How to cancel messages in "Transfer to process engine" status

Hi All,
In our production env, few of the messages in SXMB_MONI are stuck with the flag "Transfer to Process Engine". I would like to know where I can find these message or how canI cancel these messages. I checked all the options in "SMB_MONI_BPE", but could not find my message.
I want to find that message and cancel it out as I don't want it to consume server resources.
Any help would be appreciated.

ANy how if you want to delete those BPM runtime instance you can do so by deleting the logical instance of the BPM instance
go to SXMB_MONI and click on PE which got stuck and it will take you PE engine go to list technical options and chose workflow log option and then chose delete logical instance option
/people/michal.krawczyk2/blog/2009/03/18/xipi-bpe-admin--logical-deletion-of-a-process-instance
Rajesh

Similar Messages

  • Transfer to Process Engine

    Hi,
    I could see some messages in 'Transfer to Process Engine' status. What does this means?
    Thanks and Regards
    Suma S

    Hi Suma,
    It means that it's in message status 029, which is an Intermediate status and should be handled
    for further processing.
    It also means that it's waiting for reorg. of BP and then you should fix this status.
    For more information about the steps to reorganize messages of BPE, consider the note:
    #1042379 - BPE-HT: Deleting messages that are no longe used
    Regards,
    Caio Cagnani

  • Interface failure with the error : Transfer to Process Engine

    Hello All,
    We are receiving 2 messages for one SiteMaster idoc triggerred from SAP ECC. Its a BPE scenario.
    1. We are not sure why we are getting 2 entries in SXMB_MONI.
    2. 1 of the message status shows Successful Flag but its queue id : XBQO$PE_WS95000004 is in failed state in SMQ2. We have tried Execute LUW and its not working, hence we have given Save  LUW and saved it SMQ3.
    3. The second entry shows the status as 'Transfer to Process Engine' with a proper queue id.
    Attached the screenshots. Kindly check. Thanks in advance.
    Regards,
    KarthiSP

    ANy how if you want to delete those BPM runtime instance you can do so by deleting the logical instance of the BPM instance
    go to SXMB_MONI and click on PE which got stuck and it will take you PE engine go to list technical options and chose workflow log option and then chose delete logical instance option
    /people/michal.krawczyk2/blog/2009/03/18/xipi-bpe-admin--logical-deletion-of-a-process-instance
    Rajesh

  • How to cancel the sales order - header and line status are in Entered Stage

    Dears,
    I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
    Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
    So it is not possible to book and cancel the lines.
    Kindly me to resolve this.

    926530 wrote:
    Boss,
    If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
    The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
    How to cancel the sales order - header and line status are in Entered Stage
    Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
    unless until you have some processing constraints in place...which is stopping you...
    HTH
    Mahendra

  • How to cancel messages in SXMB_MONI with status "No receive found"

    Dear All,
    I need to cancel message with error status as mentioned in captioned subject.
    Can you please guide me how to do it?
    Regards,
    Saras Jain

    One more thing to check.....confirm if there is any background job scheduled to cnacel the message once it goes into error....if it is cancelled in this manner...if so you wont be allowed to cancel the (already cancelled) message manually
    Regards,
    Abhishek.

  • Migration - how to cancel all shopping carts in process

    Hello people,
    we are migrating from EBP to SRM (another machine).
    During this migration the users can access the EBP to check their old shopping carts, but could not change them.
    I have create a role with BBPPU02  transaction only.
    When the user tries to change a shopping cart (on hold), they receive a message informing  they don´t have access to BBPPU03 transaction.  Thanks ok.
    My question is: is there a job to cancell all shopping carts in process? Those shopping carts on hold, or not authorized. I would like to set their status to something like "Cancelled". This way the user could not change anyway.
    Do you know?
    Thanks a lot!

    I decided to take off the profiles.

  • How to cancel downloading app in ipod touch that status is "waiting"??

    I've choose "update all" from app store. Because a slow connection, all app that i've update is still "waiting" till now. I want to cancel the process and I've tried to reboot but still does'nt work. So, how to cancel those "waiting" app???

    iOS 4.3.1 has features for deleting it before you started downloading. iOS 4.2 does not

  • How to stop message "planned for outbound processing"?

    We have two messages with status "planned for outbound processing". Because we want to quit them i want to know how to do this?!
    Can somebody help?! these messages seems to be stuck because of java-mapping!?
    br

    Hi,
    Check the Queue name in Sxmb_moni and as expert Aamir  mentioned go to Tcode - SMQ2 look for the Queue name and delete the message.
    Cheers
    Agasthuri Doss

  • How to cancel or finaly close a PO on status requires re-approval, closed.

    these PO have  changes and require re-approval, yet they are closed and only option available through tools, control "place on hold."  I want finally closed them or cancel and am not getting the option to anything.

    How does the ftpClient.get("fileName") work? Also, are you running everything in the EventDispatchThread? If your running everything in the EventDispatchThread then ftpClient.get() will need to finish before an event can be handled.
    If thats the case, you could use a SwingWorker to do the downloading so that the Event Thread is available to handle the cancel event.

  • Split message mapping to integration process

    Hi,
    I faced an error when trying to send a multiple message (after a message split) to an integration process and I would like to know the possibilities to resolve this issue.
    What I want to do (more details below) :
    1. Get an order list from a database
    2. Split the order list in multiple orders (via a multi-mapping)
    3. For each order, create a new integration process instance
    The error I got is:
    Messages in multi message format can be sent to one adapter engine only
    The solutions I thought of:
    - Creating a new integration process / Update the existing integration process in order to execute the message split in the process engine
    - Create a new service (or business system) as a receiver instead of the process that points back to another XI service and set-up the appropriate configuration between the second service and the existing integration process
    My question: is there another solution than the two above?
    Thanks in advance
    Here are the details of what I did:
    1. A JDBC request returns an order list like:
    <resultSet>
       <row>
          <order>[...order 1 details...]</order>
       </row>
       <row>
          <order>[...order 2 details...]</order>
       </row>
    </resultSet>
    2. During interface determination phase, a multi-mapping is executed to produce several orders:
    <order>[...order 1 details...]</order>
    <order>[...order 2 details...]</order>
    3. The target receiver is an integration process who take as initial document only one order ; so, having two orders as a result of the split, I would like XI to create two new instances of my integration process, each receiving exactly one order.
    And there's when the above error occured.

    Hi Alexis
    Creating a new integration process is suggested as your target receiver is your current integration process and along with this splitting and passing data to multiple receiver can be done in integration process.
    Thanks
    Mitesh

  • PI 7.1 RWB - find user cancelled message

    hi,
    simple question.
    Where can i find the username of a cancelled message in the RWB (adapter engine monitor) ?
    I can´t find the username in the audit log, message log or somewhere else.
    The audit log is only showing the entry: Admin action: The message was successfully set to status failed.
    I ´ve searched the nwa logs without success.
    any ideas ?

    Therefore please apply the patches recommended on the note below.
    > 1401840 - User name in Audit Log entries for administrative actions
    "Symptom
    When a user performs administrative actions on XI messages of the
    Adapter Engine, the user name is not included in the Audit Log entries.
    It's afterwards impossible to determine the user who canceled or retried
    an XI message."

  • How to check Message Holding Capcity

    Hi All,
    Can anybody help me How to check message Holding capacity in Adapter engine..?
    Thanks
    Dayakar

    HI,
    The Messages in adapter engine are based on the retention period mainatined.
    Go to Visual Admin > Server 0 > Services > SAP XI Adapter: XI
    On the right you would have two parameters:
    1) xiadapter.inbound.persistDuration.default
    2) xiadapter.outbound.persistDuration.default
    The values of these parameters are in milleseconds.
    Thanks
    Swarup

  • Process Chain Status is Red even though all processes are successful.

    I implement ABAP Code by using standard function module "RSPC_CHAIN_START" for execute process chain and return status of process chain after execute completely as following code:
    Execute Process Chain
    CALL FUNCTION 'RSPC_CHAIN_START'
      EXPORTING
        I_CHAIN             = I_CHAIN
        I_SYNCHRONOUS       = I_SYNCHRONOUS
    IMPORTING
       E_LOGID             = P_LOGID.
      If sy-subrc = 0.
        gt_status = 's'.
        WHILE gt_status = 's'.
    Get Status of Process Chain
          CALL FUNCTION 'RSPC_API_CHAIN_GET_STATUS'
          EXPORTING
          i_chain              = I_CHAIN
          i_logid              = P_LOGID
         IMPORTING
          E_STATUS             = gt_status
          E_MESSAGE            = P_MESSAGE.
    Status G or F - Report that the Chain is Successfully Completed.
    Status A - The chain is Currently running
    Status R or X - Report that the chain has ended with Errors.
        CASE gt_status.
        WHEN 'A'.
    Process chain is running
          gt_status = 's'.
          P_MESSAGE = ''.
        WHEN OTHERS.
    Process chain is completed
          exit.
        ENDCASE.
        IF gt_status = 's'.
           WAIT UP TO 2 SECONDS.
        ENDIF.
    ENDWHILE.
    Display Message
      IF gt_status = 'G' or gt_status = 'F'.
        MESSAGE i162(00) WITH P_MESSAGE.
      Else.
        MESSAGE e162(00) WITH P_MESSAGE.
      ENDIF.
      ENDIF.
    From above code, when execute this function module, sometimes status of process chain is shown as canceled 'X', therefore, output of this function module is shown as "The process chain is canceled". When monitor process chain in RSPC log view, the process chain status is also shown as canceled 'X' and status of all process in process is green, however, after wait for a while, the status changed from canceled 'X' to successful 'G'.
    Why did the status of process chain show as canceled 'X' even though finally process chain status is successful ? If I want to check status of process chain after execute completely, which status should to check in ABAP code?
    Regards,
    Pui

    Using that FM.. u will be providing the Instance and Variant of the failed process.. and hence the reload will start from the failed process but not the entire chain...
    In general the process status shud finish then or based on the link combination  the change from one process to other will happen...
    try to maintain a wait time between the process atleast 2 to 4 secs..
    thanks
    hope this helps..

  • Email notification for Process Chain Status

    Hi Experts
    Can any one suggest me how to setup Email Notification for the Process Chain status
    For eg If there is any error in the process chain is there any way that we get an Email notifications.
    Thanks

    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389689
    This can be perfectely done using Tcode ALRTCATDEF.
    1. go to ALRTCATDEF
    2. select classification "Process Chains"
    3. click on display/change
    4. double-click on "error in a process of a process chain"
    5. click on "fixed recipients"
    6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
    7. save
    8. go to your process chain (rspc)
    9. go into edit mode
    10. from the menu, select Process chain -> attributes -> alerting
    11. check "send alerts if errors occur".

  • How to Cancel Succesful Processed Messages

    Hi Experts,
    How to cancel the succesful processed messages which reached Integration Server and sender Adapter engine in XI.
    Thanks
    Venkat Anil

    We cannot cancel Successfully processed messages.
    However you can configure Archiving and/ or deletion of successfully processed messages to remove the entry from the DB
    Edited by: abhishek salvi on Jan 8, 2010 2:57 PM

Maybe you are looking for