How to change data in item table in sales order in UI

Hi Experts ,
i have 5 products line items in my item table in UI in sales order and i want to change the status of third line item on the basis of some condition .
please guide me how to do it .
thnx in advance

Hi Abhinav,
You can assign a status profile to the item category of Item 3. Then set the condition depending on the new status profile.
Hope this helps..
Regards,
Shwetha

Similar Messages

How to combine the line items of 2 Sales orders into 1 delivry

how to combine the line items of 2 Sales orders into 1 delivry
and their process, pre-requisites and tcode

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

How to delete the line item from a sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How to change data in decision table using excel file in operating system?

Hello, BRF Experts
I now brf + for the first time in the current project is being developed.
Now, project has been facing a big problem.
Develop system that was developed in the history of decision table in the operating system can be used to update excel file, etc. I do not know whether.
So, I was tested, but can not change data in decision table.
[ error message : system is not change allowed ].
The operating system itself to the current system setting is immutable and check it
: changes and transports for client-specific object -> no changed allowed
: cross-client object changes -> no changes to repository and cross-client customizing object.
Decision table in the operating system can update the details if I want to know what to do.
Maintenance view can be modified in the operating system as a decision table, I wonder if you can create a view.
Edited by: Sung-Wook Ha on Jan 13, 2012 2:02 PM

Hi ,
Exchanging data with Microsoft Excel is done with the help of the XML-based file format (file extension .XSLX) introduced with Microsoft Excel 2007. If you are using an older version of Microsoft Office, you can download the Microsoft Office Compatibility Pack to upgrade the supported file formats from the Microsoft Download Center ([Exchanging Decision Table Data With Microsoft Excel |http://www.microsoft.com/downloads/details.aspx?familyid=941b3470-3ae9-4aee-8f43-c6bb74cd1466]). Once you have downloaded the Compatibility Pack, you have to install it on every workstation that has an older version of Microsoft Office installed.
Please refer the link-
[BRFplus-Data exchange with MS Office 2007|http://help.sap.com/erp2005_ehp_05/helpdata/en/b8/e03486d1df48c6baa3c4354f5198ee/frameset.htm]
Hope this helps.
Thanks,
Ajay

How to update SIS Structure S503 table for Sales Order

Hi All,
I have a requirement where i want to restrict S503 table getting updated for an Item Category. Can somebody please help me in this.
Complete scenario:
I am splitting Sales Order line item into multiple Sub Line items based on batch determination. So for a line item 10 in Sales Order having ordered quantity 1000 i have 2 more sub line items 101 and 102 based on 2 available batches having 500 quantites each. When Sales Order is saved S503 have 1 entry for SO created but the ordered and confirmed quantity is doubled as it is picking it from main line item 10 as well as from 101 and 102.
Is there any way to restrict the main line item entry quantity from getting in to SIS structures.
Thanks,
Sudhir.

Hi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram

URGENT - How to change data in a table

I have created the basic table to display some data. But how do I change some of the data in the table. I generate the data within my program and then need to display the new table data in the same original table.

So far I am just testing with the example codes from the sun website. How would I change the name Mary to say Kate? Do I have to implement an abstract table model? Can I just change the value in the array or something?
Thanks in advance
// create the table
               Object[][] tableData =
            {"Mary", "Campione",
             "Snowboarding", new Integer(5), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new Integer(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Chasing toddlers", new Integer(2), new Boolean(false)},
            {"Mark", "Andrews",
             "Speed reading", new Integer(20), new Boolean(true)},
            {"Angela", "Lih",
             "Teaching high school", new Integer(4), new Boolean(false)}
          String[] columnNames = {"First Name",
                                "Last Name",
                                "Sport",
                                "# of Years",
                                "Vegetarian"};
          final JTable table = new JTable(tableData, columnNames);
        table.setPreferredScrollableViewportSize(new Dimension(500, 100));
          //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
          //Add the scroll pane to this window.
        //getContentPane().add(scrollPane, BorderLayout.CENTER);
          displayPanel.add(scrollPane);

How to change data element in table?

Hello all:
I just need to change data element for a field in some Z table. I know I can do it through SE11 but I just want to make sure if there is anything I should be aware of? Are there any other steps I should perform apart from making changes through SE11? Any information you could provide would be great.
Thanks.
Mithun

Hi Mithun,
Yes, you can change the table using SE11. After saving, check for errors and activate. Using Menu, Utilities
-> click on Database Utility and then click on 'activate and adjust database'.
Hope this helps.
Thanks,
Srinivasa
Message was edited by:
Srinivasa Bhanuprasad Moningi

How to fetch data from item table

Hi,
Can some one give me the code to get the details from the item table details into MI client.
Thanks and Regards
Manohar

hi,
are you on MI7.0 or MI7.1? And you have the data already on the client and just want to see the details?
If it is MI7.0 - send me a mail and I send you a few codelines that will do that for you.
Regards,
Oliver

How to fetch data from CDHDR Table based on Order Number

Hi,
I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
PARAMETER : S_OBJECT FOR /BEV1/RBVBAK-AUFNR OBLIGATORY.
DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
             WA_CDHDR LIKE LINE OF IT_CDHDR,
             S_OBJECT1 LIKE CDHDR-OBJECTID.
CONCATENATE sy-mandt '30' S_OBJECT INTO S_OBJECT1.
SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.

P838355 wrote:>
> Hi,
> I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
>
> HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
>
>
> PARAMETER : S_OBJECT FOR /BEV1/RBVBAK-AUFNR OBLIGATORY.
>
> DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
>              WA_CDHDR LIKE LINE OF IT_CDHDR,
>              S_OBJECT1 LIKE CDHDR-OBJECTID.
>
> CONCATENATE sy-mandt '30' S_OBJECT INTO S_OBJECT1.
>
> SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.
You need to loop through the select option and concatenate with required data then select using 'in' instead of equal or select one by one.
or
select sales order numbers from VBAK for the selection into internal table then loop through the internal table and concatenate then select from CDHDR.
for better performance use objectclass in where clause. the value for sales order for objectclass is VERKBELEG.
in my system the object id is just an order number there is no other additions to it but in CDPOS the tabkey contains the order number with client and other information also.
the 30 may be your item number... check it
go ahead and change sales order and see what you can find in CDHDR
Good luck
Edited by: Sampath Kumar on Oct 21, 2009 9:02 AM

How to change value of GL account on sales order line item

I am trying to change COGS account based on discount percentage. How do I write formatted search?
discount filed is $[$38.15.1] and I need to change COGS account if discprcnt = 100 on sales order
Thanks

Thanks again Jim and Manikadan
I had to modify the query a little bit to following but I was able to change the COGS account on FMS.
Declare @prcntdisc as nvarchar(20)
Declare @acctcogs as nvarchar(20)
Declare @defaultcogs as nvarchar(20)
SET @prcntdisc = (SELECT $[dln1.discprcnt])
SET @acctcogs = '67000015-01-001-03'
SET @defaultcogs = (SELECT C.FormatCode
              from
               dbo.oitb A
               inner join dbo.oitm B on B.ItmsGrpCod = A.ItmsGrpCod
               inner join dbo.oact C on A.SaleCostAc = C.AcctCode
              where
               B.ItemCode =(SELECT $[dln1.ItemCode])
if @prcntdisc like '100.%'
begin
Select @acctcogs
end
else
begin
Select @defaultcogs
end

Ship to party Jursidiction code change at line item leve in Sales order

Hell Gurus,
         Here is requirement for enhancement in Sales order. For determining tax following logic is requird to modify jursidiction code of ship-to party at line item level.
after entering header details and line item, then user exit should be there(which user exit??) and i need to compare countries of Ship-from(Plant i believe) and Ship-to party(customer) if country is same, then jursidiction code of Ship-to party at line item level should be changed with value from Jursidiction code of Ship-from party(plant this value will come from <b>T001W</b>) table. this should happen before save(while entering line items, user may go and check jursidiction code change)
what i need here is which user exit is triggerd ater line item entry, and how to change jursidiction value( i believe we need XVBAP, XVBPA, might be XADRC(Jursidiction code) . if some one provide user exit and logic with structure details then it would be of great help.
hoping to get reply
Thanks in Advance
Siva

Can you check in MV45AFZB Include but i am not sure
FORM USEREXIT_FILL_VBAP_FROM_HVBAP.
VBAP-zzfield = HVBAP-zzfield2.
ENDFORM.
FORM USEREXIT_SOURCE_DETERMINATION.
set source
VBAP-WERKS          = zzfield1.
set item category
VBAP-PSTYV          = zzfield2.
ENDFORM.
*eject
Reward Points if it is helpful
Thanks
Seshu

How to have a custom Item Number in Sales Order Items

Hello Experts,
We are creating a sales order using IDoc, sales order gets created but, its not taking value what we are populating in Item Number field for Item. Defualtly its filling 10,20 and so on...
Is there any thing that I need to maintain, so that SAP accepts the custom number for Item number.
Please help,
Thanks,
Suma

Hi Suma,
In VOV8, you can see the fields Number system..here u can see sub item increment u can enter 12 here then the next item number will be 500012, 500024 and so on. But if u want to maintain external number range then follow this steps.
Determine which external number ranges are provided for the relevant
document type. Choose the function "Maintain number range" of the
document type (for example: Purchase order -> Maintain number range)
for this purpose.
Choose a number range and note its number.
Enter the number of the desired number range.
Thanks,
Raja

HOW TO CHANGE DATA IN STANDARD TABLE

PLEASE HELP AS PER ABOVE.
THANKS,
LALIT

Hi,
You can use the statements UPDATE / MODIFY to change the DATA in a database table
UPDATE
The statement UPDATE changes the content of one or more lines of the database table specified in target. The entries in source determine which columns of which lines are changed, and how they are changed.
System fields
The statement UPDATE sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one line has been changed.
4 At least one line was not able to be changed, either because no appropriate line was found, or because the change would generate a line that leads to double entries in the primary key or a unique secondary index in the database table.
The statement UPDATE sets sy-dbcnt to the number of changed lines.
The changes are definitively copied to the database with the next database commit. Until that point, they can still be undone using a database rollback.
MODIFY
ex - modify <dbtab> from TABLE it_tab.
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.

Hi, How to change date pattern in project panel in order to sort media according to date YYYY-MM-DD and not MM/DD/YY ?

Hi
Question is in the title
I have the list of media and when I add columns from "metadata panel to the project panel, all dates are MM/DD/YY format and sort is not relevant !!
Where can I change this pattern to the right one ?
Thanks
Emmanuel

If you are on a PC then the instructions shown here should work for you. They did for me.
Change the display of dates, times, currency, and measurements - Windows Help
You just need to quit out of Premiere Pro after making the change and then start it up again.

How to change data in item table in sales order in UI

Similar Messages

Maybe you are looking for