? How to compare whats in my Micro to what's in my Rhapsody Libra
Hi, I just got my Micro Zen this weekend at Wallyworld. And I love it.
I am currently using the Rhapsody to go subscription and it says I have some 827 tracks in it right now. I wasn't thinking when I first started using my Micro (first time MP3 owner) and didn't transfer over everything at the same time.
So now- I have 827 in my Rhapsody library, and only about 400 in my Micro.
Is there any way other than going through the Micro's track menu and comparing it to my Rhapsody library to tell what I need to transfer still from Rhapsody?
I tried to search out this information using the search feature, but I guess I didn't phrase it well enough, or put in the right words, because I couldn't find any answers, that is, if there is one. Maybe I will just have to sit down and figure it out by comparing screens, but I really hope not!
Thank You very much for any help you can give- DeeDeesBubbles
Thank You! I actually read your response the same day, but didn't get logged in to respond. I ended up doing just that- transfering them all- but now am having new problems with the player that I guess I'll be making a new post about (
Similar Messages
-
How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!
See this -> http://support.apple.com/kb/HT2727
-
How to compare dates in Crystal Reports 2008
Hello,
I cannot figure out how to compare the dates in the Crystal reports.
I need all dates that are in the future to be displayed with the green font.
So in the formula for the font for this texbox I've tried to use different
formulas like:
If DateDiff("d", CurrentDate, {DevelopmentTracking_SELECT.Anticipated}) > 1
Then
crGreen
or
If {DevelopmentTracking_SELECT.Anticipated} > CurrentDate Then
crGreen
(where DevelopmentTracking_SELECT is the stored procedure, and Anticipated
is a date field).
None of them worked. All dates are treated like they were in the past
comparing to the CurrentDate. If I reverse these formulas like:
If {DevelopmentTracking_SELECT.Anticipated} < CurrentDate Then
crGreen
then all dates turn to green, otherwise they always stay black.
What could be a problem here?
I would appreciate your help.
Thank you.OK, got it, thank you. It worked.
However, I also need to use another field value which is not on the report, like this:
If CurrentFieldValue < CurrentDate And {DevelopmentTracking_SELECT.Completed} = False Then
crRed
DevelopmentTracking_SELECT.Completed is not on the report.
Is it possible to use it with the cross-tab? -
How to compare two rows in PL/SQL?
Hi All,
How to compare two rows in PL/SQL? Is there any method that I can use instead of comparing them column by column?
Any feedback would be highly appreciated.PhoenixBai wrote:
Hi All,
How to compare two rows in PL/SQL? Is there any method that I can use instead of comparing them column by column?What "rows" are you referring to?
If you're talking of rows within a PL/SQL associative array there are techniques as described in the documentation... e.g.
SQL> ed
Wrote file afiedt.buf
1 declare
2 type v1 is table of number;
3 r1 v1 := v1(1,2,4);
4 r2 v1 := v1(1,2,3);
5 begin
6 if r1 MULTISET EXCEPT DISTINCT r2 = v1() then
7 dbms_output.put_line('Same');
8 else
9 dbms_output.put_line('Different');
10 end if;
11* end;
SQL> /
Different
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 declare
2 type v1 is table of number;
3 r1 v1 := v1(1,2,3);
4 r2 v1 := v1(1,2,3);
5 begin
6 if r1 MULTISET EXCEPT DISTINCT r2 = v1() then
7 dbms_output.put_line('Same');
8 else
9 dbms_output.put_line('Different');
10 end if;
11* end;
SQL> /
Same
PL/SQL procedure successfully completed.
SQL>If you're talking about rows on a table then you can use the MINUS set operator to find the rows that differ between two sets of data...
SQL> select * from emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-1980 00:00:00 800 20
7499 ALLEN SALESMAN 7698 20-FEB-1981 00:00:00 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-1981 00:00:00 1250 500 30
7566 JONES MANAGER 7839 02-APR-1981 00:00:00 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-1981 00:00:00 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-1981 00:00:00 2850 30
7782 CLARK MANAGER 7839 09-JUN-1981 00:00:00 2450 10
7788 SCOTT ANALYST 7566 19-APR-1987 00:00:00 3000 20
7839 KING PRESIDENT 17-NOV-1981 00:00:00 5000 10
7844 TURNER SALESMAN 7698 08-SEP-1981 00:00:00 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-1987 00:00:00 1100 20
7900 JAMES CLERK 7698 03-DEC-1981 00:00:00 950 30
7902 FORD ANALYST 7566 03-DEC-1981 00:00:00 3000 20
7934 MILLER CLERK 7782 23-JAN-1982 00:00:00 1300 10
14 rows selected.
SQL> select * from emp2;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7521 WARD SALESMAN 7698 22-FEB-1981 00:00:00 1250 500 30
7566 JONES MANAGER 7839 02-APR-1981 00:00:00 2975 20
7782 CLARK MANAGER 7839 09-JUN-1981 00:00:00 2450 10
7788 SCOTT ANALYST 7566 19-APR-1987 00:00:00 3000 20
7839 KING PRESIDENT 17-NOV-1981 00:00:00 5000 10
7900 JAMES CLERK 7698 03-DEC-1981 00:00:00 950 30
7934 MILLER CLERK 7782 23-JAN-1982 00:00:00 1300 10
7 rows selected.
SQL> select * from emp
2 minus
3 select * from emp2;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-1980 00:00:00 800 20
7499 ALLEN SALESMAN 7698 20-FEB-1981 00:00:00 1600 300 30
7654 MARTIN SALESMAN 7698 28-SEP-1981 00:00:00 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-1981 00:00:00 2850 30
7844 TURNER SALESMAN 7698 08-SEP-1981 00:00:00 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-1987 00:00:00 1100 20
7902 FORD ANALYST 7566 03-DEC-1981 00:00:00 3000 20
7 rows selected.If you actually need to know what columns data is different on "non-matching" rows (based on your primary key) then you'll have to compare column by column. -
How to compare, current value in :block.text_item with the database value
Hi
Could you please tell me
How to compare the current value in :block.text_item with the corresponding database column value.
I am using forms 10g
There is block and there is an text Item in that block.
When I run the form and query the block (tabular), the :block.text_item shows me, whatever value there in the database.
Now I add some value in the :block.text_item to the existing value.
now
the :block.text_item contains old+ new added value
whereas
the database table contains 'old' value
Now on a button click , I want to find out what is the value that I have added
Could you please tell me, is it possible without writing a select query?Hello,
Now on a button click , I want to find out what is the value that I have addedSo you mean always user will add value in the existing value. Because this way will fail in one case. Let say
Value in Database is = ABCD
User opened the form and he removed the D and write E and now value is ABCE and length is still same 4. So, there is no addition.
Anyway you can know the database value at runtime there is one property for item called DATABASE_VALUE. It gives the value which is in database while you are running the form before save. and you can use like this..
Trigger = WHEN-MOUSE-DOUBLE-CLICK on item level
DECLARE
vItemValue DATATYPE; -- Set the data type according to your desired field.
vValueAdded DATATYPE; -- Set the data type according to your desired field.
BEGIN
vItemValue:=GET_ITEM_PROPERTY('ITEM_NAME',DATABASE_VALUE); -- It will return you the database value in vItemValue variable.
IF LENGTH(vItemValue)>LENGTH(:FORM_ITEM_NAME) THEN -- It mean something change or added
vValueAdded:=SUBSTR(:FORM_ITEM_NAME,LENGTH(vItemValue)+1);
MESSAGE('Added value is : '||vValueAdded); -- It will show you the added value.
END IF;
-- now suppose you want to show the old and new value in message not the added one
-- Then no need of IF condition. You can just use message like this
-- And i would prefer to use like this way
MESSAGE('Old Value : '||vItemValue||' New Value - '||:FORM_ITEM_NAME);
MESSAGE('Old Value : '||vItemValue||' New Value - '||:FORM_ITEM_NAME);
END;Hope it is clear.
-Ammad -
How to compare 2 different versions of a document in Lion?
Supported applications in Lion reduntantly autosave several versions of a document, even if the user does not want to.
Does anybody know how to compare two arbitrary versions and see in what they differ (kind of the old good diff command in Unix)?
Thank youIf yo will click on the name/title of the document (there'll be a small arrow on the right of it), you will get this menu:
You can choose to browse all versions.... -
How to compare 2 columns in a cross tab
Hi,
I need some idea on how to compare 2 columns in a cross tab in Deski.
Original Table is like this:
Type..............ID...........Name
Type1............1............BO1
Type1............2............BO1
Type1............3............BO2
Type2............1............BO7
Type2............2............ --
Type2............3............BO5
I did Slice and dice to the original table and now it looks like a cross tab
......................1..............2............3
Type1.........BO1....... BO1.......BO2
Type2.........BO7........-- ...........BO5
Now I want to compare column 1&2, 1&3 and put these values in new columns after column 3 for Type1 & Type2
Does anyone has any idea on this?
Thanks,1. Right click your table
2. Select Calculations -> Count
3. It will insert a new column. Edit this new column formula and substitute it with thos other formula:
=If ( <Name> Where (<ID>=1) = <Name> Where (<ID>=2) ) Then "Column 1 equal to column 2" Else "They're not Equal"
4.Put this title in that column's header:
Column 1 vs Column 2
5. Repeat steps for comparison between 1 and 3, just that this is the formula you have to use:
=If ( <Name> Where (<ID>=1) = <Name> Where (<ID>=3) ) Then "Column 2 equal to column 3" Else "They're not Equal"
Note: Apply necessary changes depending on what you need.
Edited by: PadawanGirl on Jul 4, 2011 10:32 PM -
How to compare table data and table field
Hi buddy,
I have some question about how to compare table data and table field.
1. I know there is one method: CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1. but when I try to use this in main program it will dump.
CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
LINE = A1
TABLE = B ).
Is there any method or FM can be used to compare the table data ?
2. I also want to compare two table field , try to find out the different. How to realize this.
Thank you for your sincerely answer.Hi Zongjie,
What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
The question 2, seems no standard FM available here.
Loop A into wa_A.
Loop B into wa_B.
if wa_A-field1 eq wa_B-field1.
endif.
if wa_A-field2 eq wa_B-field2.
endif.
endloop.
endloop.
regards,
Archer -
How to Compare 2 internal table data...
Hi Experts,
i ve 2 internal tables, both contains NRIC numbers...
now i want to compare whether the both table data is same or not?
i tried like
if itab1[] = itab2[].
but its not working...
how 2 compare both tables are having matching data r not?
Thanks in Advance,
sudeer.Hi Vijay,
thanks for ur replay...
i ve done same thing what u ve given, but its not working........
but both tables having same data....no doubt on that...
my require ment is i ve contants in both tables..
i want 2 check if both should have same no of records and contant also should be same... -
How to compare the same array?
Hello,
The question not how to compare arrays.
I have a method that gives results of an array type int.
for(......){
int [] arrayFunc(int [] input)
return arrayOut;
}I want to compare those arrayOut arrays. I need to find a way to save the first output and then compare it with the newest output. Where do I have to put the temp array to temporary save the array? What should happen if I want to keep track of the results and get comparisons of first, second, third output?
ThanksStill not 100% sure but I try and help. What you need to do is have two references. After you have generated a result compare it to the last result. After the comparison you need to assign the current result to the last result and then go around the loop again to generate a new current result. Below is some code that uses plain ints but I hope it illustrates what I am trying to explain.
import java.util.Scanner;
class ComparingNumbers {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
int current;
System.out.print("Number: ");
int last = scanner.nextInt();
scanner.nextLine();
for(int index = 0; index < 10; index++) {
System.out.print("Number: ");
current = scanner.nextInt();
scanner.nextLine();
System.out.println("Difference is " + Math.abs(current - last));
last = current;
} -
How to compare two stored procedure
I have two oracle database and each database have stored procedure
How to compare two stored procedure?
What is the command to compare the stored procedure?select line, text
from user_source
where name='....'
minus
select line, text
from user_source
where name='....'
should do nicely.
Or: get the procedure text to a file using dbms_metadata.get_ddl (9i and higher) and run diff (Unix) or fc (Windhoze) on it.
You are a bit scarce on details.
Better still: implement source control.
Sybrand Bakker
Senior Oracle D.B.A. -
Hi all,
How to compare two IDoc's. If the both the IDocs are are of same type, i want to distinguish the data in those two IDocs.
Thank you in Advance
Regards
HarshaHi Harsha,
Transaction WE05 will help you out.You should first know some details like the
iDoc type, partner, the date/time and maybe the iDoc #. There can be many iDocs
generated/processed per day and without having some info to start with,
one will never find anything useful. Filter what you can, and then
navigate in the left hand frame/double click on the results lines in the
right hand frame to drill down. Eventually you will see the single iDoc
with all the many 'segments' available. Expand the 'data records'
branch (and sub-branches) to see each 'segment' and find the data fields
& values (these will appear in the lower right hand frame).
Reward points if helpful..
Regards,
Goutham. -
Can anybody tell how to compare two documents with two pointers controlled with the same mouse
can anybody tell how to compare two documents with two pointers controlled with the same mouse ??
I saw what I need but in a game to find the differences between two photos (two screens, two pointers controlled by one mouse), and I need a program to make the same thing (compare a chosen files)
-
How to determine what Index is required by a query ?
Hi all,
In our application, we create some complex View with complex query.
The question is : How to determine what Index is required by the query ?
I try using SQL Tuning Advisor, but it seems I can only use it After running TOP SQL.
Is there aniway to determine the Index even Before the query under heavy load/ top sql ?
Thank you very much,
xtantoYou can run your explain plan to check the table access path. You can create an index and see if the optimizer is using the index. Then compare the costs. Creating index will help only in some occassion and you need to provide complete details of the requirement to come to a conclusion of which type of INDEX as well. In some occassions, B*Tree index is useful, in few DW applications, bitmap will work efficiently with columns of low cardinality.
So it is again the task for you to look into this.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/toc.htm
Cheers
Sarma. -
How to compare LabVIEW executable file?
I have a labview executable file that I build 2 years ago, and with the same source code, I build a new executable file. Does anybody know how to compare the 2 executables?
Well if you built from the same source the functionality should be the same. But if you build the same source with different versions of LabVIEW then you never know. Maybe the new version exposes a hidden bug in your code or fixes one that you depended on.
There is no way to do what you want by examining the bytes in the exe. You have to just do testing. You could either do this manually or automate it using the Unit Test Framework. There is also VI Tester by JKI.
=====================
LabVIEW 2012
Maybe you are looking for
-
Need help to develop CMDB using Apex
Hi, We have a large number of servers, databases, environments, applications, etc for which we have planned to create a repository. Hence we need to develop a CMDB for the same. I have gone through the example tutorials related to Apex. However, I ha
-
How to lookup an EJB from JSP on a Remote Server in JES2005Q4
Hi, I am having two different domain (domain1,domain2) respectvely. My ABC.ear j2eee application is deployed on domain2 and its iiop port is 33703.In domain1 i have xyz.war (web application) and it's IIOP port is 3700 .In xyz.war i am having CallEJB.
-
What's it take to get LabView up and running?
Hello. I'm new to LabView and in the process of learning what I can about it by working through a couple of training books. Anyway, what do I need to get LabView 6.1 to control Agilent and Anritsu test equipment -- specifically voltage supplies, a ne
-
"localdisk" icon shows up in itunes instead of my ipod mini
when i plug my ipod mini in, itunes does not recognize it. instead of my ipod mini icon showing up, an ipod icon that says "localdisk" appears in itunes. i have tried resetting it and that doesn't work. i have also tried re-installing itunes and that
-
Can't update to Mavericks, says my hard drive is backup
When trying to update to Mavericks, the system won't do it and only says that the selected drive is used for time machine backups. This is my hard drive, and I don't use it for time machine backups.