How to change the resolution af adobe captivate

Hi,
I have a surface 3 with high resolution (2160 x 1440).
In Adobe captive - the menu bar is very small due to the high resolution
So i tried to modify the resolution of adobe captivate in the compatibily mode but it won't work :-(
In the meantime, i will use the magnifer :-'( but it's not very convenient.
Can you stop my headache ? ;-)

resizeImage does not let you set 'Scale Styles'. If you want to scale the styles you need to use scriptlistner.
Here are examples for "Constrain Proportion" and "Resample Image".
activeDocument.resizeImage( undefined,undefined,300,ResampleMethod.NONE);// change the dpi without resample
activeDocument.resizeImage( new UnitValue(2,'in'),undefined,72,ResampleMethod.BICUBICSHARPER);// change width - defaults to constrain proportion
activeDocument.resizeImage( new UnitValue(5,'in'),new UnitValue(5,'in'),300,ResampleMethod.BICUBICSHARPER);// change both w and h - may or may not matain proportions

Similar Messages

How to Change the Resolution on the Monitor? Model HP 2011X- (20" flat screen monitor)

"input signal out of range, change settings to 1600 x 900 -60HZ" How to make this change?
I have a HP desktop PC and I recently purchased a HP 2011X (20" flat monitor). Initially, I hooked it up to the pc and it worked and I did not have to install anything. But the other day, I ran the Microsoft's Fix-it-Center and ran the resolution problem detection even though I did not have any problem with the resolution. Within 5 seconds, a dark black screen appeared with the following message:
INPUT SIGNAL OUT OF RANGE
CHANGE SETTINGS TO
1600 X 900 - 60HZ
It displays this message and then the monitor goes to sleep. I press the buttons at the bottom of the monitor and from time to time, it displays a resolution screen that shows the monitor's resolution is not 1600 x 900 but that HP recommends that setting. However, I cannot change anything and that small screen with black background disappears in a few seconds. I cannot see anything else and I have tried the following:
- Turned the PC on and off several times and the message is still there
- Unplugged the power to the monitor and re-plugged it and no change
- Unplugges the video cable from the PC to the monitor and re-plugged it and nothing
Please help. I cannot see the PC screens at all even though the PC is on. All I see is the black background screen with white text with the above message. How do I fix this when I cannot see the Windows screen or from the monitor.
Thanks,
Bob

Hello IE_PC_User,
Let's try to get your computer to the boot options and go into VGA mode to see if you can change the resolution then.
Start up your computer and start tapping away at the F8 key.
Once the computer presents you with the boot options choose the VGA mdoe.
It should boot up and everything look really out of place. Set the proper resolution and then reboot.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Does anyone know how to change the resolution of a bitmap in LabVIEW?

I need to do a LabVIEW program that changes the resolution of a bitmap to different values (i.e. 640x480, 320x240, etc.). If there is a way to perform this task, please let me know.

Discussed here
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to change the resolution of a file?

Hi, can someone please help me. I am working with illustrator CS and I am exporting a file as a jpeg. I need to print that file so when i export it i am changing the resolution to 150dpi. When i open the file in windows picture manager edit it and save the changes the file turns black and it prints a black page. This only happens when i change the resolution to 150dpi or higher if i leave it at 72dpi and make changes i don't have problems it will save fine. I have tried many different things but no luck. Hope someone here can help me. thank you.

Sounds like an issue with your image editor. BTW if you plan on editing the image you should use a lossless format from Illustrator to the editor then save as a jpg. Each time you save the jpg more and more data gets thrown out until it unusable.

How to change the resolution of a page in iWeb

Hi,
I'm making a website for a project, and I decided to do it in iWeb. The brief of mt project says the resolution has to be 1024*768, however, when I change the resolution to this, the page instantly looks horrible with a white border to the right of my content. Is there a way to change this, or centre my content in the white part?
Thanks,
Jonny.

There is no formula for a web page and you have to consider the type of content and what device the viewer is using.
A "standard" width for a conventional webpage could be considered to be 980px with a page height of no more than about 1200px to avoid too much scrolling. Any page that is much higher than this should, at least, have a "back to the top" button...
http://www.iwebformusicians.com/iWeb/Navigation.html
The browser width on personal computers is user adjustable and not everybody wants to fill the whole screen width.
The browser width on mobile devices is fixed and the user only has the option of portrait or landscape orientation.
US letter size is 8.5 inches wide by 11 high (816 x 1056 px) and the European A4 is 8.27 × 11.69 (794 x 1123 px). Either would be a good starting point for an e-zine.
The iPad is 768 px wide in portrait mode but remember that its not the only tablet available. I think Kindle is 600px wide and others are smaller.
Text on wide pages is difficult to read - hence the use of columns in magazines and newspapers.
Designing web pages for mobile devices in general is not possible with iWeb since it can only use a fixed page width. An example of a folding column magazine style layout can be found on this page...
http://www.ezmacwebdesign.com/showcase.html

How to change the currency in Adobe X Reader

Hello,
New here and looking for some help in changing the currency from the £ sign to a $ sign.
I am not very program savy so any help anyone could provide would be great!
Thank you in advance.

Is this a form you created in Acrobat or is it a form that you're using with Reader? If the latter, there's nothing you can do if the field has been set up to format the field with a £ for the currency symbol.

How to change the resolution on my Boot & Login Screen, There low resolution ?

Hi guys, Ok the situation I have is my Boot & Login Screen are at a Low resolution something like a 640 X 480, were my Desktop resolution is at 1280 X 1024, at 75 Hz, both of these were right until I updated from OSX 10.5.6 to OSX 10.5.8; from there on I have been getting this low resolution screen, an they are driving me crazy, is there any way to put them back as they were? Any assistance will be greatly appreciated. 73's

Hi, no idea how to cure it, but have noticed that it sometimes corrects itself, or after doing I don't know what... perhaps toggling the Display res a few ties until it "feels" safe about a certain rez???

How to change the resolution of printing from a picture in ipad ?

Hello,
Can anyone help me about the subject ?
When you print a picture from the Ipad It only prints into small (13x18cm) in A4 page.
I need to print some pages of magazine so I take a picture and then print... But it is in a small size like picture paper...
How know the solution ?
Thank you
Lotfi
This question was solved.
View Solution.

Hello lotfi070,
You may try downloading the HP ePrint home & biz app from the App Store. It provides a few more options when trying to print photos from an iPhone, iPad, or iPod. You should be able to specify paper size, paper type, picture size, and color options.
Hope this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How do I change the resolution of a scanned document/photo on CC568A?

Its a Photosmart 7520 Series printer.
The scanned documents are way too large to email, and I can't find anywhere on the printer or online on how to change the resolution to shrink the file size.
Thank you!

Hi @JeffJohnson,
I see that you are having issues emailing the scans. I can help you.
How are you scanning the emails? (from the computer or the printer)
If you are scanning from the computer to email, you can reduce your file size by:
1. Reducing the scan resolution. Change the dpi.
2. Scan your document in black/white or grayscale.
Be aware, that this will change the quality of the scan.
Here is a document for scanning to email from the printer. I don't believe there are any settings to change the size.
How to Scan: From the Control Panel (Including Scan to Email, to a USB Drive, and to a Memory Card).
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do you change the resolution?

lol, sorry, but I don't know how to change the resolution!

To change your screen resolution
Open Display in Control Panel.
On the Settings tab, under Screen resolution, drag the slider, and then click Apply.

How to resize and change the resolution of a batch of photos using Automator

I searched for a long time tonight looking for the answer to this (seemingly) simple question:
How do I use Automator to scale and change the resolution of a batch of images?
It was not so simple.
Links to this question:
https://discussions.apple.com/message/12341246#12341246
https://discussions.apple.com/message/12342026#12342026
https://discussions.apple.com/message/5785047#5785047
https://discussions.apple.com/message/1173358#1173358
https://discussions.apple.com/message/5641853#5641853
https://discussions.apple.com/message/3207516#3207516
These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
You can actually manage this in Automator.
Here are the steps that worked for me:
Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
Step 1 is Copy Finder Items
My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
<== You'll have this guy soon!
As a result - I want to copy the originals to my computer as step 1. I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
Step 2 is the Scale Images action - you can search the library for this and find it quickly. For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog. Change this value to whatever you wish.
Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
#bin/bash
for f in "$@"
do
/usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
done
Save this application (I named mine "Format Photos")
Place the application inside the target folder where you want the images to end up. I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there. I select my images as I mentioned and drag them on top of this app. The app copies the originals and the conversions into the folder.
NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size... This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData. However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original). My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb. Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood. If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle.

PPI is pixels per inch of the image. It is difficult to increase resolution as you are trying to add data that is not there.
But for printing purposes what you want is dpi or dots per inch.
The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

Adobe Reader for iOS doesn't set the default email address when you email a PDF.
It's found in the Settings app:
Settings > Mail, Contacts, Calendars > Mail > Default Account

How to change the dimensions of a display (not resolution)?

I use a 27" iMac with a 27" Dell Monitor (1920x1080). Physically, the displays are nearly the same size, even though the resolutions are very different. This means that in 'Displays > Arrangement', the Dell monitor appears much smaller than the iMac monitor. So even though the displays are almost exactly the same height, I have to choose only a certain amount of the iMac screen that will allow my mouse pointer to move over to the Dell screen.
What I would like to do, if possible, is correct the 'size' of the Dell screen, and fix how my mouse can move between the 2 displays. Anyone know how I can do that? Thanks!
FYI: Monitor is connected via MiniDisplayPort to DVI adapter cable. Monitor is a Dell s2740L, and the iMac recognizes it as such.

Maybe there is a way; I don't know of one as the size of the display is made up of individual pixels, i.e. 1920x1080 means there are 1920 pixels horizontally and 1080 vertically. Unless you change the resolution, you can't change the display. Your 27" iMac most likely has a native resolution of 2560x1440, so there are a lot more pixels there (and they are much smaller in order to fit within the same physical space, so the image is crisper and better).

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
 fp_docparams TYPE sfpdocparams,
 fp_outputparams TYPE sfpoutputparams,
 it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
 CHANGING
 ie_outputparams = fp_outputparams
 EXCEPTIONS
 cancel = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
 EXPORTING
 i_name = 'ZAF_FS_1'
 IMPORTING
 e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
 EXPORTING
 /1bcdwb/docparams = fp_docparams
 it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR.

How to change the page break in adobe forms

Does anyone know how to change the page break on an adobe form? I'm hoping it will be the same way you change the page view in excel.
Can anyone help?
Thank you in advance,
Priscilla

HI
 YOU CAN USE THE FOLLOWING SYSTEM FIELDS OF SMARTFORMS FOR THE MENTIONED PURPOSE
&SFSY-PAGE& 
 Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
 Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output
&SFSY-JOBPAGES& 
 Contains the total page number of all forms in the currently processed print request.
REGARDS
ANOOP

How to change the resolution af adobe captivate

Similar Messages

Maybe you are looking for