our R/3 enviroment(not in CRM),and he successed.
So I suspect the kernel release. The kernel of R/3 is 640,while CRM is 620(I said our CRM kernel release is 640 before,and it is a mistake.).I will confirm whether what my colleague said is right by myself, and will also told you the result.
Message was edited by: Vincent zklee

RFC or BAPI for fb03 transaction call

When you execute the fb03 transaction call in SAP GUI, you got a screen asking you to enter Document number, company code, Fiscal year.
I'm trying to create a web dynpro application that does the same as fb03.
Is there an RFC or BAPI that takes the same set of parameters and return same results.

Hi Adel,
Welcome to SDN.
Please try this FM/BAPI.
<b>FI_DOCUMENT_DISPLAY_RFC</b>
<b>BAPI_ACC_DOCUMENT_DISPLAY</b>.
Hope this will help.
Regards,
Ferry Lianto

How to increase RFC lookup calls

Hi gurus,
we are using RFC Lookup functionality in graphical mapping. We tried to send 60.000 messages every hour. But it takes ca. 30 minutes in SAP PI mapping environment. I checked the communication monitoring see that every seconds send RFC receiver communication channel 20 RFC calls to SAP.
In RFC Receiver channel i have been set the maximum connection to '30'. Shold i increase this parameter or is there another functionality?
My question is, it is possible to increase RFC lookup calls?
Kind Regards,
PM

have you seen below link:
http://sapxitutorials.blogspot.com/2011/04/graphical-rfc-lookup-and-how-you-can.html

How to cancel Invoice generated thru ERS

Hi all,
Please tell me how to cancel an invoice that is generated through ERS process.
This is very urgent. Please help me.
Ganesh.

Hi,
In the transaction to generate and the ers invoice (MRRL), you have to mark the posts that you want to erase and press "save" button.
I don't think you can do it through MR8M but you can try it.
Hope it helps.
Regards

How to cancel a Pending Material Transactions

Here is the issue :
A component was setup with supply_type = Assembly pull.
This was an error, we change this attribute to bulk.
But some discrete jobs were completed before the correction, and material transaction were generated.
Since we have no component stock, the WIP Component issue transactions are stuck in the Pending transactions.
How can I cancel these Pending Transaction ?

Hi,
According with Note:197384.1, from Metalink, I think you can delete these lines from the MTL_MATERIAL_TRANSACTIONS_TEMP table.
Regards,
Renato.

How to track error message when calling Transaction: va02

Hi all,
    As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
    Now I want to know:
   1. how to track the error messages
   2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

How to cancel a RFC transaction called thru JCO

Similar Messages

Maybe you are looking for