How to catch/read mal-formed xml at Error Handler.
I have added Error Handler at starting node of Message Flow in a Proxy Service and its(Proxy Service) listenning to a JMS queue.
So when i am putting a mal-formed XML into the JMS queue, getting "Failure while unmarshalling message: Failed to parse XML text" error at ALSB server log.
But i am not able to capture the mal-formed xml inside Error Handler node.
Can any one help me how to capture input mal-formed xml in Message Folw.
Thanks in Advance.
Regards.
Deba
Re: How to catch malformed xml using error handling mechanism in from a proxy? Had a solution for similar issue. It appears that in-case of malformed XML, $body will not be populated with faulty xml snippet. One way out of this solution is, design your service as Text service and create another service isXML as explained in my above reply.
Thanks
Manoj
Similar Messages
-
How can I read a form using session in javaServerlet?(thanks)
How can I read a form using session in javaServerlet?(thanks)
you can not. You get the form entries through the request object.
-
How to use Request header in the OSB error handler
Hi
I have a scenario where OSB proxy service accptes the payload and routes to the target service
and before routing, I'm generating UUId and inserting in to the request header and publishing the request payload along with UUID to another service.
when the target service is thrown some business fault,i need to publish the fault along with the header(which has UUID).since my target service sends only fault body,header is getting emptied in the error hanlder section.
How can I use the requestheader in the error handler section. Any help is highly appreciated.
Thanks,
N
Edited by: user13154768 on Sep 23, 2010 3:25 AM
Edited by: user13154768 on Sep 23, 2010 3:26 AMJust assign your request header ($header) to your variable (e.g. $myRequestHeader) and than use this variable in your error handler. Fault response will override your $header but can't override $myRequestHeader.
-
How to display the edit form(xml form builder ) in the iview
Hi all ,
i'm doing one appication in xml formbuilders . i cerated a form and i call that form into a folder in documents of content manager. i able to dispaly the show form . now i want to edit the content of the from through portal iview . i tried using KM navigation portal .but i am able to diaplay the edit form .
can any one tell me how to do this
thanks
rajeev.You need the right UI command. Look into the delivered NewsExplorer and NewsBrowser Layout Sets. http://help.sap.com/saphelp_nw70/helpdata/EN/6a/e8df3dffadd95ee10000000a114084/frameset.htm
-
LiveCycle Designer how make full Reader Extended Form
HI, I have developed a Dynamic Form using Live Cycle and then taken into Adobe PDF to add bookmarks. Finally save as a Reader Extended Dynamic Pdf with form fill options. Now the problem is that it is not fully extended and a person who is filling a form can not add comments. Any idea how can I get it done or anybody from Adobe help me by the right licence to activate this feature. Thanks.
Moved to LiveCycle Designer
-
Hi
i have a multi-language application, i need to read validation message from xml file to get message as languageSee the Fusion Developer's Guide section 4.7. "Working with Resource Bundles" (http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcentities.htm#BABJACFB) and section 7.7.2 "How to Localize Validation Messages" (http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm#sthref729)
-
Pls How do I read/write a xml file using java
I want to read/write trough a server/client a file.xml from evt. the same computer, this is the code for the client
import java.io.*;
import java.net.*;
class client
public static void main (String args[]) throws Exception
final String msg = "<beg>note</beg>";
// BufferedReader in = new BufferedReader(new FileReader("note.xml"));
final Socket clientSocket = new Socket ("localhost", 8000);
final OutputStream clientStream = clientSocket.getOutputStream ();
clientStream.write (msg.getBytes ());
// clientStream.write (in.getBytes ());
clientSocket.close ();
// BufferedReader in = new BufferedReader(new FileReader("note.xml"));
// System.out.println(in.readLine());
I want to read it and put it in a buffer...
please somebody help me!!!
regards
HarryPls read this:
http://forum.java.sun.com/thread.jsp?forum=31&thread=271751
And don't post the same message twice. It's annoying. -
How to delete data definition form XML Publisher Administrator
Hi all,
I want to ask is there any possibility to delete existing data definition from XML Publisher Administrator responsibility?
Version: 11.1.0.7.0
Regards,
Alexander.Hi,
Once you opened the page, before do any action in it follow the below steps.
1. Click the link 'About this page' in the left bottom.
2. Click the Expand All option under page definition
3. Then click on the view object 'TemplatesVO2' against the view attribute 'Data Source Name'
4. A select query will be appeared in that you can find the source table for that particular page.
Regards,
Sathya -
How to catch "an insufficient number of arguments" error?
Hi All,
I have a question - how to cauch this error:
SELECT * FROM dbo.ExistingFunction ('Wrong number of params - ExistingFunction expects 2 of them')
I tried using try-catch (both on the same level and one level higher) but with no success.
Best Regards,
MikeThere are a couple of variations with this error, because it depends on when the mismatch between the caller and the function occurs.
1) The function call is incorrect when you attempt to create the procedure => the procedure will not be created.
2) The function was correct when you created the procedure, but the function was changed before the procedure was compiled and put into cache. In this case compilation of the procedure fails, and it is never entered. And thus you cannot trap it in the procedure
itself. You can catch it in outer scope.
3) The function was changed after the procedure was put into cache. This causes a statement recompile at run-time, and as will all compilation errors, you cannot catch this in the local CATCH block despite you have entered the TRY block. You cannot however
trap it in the caller.
You say that you are not trap it even one level higher, but that is certainly possible, as testified by the repro below:
[sql]
CREATE FUNCTION funkis (@a int)
RETURNS @r TABLE (a int) AS
BEGIN
INSERT @r VALUES(@a + 1)
RETURN
END
go
CREATE PROCEDURE inner_sp AS
BEGIN TRY
PRINT 'Entering inner_sp'
SELECT * FROM dbo.funkis(1)
PRINT 'Exiting inner_sp'
END TRY
BEGIN CATCH
PRINT 'Error trapped in inner_sp: ' + error_message()
END CATCH
go
CREATE PROCEDURE outer_sp AS
BEGIN TRY
PRINT 'Entering outer_sp'
EXEC inner_sp
PRINT 'Exiting outer_sp'
END TRY
BEGIN CATCH
PRINT 'Error trapped in outer_sp: ' + error_message()
END CATCH
go
EXEC outer_sp
PRINT '------------------------'
go
ALTER FUNCTION funkis (@a int, @b int)
RETURNS @r TABLE (a int) AS
BEGIN
INSERT @r VALUES(@a + @b)
RETURN
END
go
EXEC outer_sp
go
DROP FUNCTION funkis
DROP PROCEDURE inner_sp, outer_sp
[sql]
Erland Sommarskog, SQL Server MVP, [email protected] -
How to use Fault schema in WSDL for Error Handling in ALSB
We are not able to view the fault element in our alsb flow under body variable and when we get the error in test console the error comes in bea fault schema,but we want the error in our own defined fault schema.Pls. guide.
Below are the steps we followed to create a wsdl.
Steps:
1. We created a webservice project in workspacestudio and generated a wsdl.
2. Then we have added a fault element manually in that wsdl.
3. Now we have generated a webservice from that modified wsdl.
4. Again we have generated a wsdl from webservice created in step 3.
5. step 4 wsdl is tested and running well on server.
When we try to configure that service as Proxy/Business service in ALSB and view the XPATH Expression Editor, we are not able to view Fault element under variable structures under body variable as shown below.But when we see the design view of our running wsdl in workspace studio it shows the fault element.How to get the fault element in variable body so that we can view the error in our logs in our defined Fault schema instead of BEA fault schema.WDSL is enclosed as an attachment.
Thanks in advanceHave you tried using the "Log" action in your pipeline proxy and log for $body and $fault. This will defin return the $body and $fault if these were parsed correctly
-
How to make an XML in form of String to well-formed XML document
Hi Folks,
Thanks for all you support in Advance, i have a requirement, where i have an XML in one line string form and i wondering how to convert into well formed XML?
Input XML sample:
<root> <one><link1></link1></one><two></two> </root>
to well-formed XML
<root>
<one>
<link1></link1>
</one>
<two>
</two>
</root>
I was trying to create a well-formed document using DOM or SAX parsers in ExcuteScript activity, but it is leading to some complicated exceptions. And i am looking for the simplest way for transformation.
Please let me know
thanks,
RajeshRajesh,
I don't understand. There is no difference between the two XML instances other than whitespace. They are both well-formed XML.
<root> <one><link1></link1></one><two></two> </root>
<root>
<one>
<link1></link1>
</one>
<two>
</two>
</root>
Steve -
WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
Ahsan RanjhaHi,
In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
SharePoint 2013 REST API
http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
SharePoint 2013 Client Object Model
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
Best regards
Patrick Liang
TechNet Community Support -
Reading the form as XML, using WDJ
Hello.
I'm using WD for Java and ZCI layout.
I've seen this thread-
Re: Data in dynamic table not pass to webdynpro java
about getting data from tables in the form by reading the form's XML data.
I tried to search for a method to get the XML in IWDInteractiveForm, and other classes, but I didn't find anything.
So how can I get the form's XML when the user clicks Submit?
Best regards,
Arik.Hi Kathy
After loading a form over XML, we made the experince that in matrices link buttons will not appear everwehere they should. It's a tricky part and we made a work around by changing the columns order and then...the Link Buttons came up ok.
regards
Kurt -
How to read a incorrect XML file using file adapter
Hi',
I have a XML file which is incorrect,
example
<?xml version='1.0' encoding='UTF'?>
<emp>
<empid>100</empid>
<empname123>yatan</empname>
</emp>
now we can see that the XML data *<empname123>yatan</empname>* is incorrect,
so if we have to read this type of XML in BPEL is it possible to read it or can we read it with some work around
I have tried one way to achieve this,
I read this XML with file adapter opaque read operation, and inside the BPEL process used Base64Decoder (Java embedding) to decode the
opaque data to XML, it works to some extend. I am able to see the only the data like,
100 yatan
If I read a correct XML with same approach the data is a complete XML like,
<?xml version='1.0' encoding='UTF-8' ?>
<emp>
<empid>100</empid>
<empname>yatan</empname>
</emp>
can some one advice me how to achieve this, or some one has done this before
thanks
YatanWhat initially I have thought is,
once a incorrect file comes in this failed directory, some BPEL process should get invoked and feed the data to user, for this I thought of designing a BPEL process which will poll this failed directory, so for this we will need a empty BPEL process which will pick the file and then pass the data, the issue is I need to use here a opaque read and I dont know how to convert back the opaque (faulty XML) back to string.
I have already tried to convert the opaque to XML using java embedding but for faulted XML only the data comes back in the form of string, where as need the complete XML back, can you suggest how to do this.
thanks
Yatan -
How to:
1. Submitt form as PDF and not XML
2. Allow user to save to computer
ThanksThanks For the Post!!
Please be advised that this forum is for discussions about
the Acrobat.com online services only. Your best source of questions
and answers for Acrobat would be in the
Acrobat Windows
Forums or the
Acrobat Macintosh
Forums.
Maybe you are looking for
-
Problem with Enable scalable feature of XSLT processor
Hi Gurus, I'm using BI Publisher 10.1.3.4.1. I've having a report, when running in a specific sequence (i.e. after running with XML dataset 1 then dataset 2), will yield an error. Here is the log I got in the xdo.log. [061411_110902953][][EXCEPTION]
-
In MIGO , How to restrict the user to change the posting date?
Hi All, In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date. Thanks in advance. GP
-
when i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx
-
GW Letter for anyone who needs one :)
A WHILE ago I sent a GW Letter and it got accepted A couple of people emailed me for it, but I couldn't find it. Well, I have good news I found it by accident while cleaning up my computer. Feel free to copy it and cater it to your situation. Thi
-
I'm trying to process a file using wcf custom adapter 64 bit on Biztalk 2009. The sql server that is receiving this file is SQL server 2005 enterprise edition SP 3 and 32 bit machine. I'm dropping the file in the receive location and it gets picked u