PI 7.1 RWB - find user cancelled message

hi,
simple question.
Where can i find the username of a cancelled message in the RWB (adapter engine monitor) ?
I can´t find the username in the audit log, message log or somewhere else.
The audit log is only showing the entry: Admin action: The message was successfully set to status failed.
I ´ve searched the nwa logs without success.
any ideas ?

Therefore please apply the patches recommended on the note below.
> 1401840 - User name in Audit Log entries for administrative actions
"Symptom
When a user performs administrative actions on XI messages of the
Adapter Engine, the user name is not included in the Audit Log entries.
It's afterwards impossible to determine the user who canceled or retried
an XI message."

Similar Messages

  • USER Cancelled message while navigating report.

    Post Author: sreeraj_vinod
    CA Forum: General
    One of our clients are facing a peculiar problem. We have a VB 6 application with crystal report 9 reports assocaited to it. When the user generates a report which has a large amount of data, and he tries to navigate to the next page, he gets and message "User Cancelled". If it is sent to printer directly, it says "Error printing".  This report has 3 small sub reports embeded into it.
    Request you to let us know, what could be casing this issue.
    Thanks in advance.
    Sreeraj

    Post Author: ygregersen
    CA Forum: General
    It's possible that one of the items in your scenario has a time out limit. When it goes beyond that limit the error message defaults to a 'user canceled' message. This happens in Access all the time because the queries in there default to 60 seconds - your scenario seems to be a similar issue. Maybe look for something about a time out limit.

  • Finding user details,messages present and total space consumed

    Hi,
    i have to find
    - the total number of users present in the ims server,
    - the total number of messages present
    - the total amount of disk space consumed by all messages.
    when iam executing the command "mboxutil -a" on solaris iam getting all the user details, and at the end only iam getting the required details, and iam getting 2 more extra lines, saying errors, how to correct it.
    $ mboxutil -a
    SUMMARY:
    Number of users: 22
    quota Usage
    ----------+-------------------------------------
    diskquota | 10485760 17897(k)
    msgquota | 10000 16943
    mboxutil: cannot get user data from ldap, error = 32
    mboxutil: cannot get domain quota from ldap, error = 32
    Is there any best way to find out the details what i mensioned in the beging.
    in the above output what are the last two lines showing ldap error = 32. can any body help me pls in correcting the error.
    Biswa

    You will want to look at the access log from your ldap server, to find out what is giving the err=32. That means, "object class violation", and usually means you're looking something up that doesn't exist.
    You may have an invalid user in your ldap, looking at the access log could help figure that out.

  • Tracing canceled Messages in RWB

    Hi Experts,
    We have an option to trace userid of the manualy blocked or canceled messages in sxi_monitor. Is there any option to trace the userid of  a message in the RWB (i.e in Adapter Engine) which is canceled manualy?
    thanks for your help in advane.
    Thanks
    Sugata B Majumder

    We have an option to trace userid of the manualy blocked or canceled messages in sxi_monitor.
    Is there any option to trace the userid of a message in the RWB (i.e in Adapter Engine) which is
    canceled manualy?
    If userid of a message is the MessageID then:
    RWB --> Message Monitoring ---> Messages From Component (Select Adapter Engine) From (Database)
    You can now select the Time range for which you want to view the messages.....
    Then there is an option called Status.....in the dropdown of which you will get options like All Containing Error / SystemError / Application Error / Canceled With Errors.....if any option fits your requirement select it and hit the Start button...all the messages with the criteria will be displayed....select the message and click the Details button and you can see the relevant message details...
    Regards,
    Abhishek.

  • ME9F : no update  message 'NEU' when user cancel the printing

    I use transaction ME9F and when the user click on the button ‘Output message’, a specific program is called.
    A popup is displaying in order to display a choice for  the user. He can choose print ‘Original document’ or ‘Copy’ and he can also cancel the printing.
    But when he cancel the printing  the message ‘NEU’ is ‘OK’ (green cross) but the PO is not printed.
    Do you a solution for not changing the message ‘NEU’  when the user cancel the printing.
    Thanks for your help.
    Best regards.

    Hi ,
    u need to check ur driver program , if its standard SAP , then u need to change driver program.
    Regards
    Peram

  • User cancelled request error

    Have a feeling this has been discussed before, but couldn't find anything that worked. When I try to start a video chat with a friend, I get the message that the user cancelled the request, even thought it was accepted. Both of us were able to successfully connect to the apple test video chat. We have port forwarded all the ports Apple reccommended, but still no luck. Anyone have any suggestions?
    My setup: 12inch ibook G4 with 768 megs of RAM
    Router setup is tricky: Linksys WIRED router connected to cable modem. From there I have a Netgear WIRELESS router plugged into the Linksys. My ibook uses wireless most of the time.
    I can get video chat no problem when I connect directly to the modem. Couldn't connect with just one router on the network (either one). The wired linksys is older, so I thought it may have been that, but the newer wireless router didn't work either.
    Anyone know what the specific router settings are supposed to be? I have applecare for the ibook and they said they couldn't help since it was a router issue. I thought good customer service would be helping the customer get their product working, but apparently not. Any help is appreciated!

      Hello Meghan. First, I suggest you and your chat buddies who use Tiger should consider the suggestions from Help for iChat AV 3 Problems that are relevant to your system(s?) to see if they resolve your problem.
    If they do not, both of you should test with several other users to find which system is causing the problem. Otherwise, both of you will need to troubleshoot everything.
    If you need more Buddy Names for iChat Test, you can get some here. I keep no regular hours, but I (or the others listed there) will be happy to test with you whenever our status shows green ("Available") in your Buddy List.
    The problem system should then consider the suggestions in Using iSight with iChat AV.
    Among the suggestions there are tips on trouble shooting multiple devices as well as links to info about router configuration. Having tested with only one router in the loop, you have a good start on that, but you may need the additional suggestions, too.
    (You do not specifically say so, but I assume here that you are using iChat AV as your video chat app.) Use of multiple routers with iChat AV may require additional configuration settings. iChat AV can deal with only ONE device acting as a DHCP server. Therefore, I suggest that you only use one router if you can operate in that way.
    If you MUST use two routers for some reason, DHCP serving MUST be disabled (turned off) on one of the routers so only ONE of them is serving DHCP. The best way to do this is to enable "bridge mode" in one router. The instructions for doing this are in your router's users manual.
    If you are using multiple routers because you have several computers, game boxes, VOIP devices, etc., connected to your internet service, you should Check your Broadband Speed.
    Just FYI, I (and many other users) need NO port configuration of any kind to make iChat Video work. I have my Mac OS X software firewall enabled at all times and use a wireless router that is in current production. I make NO manual port configuration settings in either component.
    If you must make manual port configuration setting to make your system work, pay particular attention to the router suggestions from Ralph Johns that are linked in "Using iSight with iChat AV." Ralph also explains the error in Apple's Technical Article #93208. Carefully double check all settings and changes that you have made against Ralph's info. That should get you going if your problem is related to port configuration.

  • ABAP program to Cancel messages in Scheduled/Recorded status?

    Hi,
    Thanks for reading my post...
    Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
    Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC.  I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ).  {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
    Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status.  But I'm looking for an ABAP program to do this.  The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES.  However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
    Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this?  (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
    Many thanks for any help.
    Mark

    Messages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
    If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
    Thanks
    KK

  • "Submit Canceled" message appearing after clicking e-mail buttons

    On the forms I've been creating, a "Submit Canceled" message window has been appearing for users whenever they click the e-mail button on the form, although the functionality of the e-mail button works fine and does what it is supposed to do (opens the e-mail window with the proper addresses, subject, and text, no problem).
    Anyone know how to get rid of this "submit canceled" message?  A sample of one of my documents is here:
    https://acrobat.com/#d=40jQ4MZutn-BPLswgv37PA
    I'm using Acrobat 9.3, LS 8.2, and e-mail client is MS Outlook 2007.
    Thanks!

    Try this corrected file..
    https://acrobat.com/#d=NYCyBXSnCrbUHu*4PC2ApA
    I changed the control type of the button to Regular and moved the code to Click event.
    Thanks
    Srini

  • [CS3] [JS] User canceled

    I am doing my first steps trying to make the InDesignServer to create some pages. For some reason I sometimes get an error message: "User canceled this action."
    Obviously there is no user involved. And nothing is canceled. I cannot figure out what causes this problem.
    I trigger the server JS script from applescript passing some arguments. But I also had this error running the script directly from ExtendScript Toolkit 2.
    Anyone experienced something like this?
    Thank you,
    Ralf

    No Dave, that was the first thing I commented out when I prepared the script to run on InDesingServer. Also, the script does run sometimes (like 4 out of 5).
    Ralf

  • 700p suddenly gives invalid user/password message when trying to get new mail

    My Yahoo Mail Plus account is working fine. When I use versamail on the Palm Treo 700p to retrieve emails from my active Yahoo account, I get "-ERR(Auth)invalid user/password" message. I can access my Yahoo Mail account from the "Web" app on my treo.
    So it is definitely a VersaMail issue. This happened after it had been getting new mail (and sending) successfully.
    Can anyone help? 
    Post relates to: Treo 700p (Verizon)

    unfortunately Yahoo and their Branded contracts just don't work as advertised and neither the ISPs Nor Yahoo appear in the slightest bit interested.
    If you delete the popstate.dat file in the profile folder in the yahoo server directory, it will restart the download again from the top (Everything)
    You might also find that disabling email scanning in your anti virus program may be beneficial. (Could it be McAfee?)
    The majority of RETR complaints here are from ATT and BT users, both of whom get McAfee given in by their ISP.

  • V51VP - item was not found - process cancelled, Message no. HUGENERAL 056

    Dear Experts,
    When i am going to delete the handling units, its throws the error
    V51VP - item was not found - process cancelled
    Message no. HUGENERAL 056
    I am not able to delete the delivery, expecting the earliest solution,
    checked the same in SDN also, Not available,
    Expecting earliest reply,
    Thanks and Best Regards,
    Muralidharan S

    Thanks, user go head for billing without reverse the delivery

  • 820e errors in user and message databases

    Have started geting these pretty frequently on both user and message databases. I am finding them in the POA logfile. When this happens user sometimes gets an 820 error message and email closes. I run gwocheck structure check and fix nightly, and content check and fix on weekends. We have very large post office w around 100 users. Size of user db doesn't matter, it has happened on large users and smaller as well. Have tried doing structural rebuilds on user db, but these messages still come back again.
    Help please!
    mary

    Originally Posted by mspencer
    Have started geting these pretty frequently on both user and message databases. I am finding them in the POA logfile. When this happens user sometimes gets an 820 error message and email closes. I run gwocheck structure check and fix nightly, and content check and fix on weekends. We have very large post office w around 100 users. Size of user db doesn't matter, it has happened on large users and smaller as well. Have tried doing structural rebuilds on user db, but these messages still come back again.
    Help please!
    mary
    Hi Mary,
    What kind of server is GroupWise running on (hardware, OS version, physical/virtual, etc)?.... could be the lock errors are caused due to the server not being able to handle requests quickly enough.
    Also what's the GroupWise version running on the server?
    -Willem

  • GPO Deployement of Blackberry Desktop Software 6.1 fail with the following error: user cancelled installation

    Hello everybody,
    I get an issue when i try to deploy the latest version of Blackberry Desktop Software using a Group Policy Objetc.
    The package tries to install a the computer's startup but i can't find the product installed.
    On the event viewer and after a rsop.msc i get the following error: User cancelled installation
    I worked threw this link http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Unable-to-install-Blackberry-Desktop-... and i installed vcredist_x86 and msxml6 on the client computer but the problem is still the same.
    Could anyone help me for this issue.
    Over simple way to solve my problem would be to let me know where i can download an older version of Blackberry Desktop Software because there is a link on the website but it doesn't work.

    Well folks. I've had enough.
    The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
    I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
    Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
    Ciao folks!

  • Cancel message with errors - How to automate this?

    XI / PI SDN Community
    I think that because of basis team settings every time a message fails to pass through the pipeline (for example a mapping error) XI tries to process this message over and over again for days!
    Assuming that basis is not going to change any configuration on their end: Is therer a way to create a job (TCODE sm36) to do this cancel for me? - I mean I have access to go and manually cancel the message with errors tru the moni.
    Regards,
    José Francisco

    Dear Jose,
    Hi this is Tarang ...
    For cancelling messages on Java engine ( ones that you see on RWB )
    1. There is no standard program which would allow you to cancel the messages here
    2. you can only set a maxim retry interval...i.e how many times a meesage in error should be retried foe sending...this setting can be done in transaction sxmb_adm....there is a parameter called IS_RETRY for this..
    For cancelling the messages on ABAP engine ( ones that you see in MONI)
    1. You can cancel them using the report rsxmb_cancel_messages ...but  dont use this report independently...
        coz there are some chances ..due to which you are getting a message in error in moni ..but the message is restartable......then if you directly cancel it , it is not correct
    2. you cna club the above report with rsxmb_restart_messages...i.e you can create a job sequence where 1 step would be scheduling thee program rsxmb_restart_messages and then the ones that are not restarted properly ...yu can cancle using the second step in the sequence ....i.e rsxmb_cancel_messages
    But be it ABAP / JAVA engine every XI landscape has many of the EOIO interfaces where in the concept is that if the first message in the queue gets stuck ...the message behind that should also get stuck....if you cancel message automatically (say using the above report), there are chances that particular message was configured for EOIO and the message behind that is actuaaly not meant to move ahead..but once you cancel the first message3 the other will go.....which is wrong and against the laws of EOIO...
    hence SAP suggests " no automatic cancellation of message neither at ABAP nor at JAVA level should be done"
    SAP says that manual cancellation of messages is included in the daily maintenance task of XI
    you can obviously play with the number of retries using entry IS_retry
    Hope this helps
    Edited by: Tarang Shah on Mar 6, 2009 11:07 AM

  • User-friendly message to Microsoft Access form's user from Oracle server

    I put statment like this
    RAISE_APPLICATION_ERROR (-20001, 'You forgot to enter date') in before insert trigger, so I see in my access form this message, but also a lot of statments like:
    Insert failed,
    ORA-06512: at ....., line 11
    ORA-04088: error during execution of trigger ...
    Is there a possibility to leave only this user friendly message 'You forgot to enter date!', isn't it?
    I would be very fankfull! Please help

    Hi,
    >>so I see in my access form this message
    This a exception, You need find a way to capture this message from Microsoft Access.
    Cheers

Maybe you are looking for