How to change the display name in the filter view

Hi,
I have one column "*Year*" and type in case when 1=2 then "product_d"."name" else "calendar_d"."year" end.
I add a filter view for it. but when I select, like 2010, it will display"case when 1=2 then "product_d"."name" else "calendar_d"."year" end" is equal to 2010.
So how can I change it to "Year is equal to 2010"?
Any one have any idea about this?
Regards,
Anne

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

Similar Messages

  • How to get the display name of the dropdownlist?

    How can i get the display name of the dropdownlist.
    I want to have value as other data not the same as display name.
    In that case is there any easy way to get the display name of the selection from the dropdownlist.

    I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
              HashMap bleh = new HashMap();
              bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
              Iterator it = bleh.keySet().iterator();
              while (it.hasNext()) {
                   Object key = it.next();
                   SelectItem selectItem = new SelectItem(key, bleh.get(key));
              //And then later, when you want to retrieve the label
              bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
    CowKing
    Message was edited by:
    IamCowKing

  • How to change your displayed name

    How do you change your displayed name in iCloud?  I have tried changing the settings and I also update my Apple ID profile, but iCloud still displays my old name.
    The name displays in the upper right hand corner and is always displayed, even if you select Calendar, Contacts, Mail, Notes, etc.
    Any help would be appreciated.
    Thank you!
    JRinSanDiego

    Just had this problem myself. All you have to do is visit https://appleid.apple.com/ . Log in and you can edit your info. Best luck!

  • How to change 'captured' display name?

    How can I view, and more importantly edit, a 'captured' display name?
    I can view and change the display name I made for the contact entry in the address book, but cannot view, much less edit, the 'captured' display name (I looked at the address book using 'Notepad' and can see the entry of the 'captured' display name).
    This causes problems when I start entering the person's name since the 'captured name' often shows up.
    Scenario:
    (1) Person's name = John Doe; Original email address = [email protected]; First message received from original email address had a 'captured'/'sent' display name of 'John Doe'; I created and edited the contact entry / address card and explicitly entered 'John Doe';
    (2) Person now has a new primary email address = [email protected], but wants to keep original email address; With the new, primary email address, I edited the original contact entry / address card and change the display name to 'John Doexx' (keeping the original email address); I created a new contact entry / address card with a display name of 'John Doe' and entered the new primary email address.
    (SITUATION) When I create an email message and start to enter the name 'John Doe', several names are listed. In sequence, the consists of the first (i.e. 'original') address card up with the display name of 'John Doe', then the second ('new') address card with the display name of 'John Doe', and then the 'original' address card (again) with the display name of 'John Doexx'.
    Bottom line, I need to change the 'captured' display name for the first address card so it matches the display name I entered. Alternatively, TBird should ignore 'captured' display names if a display name is explicitly entered.
    P.S. This questions/issue does not involve a concern about the name actually displayed in the message, although that too should be addressed.
    Jim

    Jim
    In the '''address book''' click on the '''contat''' then right click choose '''properties''' that page where you in put the mane of the contact and email address there is a check box which when checked '''Always prefer display name over message header''' Try this and let me know if it works

  • How to change a field name in the client web interface

    Hello,
    I need to change name of the field in the Shopping cart Basic data (field Location). Where could I do this?
    Thank you in advance,
    Olga

    Hi
    <u>Which SRM Version are you using ?</u>
    Incase you do not want the storage location fiels displayed in the item details then you can modify the template saplbbp_sc_ui_its_300.html to hide the field.
    By creating screen variant in transcation SHD0 and implementing that screen variant in BBP_screenvariant BADI you can hide the fields.
    Let me know the transaction and fields what you want to hide I can look at it.
    <b>Related links -></b>
    Hide field in SRM"Shopping Cart Status-> Finding shopping cart" html screen
    Re: shide some search criteria in Shopping Cart Status
    Note 974236 - Shopping Cart - Field control
    Regards
    - Atul

  • How to change 'created by' name in the smartform

    Hi,
    I have copied one standard smartform into Z_smartform. My z_smartform is having 'created by' name as in standard smartform.
    Could anyone please tell me how to change that name to my name.
    Thank you,
    Regards,
    Kusuma.

    Hi,
    Now I understand. I tried to reproduce your problem by copying a standard smartform and the 'Create by' had my user ID.  But now you say you uploaded the smartform from a file it becomes clear.
    The uploaded smartform will retain the user ID from the original form, if you want to change this copy the form to a temporary name, then copy it back again to the original name.
    Regards,
    Nick

  • How to change your user name for the Ipod nano...

    Can anyone please explain how to change the user name on your Ipod nano?

    hiya!
    do you mean the nano's name in the ipod source list?
    if so, select the ipod in the itunes sourcelist. click on it once, and pause for a second or so. you should then be able to type in what you please.
    love, b

  • How to change my display name on Skype for Android...

    I want to change my Skype display name and don't have access to a computer, just my Nexus 9. Can I do it?

    Hi, satanfiras, and welcome to the Community,
    Skype does not permit an account name to be changed once it is created.  More information regarding changing a name as it is displayed can be found here:
    https://support.skype.com/en/faq/FA110/can-i-change-my-skype-name-or-display-name-in-skype-for-windo...
    The article is also customized for Mac.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Change the display name of the Profile Manager Portal?

    Hello.
    Does anyone know if it's possible to change the name that's displayed on the Profile Manager User Portal? It's using my server name and I'd rather it be something a little more generic? Is this possible?
    Thanks,
    Kristin.

    Hello,
    Currently, the Power View report doesn't support the drillthrough feature like "Go to URL".
    Personally, I recommend you that submit a suggestion at
    https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
    For more information about the features supported in Power View, please see
    Power View (SSRS).
    Regards,
    Fanny Liu
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Fanny Liu
    TechNet Community Support

  • How can I change the display name of a contact in my address book?

    If I open one of my contacts in the Address Book, the display name is the name of the organization. I want it to be the last name of the individual. How can I change that?

    Thank you for your reply. I realize from your answer that I didn't poise my question properly! If I have not entered anything in the 'Display name' field then the message header (i.e. the title of the business card) follows by default the name of the 'Organization'. I wanted to know if it's possible to change this so that the message header of the business card follows the 'Last name' of the person and not the name of the 'Organization'. Thank you!

  • How can I change the display name when I call someone?

    I recently gave a re-provisioned 8300 to a new employee. I wiped out the phone, and re-setup the phone in our exchange server to match the new user's settings.
    The only problem he's having is that when he calls someone, the display name shows the previous users name as the person calling.
    How do I change that?
    Thanks in advance,
    howe132

    You don't say what model the device is, but if GSM, make sure the SIM card has not been edited to the preview name.
    Options > Advanced > SIM card > Menu > Edit Sim Phone Number
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to change the Group Display Name in the UME?

    Hello experts,
    from time to time due to reorganisation our departments group names change.
    So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
    So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
    Is there a way to configure the UME to allow to modify the Display Names of Groups?
    Thanks in advance.
    Thomas
    Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

    Thank you for the quick answer.
    However my problem is still not solved.
    I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
    For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
    By exporting the group data:
    [group]
    gid=TeamA
    gdesc=All members of Team A
    user=member1, member2
    There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
    So far I didn´t find any solution.
    Any other ideas.
    Thanks in advance.
    Thomas

  • How to change display name of the attachment item attribute.

    Hello Experts
    I have a requirement to send a notification with attachment but attachment name should be attachment name,
    Is there any way to change the display name of the Attachment
    Please advise;
    Thanks
    Rajesh.

    Azmathulla,
    It is not possible to change the name of the server, but you can add a label to it (see attached screenshot).  And yes, it can be done during production hours, this doesn't affect the production data.
    Please let me know if this answers your question.

  • Changing the display name of project file folders for TOC

    I'm interested in changing the display names of the project file folders for my TOC. For example, I want to name the folder "01-intro" so that it is short and lowercase. But I'd like the TOC to say "Introduction to the System." I know I can manually rename the folder in the TOC either through its properties or by right-clicking => Rename, but I auto-create the TOC occasionally and I don't want to have to rename every folder every single time.
    Does anyone know if there is a way to set a persistent property for the folder so that its display name in the TOC is different? I am using RoboHelp 9. I saw an option called "Detail" in the properties of the WebHelp layout in RoboHelp 8 that seems like it may have done that, but I no longer see this property in RoboHelp 9.
    Any assistance would be much appreciated. Thank you.

    I think the lack of response confirms that if you are going to use Auto Create, you have to accept the way it is.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Change display name of the server under Equipment

    is it possible to change the display name of the LIVE / PRODUCTION blade under equipment --> Chasis -->Servers to our own naming standards.
    Attached is the screenshot of current names.
    UCS Manager Version 2.1(3a)

    Azmathulla,
    It is not possible to change the name of the server, but you can add a label to it (see attached screenshot).  And yes, it can be done during production hours, this doesn't affect the production data.
    Please let me know if this answers your question.

Maybe you are looking for

  • Date format in Discovere Reports

    We have created a workbook with a parameter which is supposed to show up an LOV for a parameter in the MON-RR format. Now this LOV shows up correctly in the Discoverer Desktop edition as MON-RR format, but when we view the same in Discoverer Viewer i

  • PDF Attachment in Purchase Requisition

    Hi, How do I upload a PDF document as an attachment in the purchase requisition? I'm able to upload a text file, but they want to upload a PDF document. Thanx Elan

  • House Bank Determination for Customer and Vendors.

    HI, We have two House Banks namely BOAAR and BOAAP one is for Paying Customers from BOAAR and another is for paying Vendors BOAAP. Now how will this House Banks are determined when F110 is done. that means, when paying system should pay VEndors from

  • Photoshop CS6 is downloaded even though the link states Photoshop CS6 Extended.

    Hello! A few days ago or so, I had downloaded Photoshop CS6 from the official Adobe site here (http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop), and wanted to only test it out. However, I did a very stupid thing and uninstalled all my M

  • User Presets Compatible Between LR Versions?

    I had LR 1.4 with some user presets. However, when I upgraded to LR 2.2, they were gone. Are user presets compatible across all versions of LR? Or, do I need to get ones specific for LR 2.2? And, should the user presets have automatically been picked