How to change the JCO reference of an existing model in CE 7.1

Hi All
I have read an article which explains the method to change the JCO reference of model but when I tried to follow the same steps in CE 7.1 i am not able to find the category "Model Settings" (on clicking model edit option) containing the property "modelInstance_defaultLogicalSystem" which needs to be changed.
So is there any other method that needs to be followed in CE 7.1 to change the JCO reference? or should i delete and recreate the models with new JCO reference.
Any suggestions would be highly helpful.
Regards,
Ashwin Kulkarni.

Hi Ashwin,
I guess you are not opening the models node. Open the models node shown in the web dynpro explorer.
---local Development [project1]
----Web Dynpro
----Application
----Model
--Model1 <<<<----Click Here and select properties tab
----Model Classes
----Component Interfaces
----Components
----Dictionary
----Resources
Then select the model for which you want to change the JCo references and then in teh properties tab you will find the desired propoerty and then just change the modelInstance_defaultLogicalSystem Property.
I guess this will solve your problem.
Thanks
Sarbjeet Singh,

Similar Messages

How to change the JCO reference to an existing model

Hi
We had created a few models with the 2 - default (WD_model..) JCO references, now is it possible to change the references to a different custom /name without re-importing the models again ?
The issue for us is very critical because, we need to maintain unique reference for all the models under each application for the same server.
please let us know asap.
thanks
sathyanarayanan

Hi Sathya & Ravi,
If you want to change only the JCO Destinations that your model refers to, then its very much possible to change their names.
But if the model stucture has got changed , then you should reimport that.
I guess, trying out the following steps for changing the names will work out for you.
1) For Medata Dest--
a) Click on the local disctionary stucture that has been generated by importing the model.
b) Click on the properties tab on the bottom right corner.There you shoulb be able to change the Metadata dest name.
2) For Application data Dest-
a) Right Click on model classes (model_Input & model_output) & then click EDIT.
b) Same Way, on the bottom right corner , Change whichever proerty you want to alter inlcuding the Dest Name.
In this way, you can mainten unique JCO references for all the models you are using in your project.
ReBudild & Redploy the entire project . Create the New JCOs Destinations in the content Admin & happily run your application.
Regards,
sandip

How to change the unique reference number of a EUL in Discoverer 4i

Hi,
My Discoverer version is 4i which comes default with EBS 11i.
Now i have created a New Custom EUL Using Database Exp and Imp.
According "http://docs.oracle.com/cd/B25016_08/doc/dl/bi/B13916_04/maintain_eul.htm#i1008612"
"if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL"
I have to change the Reference Number of New EUL.
This can be done by
start d:\<ORACLE_ HOME>\discoverer\util\eul5_id.sql
But i could not find this sql in 4i Discoverer Home.
/8.0.6/discwb4/util
Can any one help me in finding this.
Thanks in Advance
Krishna

Hi Krishna
The file is not called EUL5_ID.SQL in Discoverer 4i, I believe it is called EUL_ID.SQL.
Oracle only introduced the EUL5 notation when Discoverer 10g was released. This has continued on into 11g.
Why not go straight to 11g? Discoverer 4 is old and no longer supported.
Best wishes
Michael

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How to change the Data Foundation for an existing Business Element

My Issue:
I have quite a few reports that use the same Business View. The Business View has an under lying Data Foundation that uses a Dynamic Data Connection (DDC). I no longer want to use this DDC because production users are complaining they do not want to have to select a data source each time (multiple times when the report includes sub reports) they run/refresh their reports.
The Holy Grail:
I would like to change the Data Foundation that my Business Element layer is built upon and use another data foundation with identical tables, linking, and fields. The new data foundation would be using a production connection. This solves my immediate issue and has a great side benefit of providing a convenient way to promote reports from development to stage/test, to production and would not require production users to have to select which environment they want their report to run against.
I am logged in to BVM as administrator:
When I look at the Business Element layer Property Browser, I see a Data Foundation Property but is is disabled (such that it can not be changed).
Is there a way to change the Data Foundation that is used by an existing Business Element layer ?
I'd appreciate any help that someone can offer on this topic. Even if it is not possible and someone can shed some light on why this would not work or would not be a good idea, I'd be interested in learning

Technically No the system will not allow you to change as it is involved with many depreciation areas and change is not permitted for control reason.
You only need to retire the asset, reverse the postings, assign correctly and repost the values.

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

Existing cross Reference: how to change the name of the file it refers to?

Hi everybody,
I am a professional translator.
One client of mine sent me a complete FrameMaker 9 book file for translation.
I translated the content via a CAT-Tool and now am in the process of checking if cross references and markers are ok directly into the file.
I noticed that many cross references are linked to another file of the book. But in the process of translating each file separately, I gave them a slightly different name (I added the language at the end) so as to be able to recognise them eventually.
Now I have this problem: I cannot find in the cross reference interface where to change the name of the file into the new one the cross reference is supposed to refer to.
Am I right in wanting to change the file reference? If so, how do I do that?
Or is it better to avoid this task and rename the translated file into their original names ? Would it work then?
Thanks for your help.

... book file ...
... each file separately, I gave them a slightly different name (I added the language at the end) ...
I'm guessing that you renamed the component files by means other than using the Edit > Rename File from the Book menu.
If so, do over. Rename from the Book menu. It automatically revises all the cross-references in all the component files.
In a Book, the only thing that's safe to rename with the file manager is the .book file itself.

How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.

Dears ,,
how to change the path that sysprep were copied to reference computer when i capture the image from reference.
Should i modify some codes in LTIAPPLY.wsf? how to modify it?
Thanks.

Sysprep and capture has *Three* steps.
1. Run sysprep on the local machine (easy).
2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
3. Capture the drive in an *offline* state from within WinPE.
What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
a 100MB partition.
By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
Keith Garner - keithga.wordpress.com

How to change the reference of a Workbook to a Query

I have a Query Q1 and I have a workbook W1 for this query in 3.5, I copied query Q1 to a new Query Q2, and copied workbook W1 to a new workbook W2. (using RSZC)
Now I have Queries Q1 and Q2 and Workbooks W1 and W2. But as the workbook W2 is a copy of W1, it still has the reference to query Q1. Is there any way to change the reference of a workbook to a query ?
My requirement is, workbook W2 should refer to query Q2.
Appretiate your help.
Regards,
R. Vodnala

Go to design mode of the second workbook and change the query using the edit option to Q2 then your workbook W2 will refer to query Q2
Just to get the idea go through this link here it is shown how to change the query.
https://wiki.sdn.sap.com/wiki/display/BI/Issue%20with%20Migrating%20BEx%20Query%20and%20Workbook

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to change the page header?

Hi,
I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
Can someone guide me how to change the page header?
Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
This may seem like a lot of steps, but really - it goes quickly
** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
Step 1 - create a header portlet
=======================
If you're using Publisher...
=====
* Create a new portlet - choose the Header portlet template
* Upload your image / change the header in the rich text editor
If you're not using Publisher
=====
* Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
* Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
* Create a new remote portlet web service that references this HTML page
* Create a portlet from the web service - make sure the type is "header"
Step 2 - turn it on
=======================
* Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
* In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
* If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
Done
May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
That help at all?
Thanks,
Eric

How to change the owner of business rules

Hi,
How to change the owner of the business rule's in hyperion 11.1.2.1.
When i changed the owner name from planning to xxxxx i get "User not found reverting to nothing".
Kindly help me with what id should i login to EAS (essbase administration services console) and the detailed process of changing the owner of business rule in properties tab.
Cheers
Praveen
Edited by: Praveen on Nov 7, 2011 8:43 AM

No....
There is no 'ownership' of a tablespace. No such thing.
UserA.tbl1 is owned by UserA, which is the same as saying it is in the schema UserA. It might be in tablespace USERS. If you want to change which tablespace it lives in, you can 'alter table' it to the new tablespace such as BIG_USERS. It would still be UserA.tbl1. I think you can move it online using Oracle's online reorg abilities.
If you want the table to be owned by UserB, then you have to either export/import or CREATE TABLE AS SELECT it into UserB's schema. However doing so means that the table can no longer be referenced as UserA.tbl1. If you want that reference to work, you have to create a synonym in UserA's schema that points to UserB.tbl1. At no point does the ownership of the tablespace come in to question.
I think you meant 'schema' instead of 'tablespace' in your original quesetion.

How To Change Root Folder Reference for href - anythingslider links?

How To Change Root Folder reference for href - anythingslider links?
My root folder in Web Apps>Carousel in admin is set at /carousel/ (http://bestinscotland04.businesscatalyst.com/carousel/slide-2 - as an example) but I want it to link to a specific page at the root level (specifically /scottish-menswear/mens-highland-kilt-outfit).
I can't find the controls, css, or html file to enable my picture to link to this product page.
I'm sorry for the amateur question - I've never had formal training and it's always a reverse-engineering situation with me.
Thank you.

One way to address this is to use the Virtual Web Host feature.
I've uploaded a simple application note to help guide you through the steps.
An alternative would be to create an html at /Web/ which forwards to /Web/Joomla. Not a great solution, I know.
I'm sure there is a way to change the setting in a linux configuration file, but I don't know which file that is in. Maybe some other linux savy community members could help out with that?

How to change the JCO reference of an existing model in CE 7.1

Similar Messages

Maybe you are looking for