How to change timezone in B2B to reflect date fields per local time in DB

Hi,
I am in EST zone and I could see the data in database with date columns having time in PST. One of my transaction just errorred , I could see from B2B user interface tool error report message date time as 2:14 EST, while when I check the database values from TOAD the value is 11:14, which indicates there is some setup which might have caused to update Pacific Time in the database, I am not sure what could be the setup. Can anyone please indicate or provide inputs on what could be the cause and how to set up the application so that the date type data is updated with local time in database.
Thanks
Sachin Sutar

Hi Sachin,
We store the message using the database time. It seems like the database time zone is set to PST. To change it to a different time zone, please follow the instructions on this link:
http://www.oracle.com/technology/products/oracle9i/daily/may02.html
Hope this helps,
Eng

Similar Messages

How to change bucket capacity for a certain date range (duration)?

Hi,
I need to update the bucket capacities of Resource at Vendor location in APO live cache for a particular period using BAPI_RSSRVAPS_CHANGEMULTI.
Here I am executing BAPI by passing -
Import Parameters:
LOGICAL_SYSTEM
COMMIT_CONTROL
PLANNING_VERSION
Tables:
RESOURCE_HEAD
(RESOURCE = Resource " Test123
LOCATION = Vendor Number/Loctaion
CAPACITY_A = 5000.000
NUM_OF_PERIODS = 001
PERIOD = 02 " Day Wise
UTIL_BUCKET = 100.000 )
RESOURCE_HEAD_X
(All corresponding fields X)
RESOURCE_QUANMODEL
(RESOURCE = Resource " Test123
VERSION = 01
ENDDA = 02/25/2011
BEGDA = 02/21/2011
QUANMODEL = 8000 )
RESOURCE_QUANMODEL_X
(All corresponding fields X)
[ I have a capacity variance:
Resource = Test123; Capacity Varient = 01; Valid From = 02/21/2011
Valid To = 02/25/2011; Bucket Util Rate = 100.000; Qty/Rate definition = 8000 ]
Now, while I execute /SAPAPO/RES01 to display Capacity for that resource-Location-PlanningVersion, Its showing that 'Bucket Capacity' and 'SNP Bucket Capacity' get changed into 5000. But this change happend for all the days and not only for the duration I passed into Bapi (From BEGDA to ENDDA).
How to change bucket capacity for a certain date range (duration)? Any help please.
Thanks
Roy

I did it myself. Hence closing the thread.
Solution:
1. Get RESUID from /SAPAPO/RESKEY table by passing Resource as NAME.
2. Call Function Module /SAPAPO/CRES_QUANPROF_UPDATE
3. Call Function Module /SAPAPO/CRES_SAVE_FROM_BT
For further help, change manually a single record in the 'capacity profile' in TXN /SAPAPO/RES01 and debug both the FM mentioned above.
BR
Roy

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

How to change specified hierachy node to master data attribute automatic?

Dear BW experts:
How to change specified hierachy node to master data attribute automatically? I have a retail business: I have a fixed material group hierachy in R3 Retail ,Now I will extract the material group hierachy ,my goal is that the specified material group hierachy node as dimension in query ,not show hierachy level,So I need change specified material group hierachy node to material group's attribute.
Anybody solve the requests?
Thank you for your help in advance !

If I understand your requirement correctly, you need to have a specific Material Group Hierarchy level (Say Level 2) to be an attribute of Material Group. Usually, this level represents a Brand or Segment, or something with specific meaning.
If this is correct, here are the things you need to do:
1) Create an InfoOnject for this specific attribute representing the specified hierarchy level
2) Add this InfoObject to Material Group as an navigational attribute
3) Select this navigational attribute in your InfoProvider
4) Create a transformation routine for this navigational attribute in Material Group Transformation so that the specified hierarchy level for Material Group will be found and populated. The detail of this routine will depend on your specific requirement. Also, you have to make sure Material Group Hierarchy is updated before Material Group attributes are loaded. If you are not family with ABAP, please ask an ABAPer to help you for the Transformation Routine.
5) Include this navigational attribute in your query along with other required InfoObjects.
Hope this help and good luck!
Bill

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How to change the text of a user defined field in dynamic selections?

Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
Ven

Madhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Change a numeric value to a date field

If someone could please help I would appreciate to know how to change a numeric value to date value. Example: I ave a number 20080312 and I would likefor the field to read as follows in a date format, 03/12/08. i am not sure how to convert.
Thanks Jim Dyer

Hi Use,
CDate("20080312");
Regards,
Vinay

Is it possible to change the way SAP stores a DATE field ?

Hi,
I have a scenario here where I have to read from a file and then upload the contents to a custom table.
The file is comprised of several lines, each line being formatted to accomodate several fields, according to their length specifications. It's the "standard" string style to import/export files from one system to another.
My question is: one of these fields is a date field, and I am required to order the table, afterwards, by this date field. I notice it comes as DDMMYYYY, and my SORT is not working. If I use, on the other hand, dates in YYYYMMDD format, the SORT works perfectly.
Does SAP expects the date to come as YYYYMMDD ? Is there a way I can change this "default" format ?
Thanks,
Avraham

Hi,
Yes, SAP expects the date to come as YYYYMMDD, this is the internal format.
I am not sure you will be able to change the default DATS format to something else.
Other internal date format : GDATU as in table TCURF.
Sugestion : use offsets to convert original date to internal date format and keep doing your SORT as you already did.
Hope this will help you find de good solution.
Issa

How to add 5 hours to an existing date field in the database

Have a date field 2013-11-21 00:00:00.000 but need to add 5 hours to it to make it 2013-11-21 05:00:00.000.
Please how can I do this?
Mijecarr

Fantastic...
DATEADD (hour , 5 , Cast(ActivationDate as datetime) ) worked!!!
Thank you very much
Mijecarr

[Forum FAQ] How do I have Invoke-SqlCmd return a date value without adding time

Introduction
A select statement executed from Invoke-SqlCmd returns a value from a Date column, the value has "12:00:00 AM" appended. The same select statement executed within SQL Server Management Studio displays the date properly without any time formatting.
Sample data is as follows:
How to have Invoke-SqlCmd return Date values without adding time for multiple Date type columns and pipe the output into CSV file?
Solution
In SQL Server 2012 or onwards, use the FORMAT() function to convert datetime values to date format when executing query from Invoke-SqlCmd. In earlier versions such as SQL Server 2008 R2, use the traditional CONVERT() function to format datetime values to
different date formats(yyyy.mm.dd, mm/dd/yyyy, etc) when executing query from Invoke-SqlCmd. Then pipe the output of SQL query result into CSV file by specifying export-csv parameter. An example is as follows.
Create a table named “Test_invokesqlcmd” that contains Date type columns in SQL Server.
USE Test
Go
CREATE TABLE [dbo].[Test_invokesqlcmd](
   [id] [int] NOT NULL,
   [name] [varchar](20) NULL,
   [test1] [date] NULL,
   [test2] [date] NULL
) ON [PRIMARY]
GO
insert into [dbo].[Test_invokesqlcmd]
values(1,'David','2014-10-15','2015-01-07'),(2,'Jane','2011-08-05','2012-11-7'),(3,'Crystal','2013-09-15','2010-02-24')
Define a query string, execute it from Invoke-SqlCmd and save the query result to a CSV file.
Scripts for SQL Server 2012:
$query1 = @"
    use Test;
    SELECT FORMAT(test1,'d') as newtest1, FORMAT(test2,'d') as newtest2 from dbo.Test_invokesqlcmd
write-host $query1
Invoke-Sqlcmd -Query $query1 -ServerInstance localhost | export-csv -notypeinformation -path c:\Files\test.csv
Scripts for SQL Server 2008 R2:
$query2 = @"
    Use Test;
    SELECT CONVERT(varchar, test1, 102) as newtest1,CONVERT(varchar, test2, 102) as newtest2
    FROM dbo. Test_invokesqlcmd
write-host $query2
Invoke-Sqlcmd -Query $query2 -ServerInstance localhost | export-csv -notypeinformation -path c:\Files\test.csv
Check the results in SQL Server PowerShell window and csv file.
SQL Server 2012:
SQL Server 2008 R2:
Reference
Using the Invoke-Sqlcmd cmdlet
SQL Server Functions that helps to convert date and time values to and from string literals and other date and time formats
Applies to
SQL Server 2014
SQL Server 2012
SQL Server 2008 R2
SQL Server 2008
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Cross posted. More appropriate in JSF forum so continue conversation there.
http://forum.java.sun.com/thread.jspa?threadID=717292&messageID=4142615#4142615

How to Change TimeZones from Personalize iView

Hi All,
In my Masthead, i need to Display the Country name and the Time, user is going to chnage the time zone and Country from Personalize iview User Profile, according to that the respective time is going to display it on Masthead part.
Now my Question, If user is Change the Timezone & Country in the User profile, how it is going to reflect on Masthead area.
Thanks In Advance
Krishna Ganesh

Hi Michael,
In the Masthead JSP it self, we are adding jsp scriptlets and html Div Elements to display the time on the Masthead. Currently i am able to display the server time with normal Java API.
Now i am going to display 5 timezones in a Iview, that iview is going to add to user's HomePage(User Choice).
Thanks
Ganesh

How to change the transmission rate of data flow in producer/ consumer pattern

Hi All
I am new to labview and trying to design a application to transfer image data in different rates, that means I can change the transfer rate in the transmission process. In fact,I refer to the the Queue Basic.vi to achieve this function by Changing the delay value of dequeue and enqueue.The program is divided into three parts:
The first part is the sender in vc used to split and send image data.Data size is 226kb and each time we send a 1kb packet;
The second is labview rate-change part，use producer/ consumer pattern and queue to transfer data;
The third one is the receiver in vc,receive data in sequence and synthetic images.
The entire transfer process is: image data was sent from the sender to producer loop through DLL, then enqueue--dequeue in consumer loop--DLL--receiver.The sleep time in vc sender is equal to the delay value in producer loop and this makes it look like the data generated as in the loop.
Now this is where my dilemma is：
When transferring data, if the producer loop and consumer loop delay value are equal(both 20ms), I can see image synthesis at a constant speed and no data lose; if I change the consumer loop delay value and make it greater than the producer delay(one is still 20ms and another is 50ms),that means receive in a lower rate and store data in queue. I can see Elements in Queue
increase but the image data randomly lost, and the image synthesis speed is not reduced.
My question is why image data loss and I can't see the image synthesis speed reduced when change the delay value in consumer loop?
Do anyone know how to solve the problem? Are there any examples I can refer to? Any suggestions are greatly appreciated!
Attachments:
image1.JPG ‏56 KB

thisoldman,
I don't have '/usr/lib/modules/3.17.3-1-ARCH/build/Documentation/VGA-softcursor.txt' on my file system. Does it contain the info about changing the blinking speed?
P.S. The other two links I found yet before starting this thread. I only found in them the recommendations about changing "the color and shape of the cursor and turning blinking on/off" (as I mentioned in the original question). Did I miss the info about the blinking speed?
PPS: I found the vga-softcursor.txt here: https://www.kernel.org/doc/Documentatio … cursor.txt
But that file doesn't tell about changing the blink rate either.
Last edited by nbd (2014-11-23 20:55:41)

How to change timezone in B2B to reflect date fields per local time in DB

Similar Messages

Maybe you are looking for