How to catch SMPP gateway error type ?

Hi,
How can i catch different SMPP error type return by SMSC server ?
I want to catch result like 0x45,0x01,0x0B,0x58,0x15.... in my code. I can see eventgateway.log logging the error message but how do i get error type in my code ?
Thanks

Hi,
There are different approaches, you can use a validate activity or you can check the validate check box in an assign activity...
Have a look on the links bellow...
http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_appx_ref.htm#SOASE86011
http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_manipdoc.htm#SOASE1824
http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_manipdoc.htm#SOASE87095
Hope this helps...
Cheers,
Vlad

Similar Messages

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

How to catch the date error

Hi Experts,
                 i have two date picker in this if i type Wrong format automatically system show error "type the correct format", That means i will show the two error message.
But my requirement is i want to catch that error and i will give my own error message,please tell me its urgent
Regards,
Nutan
Edited by: nutan champia on Apr 23, 2008 9:20 AM

create a Error message in Message Pool
e.g: name - INV_DATE,
      Message: Invalid date {} // {} will take arguments
use this code where you want to display/check exception and rename attributes and context variables in the code
IWDNodeElement elemnt = wdContext.currentContextElement();
// your date element
    IWDAttributeInfo info = wdContext.getNodeInfo().getAttribute("date1");
// date attibute
   wdComponentAPI.getMessageManager().raiseInvalidContextAttributeMessage(
    elemnt,info, IMessageCreatePDF.INV__DATE, new String[] {}, true);
// IMessage<YourComponentName>.<Messages>
// this will araise exception
nikhiL

How to catch NaN, infinity errors?

Example lets say i want to detect a NaN error
when detected a error dialog appears
taking this as an example
String s;
        float Number;
        double Ans;
        s=txtNumber.getText();
        Number=Integer.parseInt(s);
        Ans= Number*2;
       s=String.valueOf(Math.toRadians(Ans));
      txtProduct.setText(s);
     } if ((Ans).equals("NaN"))
      if(true){
      JOptionPane.showMessageDialog(null,"Try Again.","Inane warning",JOptionPane.ERROR_MESSAGE);Can some1 tell me where i am wrong this works but for everything
including Nan and Infinity i only want to detect NaN or Infinity
now ive tried the second method isNaN and isInfinite
if((double).IsNaN(Ans)); II .IsInfinite(Ans)
if(true); same as above public boolean failed to detect NaN or Infinity either returns true when its not false when its not
with the dialog message keeps poping up
and
even with catch
try{
Ans=Number*2
}catch (ArtithmeticException e) method the second and third dont give errors and they dont even detect NaN nor Infinite when the dialog is to show it doesn't
ive tried this aswell
if (txtProduct.setText(s).isNaN(Ans)){
if(true){
dialog should appear
i get an error saing double or float or void cannot be differenced
im posting this here for the experts who can figure this out
try test the simple code before i could work and implement a more complex one later
your help on this one
thanks
Edited by: AK-Emm on Sep 5, 2008 7:29 PM

AK-Emm wrote:
float Number;
double Ans;
Number=Integer.parseInt(s);
Ans= Number*2;
if ((Ans).equals("NaN"))
You have an integer, which you convert to a float and then a double. You then check if it is NaN. There are no integer values for which this sequence of operations will produce a NaN.
Are you coming from working in a language where 'NaN' is used to signify that parsing the string failed? In Java, the method throws NumberFormatException rather than returning NaN. This is done so that client code is simplified as the error handling is separate from the main flow, because NaN is a double not an int and Java is mostly strongly typed, and because Double.parseDouble("NaN") should return NaN without it being an error.

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

How to catch PL/SQL: ORA-04052 error?

I need to execute a procedure that select remote objects but the remote db is a RAC DB and I only have access to one of the nodes, the remote RAC have load balancing enabled and the remote DBA can’t create a DB Service for my connection, so, I have to re-run the execution of my procedure until it connects successful to the remote DB through a db link, but I can’t catch the error ORA-12541: TNS:no listener.
Someone knows how to catch the error??
set serveroutput on
declare
function F_DATE return sysdate
is
ld_return date;
begin
begin
select sysdate into ld_return from dual@dbl_bnvalores;
exception
when others then
ld_return := f_date;
end;
return ld_return;
end F_DATE;
begin
dbms_output.put_line('Remote sysdate: '||f_date);
end;
Error at line 2
ORA-06550: line 2, column 26:
PLS-00562: a function must return a type.
ORA-06550: line 7, column 42:
PL/SQL: ORA-04052: error occurred when looking up remote object BNSAFI.DUAL@DBL_BNVALORES
ORA-00604: error occurred at recursive SQL level 1
ORA-12541: TNS:no listener
ORA-06550: line 7, column 7:
PL/SQL: SQL Statement ignored

I could confirm that you would never branch to the exception in case of no listener!
So another possibility that comes to mind is to enclose the remote select in an execute immediate and only execute it if you could establish a connection via UTL_TCP:
Something along those lines:
michaels> DECLARE
   conn               UTL_TCP.connection;
   l_date             DATE;
   no_listner_excep   EXCEPTION;
   PRAGMA EXCEPTION_INIT (no_listner_excep, -29260);
BEGIN
   conn := UTL_TCP.open_connection ('fleet', 1569);
   EXECUTE IMMEDIATE 'select sysdate from dual@fleet_new'
                INTO l_date;
   UTL_TCP.close_connection (conn);
   DBMS_OUTPUT.put_line (l_date);
EXCEPTION
   WHEN no_listner_excep
   THEN
      DBMS_OUTPUT.put_line (SQLERRM (SQLCODE));
END;
ORA-29260: network error: TNS:no listener
PL/SQL procedure successfully completed.

How to catch error in the Active Sync process

Hi, we are using Flat File active sync to update IDM user attribute. Once IDM found matched record, it builts view. However, during this period, the the matched user is locked, for example. Then IDM stop processing this record then go to next record. How can I catch this error? In log file I saw error message but how can use workflow or other way to know the error? How can get ResultItem that contains error message during AS?

Hi,
I am doing the following....
Assume a main workflow which calls many sub workflows ...
1. Define two global variables as follows
<Variable name='anyErrorOccured'><Boolean>false</Boolean></Variable>
<Variable name='allErrorMsg'><s>Error..</s></Variable>
2. In the all main and sub workflows, add an special 'Action' to check the errors after each Action
<Action id='1' name='doSomething'>
</Action>
<Action id='2' name='checkForErrors'>
<cond>
<isTrue><ref>WF_ACTION_ERROR</ref></isTrue>
set the anyErrorOccured variable to true
Append a custom error message(hard coded) to allErrorMsg variable - error message may contain workflow name and in which action error occured
</cond>
</Action>
3. Before ending the main workflow, if anyErrorOccured is true, then send an email to IDM administartor with allErrorMsg
<Activity id='3' name='CheckOverallError'>
<Transition to='SendOverallErrorNotificationToIDM'>
<ref>anyErrorOccured</ref>
</Transition>
<Transition to='end'/>
</Activity>
Hope, this helps.
Furthermore, I tried to catch the actual error trace from IDM using the following in each 'checkForErrors' Action and append all IDM error messages for email notification.
<invoke name='getMessage'>
<get>
<invoke name='getErrorMessages'>
<ref>WF_CASE_RESULT</ref>
</invoke>
<i>1</i> ???????
</get>
</invoke>
But , it was not successful, as I could not extract the right error mesage at the right place from WF_CASE_RESULT

How to catch error executing a preocedure

Hi All.
I have done a workflow to execute a oracle procedure who performs DML (truncate table).
How Can I cacth an error code of procedure in workflow ?
Thanks,
Marco

Hello,
Have you already tried by catching the errors in you procedure and then as action you enforce the ending of the procedure as error ? In your workflow you are then able to perform a special action if the procedure ended with error or if it was successfull.
I can't remember the code I used to do that on my previous project but I know that it worked like that.
Regards,
Florent

How to catch following error ---- JBO-25013: -----plz reply

can any one plz tell me how to catch and display this error.....
as an arror message box?
please reply as early as possible....
thanx
detail error page---
oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[06927 ]. at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:796) at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:5585) at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:4712) at oracle.jbo.server.EntityImpl.merge(EntityImpl.java:5058) at oracle.jbo.server.EntityCache.add(EntityCache.java:565) at oracle.jbo.server.ViewRowStorage.entityCacheAdd(ViewRowStorage.java:1762) at oracle.jbo.server.ViewRowImpl.entityCacheAdd(ViewRowImpl.java:2151) at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1070) at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943) at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2842) at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203) at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088) at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468) at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650) at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2818) at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2687) at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2634) at oracle.jbo.server.ViewRowSetIteratorImpl.getRowAtRangeIndex(ViewRowSetIteratorImpl.java:722) at oracle.jbo.server.ViewRowSetImpl.getRowAtRangeIndex(ViewRowSetImpl.java:3672) at oracle.jbo.server.ViewObjectImpl.getRowAtRangeIndex(ViewObjectImpl.java:6263) at oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel._bringInToRange(FacesCtrlRangeBinding.java:541) at oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel.setRowIndex(FacesCtrlRangeBinding.java:504) at oracle.adf.view.faces.component.UIXCollection.setRowIndex(UIXCollection.java:378) at oracle.adf.view.faces.component.UIXTable._processStamps(UIXTable.java:496) at oracle.adf.view.faces.component.UIXTable.processFacetsAndChildren(UIXTable.java:377) at oracle.adf.view.faces.component.UIXCollection.decodeChildrenImpl(UIXCollection.java:141) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:803) at oracle.adf.view.faces.component.UIXCollection.processDecodes(UIXCollection.java:136) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:818) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:803) at oracle.adf.view.faces.component.UIXComponentBase.processDecodes(UIXComponentBase.java:673) at javax.faces.component.UIForm.processDecodes(UIForm.java:144) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:818) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:803) at oracle.adf.view.faces.component.UIXComponentBase.processDecodes(UIXComponentBase.java:673) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:818) at oracle.adf.view.faces.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:803) at oracle.adf.view.faces.component.UIXComponentBase.processDecodes(UIXComponentBase.java:673) at javax.faces.component.UIComponentBase.processDecodes(UIComponentBase.java:880) at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:306) at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196) at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

Hi,
have a look at SRDemo that you can download through JDeveloper (help--> check for updates) and see
SRDemoADFPhaseListener.java
and
SRDemoPageLifecycle.java
in the oracle.srdemo.view.frameworkExt package
Frank

How do i get rid of type error null is an object on my iphone ? It keeps popping up on my yahoo, please help ?

How do i get rid of type error null is an object on my iphone ? It keeps popping up on my yahoo, its driving me mad, please help.

That's probably a Javascript error in what Yahoo is producing. Contact Yahoo and inform them of the problem.

How to check error type in accessing web service?

Dear all,
I have created a form using WSDL connection to access web service in SOAP protocol.
But I have difficulties in error handling when acccessing web service.
I try to put a try catch block for the following statement :
ie. xfa.connectionSet.WebServiceDC.execute(false);
in case for any error, I can only catch message saying GeneralFault only.
Is there any extra object in the script that I can catch to handle for different error type?
e.g checking SOAP.? and where should I put the codes in?
Actualy I want to detect if network connection is not ok or if it fails to find ecert which is required under https connection
Rgds.

Have you tried the try catch block ?
See the error codes it responds with.
Then look through the properties of the Exception
try
    doInit();
} catch(err)
    var vDebug = "";
    for (var prop in err)
       vDebug += "property: "+ prop+ " value: ["+ err[prop]+ "]\n";
    vDebug += "toString(): " + " value: [" + err.toString() + "]";
    status.rawValue = vDebug;
function doInit()
    doWebServiceCallThatFails();
Have fun with these articles
http://blogs.adobe.com/formfeed/2009/06/collected_form_development_and.html
http://blogs.adobe.com/formfeed/2009/03/handling_javascript_exceptions.html

How to catch thrown error when implementing HttpSessionBindingListener?

I would like to write code to implement the class HttpSessionBindingListener for using the valueBound and valueUnBound method.
As I have put some codes for inserting data in database when the valueBound method is invoked, I would like to catch the SQLException error when insertion fails. However, when i try the following:
public class SessionTracker implements HttpSessionBindingListener
throws Exception{
Compilation error like the following appears:
Class SessionTracker should be declared abstract; it does not define method valueUnbound(javax.servlet.http.HttpSessionBindingEvent) in interface javax.servlet.http.HttpSessionBindingListener
My question is: How can I throw caught error?
Thanks for replying!

May be i should clarify a little bit?
My question is: What error would the implemented method throw?

How to catch/read mal-formed xml at Error Handler.

I have added Error Handler at starting node of Message Flow in a Proxy Service and its(Proxy Service) listenning to a JMS queue.
So when i am putting a mal-formed XML into the JMS queue, getting "Failure while unmarshalling message: Failed to parse XML text" error at ALSB server log.
But i am not able to capture the mal-formed xml inside Error Handler node.
Can any one help me how to capture input mal-formed xml in Message Folw.
Thanks in Advance.
Regards.
Deba

Re: How to catch malformed xml using error handling mechanism in from a proxy? Had a solution for similar issue. It appears that in-case of malformed XML, $body will not be populated with faulty xml snippet. One way out of this solution is, design your service as Text service and create another service isXML as explained in my above reply.
Thanks
Manoj

How to catch errors in calling program when using SUBMIT ... AND RETURN ?

Hi ,
I am calling a report using submit and return statement from a function module. The report has select-options field for a date field. If user enters a date in low, which is greater than high, getting error message "Lower limit is greater than upper limit".
How to catch this error without endup stoping on selection screen of the report?
In the documentation, I read :
Programs called with SUBMIT ... AND RETURN or CALL TRANSACTION cannot propagate exceptions to the caller, because exception objects are bound to the internal mode of a program.
Is there any way to overcome this?
Also my aim is to write a validation on the date selection-option to have the date range not more than 20 days.
I am not sure of how to achieve this.
Is there a way to do validation of select-options data before submiting to the report ?
Is there any standard FM to achieve this task?
Thank you,
Surya.
Edited by: Surya on May 24, 2009 6:08 PM

Hi Surya ,
In your function module's code validate the date .
If the low value of the date less than high and date period is not more than 20 then
call transaction and in else condition raise exception.
In your FM write like that - -
IF   date-low LT date-high AND
                       date_difference LE '20' .
CALL TRANSACTION   'transaction'.
ELSE.
RAISE ........... " Raise the invalid date exception
ENDIF.
Regards
Pinaki

How to catch SMPP gateway error type ?

Similar Messages

Maybe you are looking for