How to compress the requests selectively
Hi Gurus,
i have 4 requests , i would like to compress the 2dn one
if i compress 2nd request 00 to 2 request will be compressed, but i don't want like that i want compress the
2nd requet only not from 00 to 2
how can i do that ,
thanks
Anil
hi Shreya,
The latest requests are related to Inverty management i
i.e BF(goods movements) and UM(Stock revalution)
i have to compress these(BFandUM) without marker update
if i compress the requests, it will compress 00 to the latest request,
this nomarker update will effect the older request, why because they are not compressed yet.
wat i have to doo,
Anil
Similar Messages
-
How to create the request for change of selection text into other language.
Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
ThanksHello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved. -
When do we compress the request in cube. ?
Hello all,
We have been live for a few months now. After how many days/weeks/months should we compress the request in cube. ?How often do we have to compress the data in the cube.
I know once compress than we cannot delete the data by request but we there is an issue and we need to delete data completely from the cube that is possible right ?
Thanks in advanceHow often Compression needs to be done depends on the volume of data that is loaded everyday. Unless the volume of records loaded everyday is unusually high, doing compression once a week might be good enough.
Also you are right abt losing the ability to delete by request in the infocube after compressing the request. But we dont necessarily have to delete the whole cube incase of issues. There is always the option of doing 'SELECTIVE DELETION'.
Next, when doing the compression you have an option of mentioning the date range. Choose the option of compressing requests that are older than 4 days (arbitrary) to have a buffer for deleting the request incase of issues.
Hope this helps! -
How to delete the request in se10
Hi Experts,
How to delete the request in se10 ....plz explain
Regards
VenkatHi,
Go to SE10,select the request which you wnat to delete.You will find a delete icon on the top.Select it.
This will delete the request.
Make sure that this request is the one which is under ur ID.If you want to delete the request which is under other ID,it wont allow to delete.
Thanks & Regards,
Suchitra.V -
Unable to Compress the request of a Cube
Hi All,
I was trying to compress the cube data,At one request I got stuck. When ever I try to compress that request manually, but it is unable to compress the request and sends the following job logs
Job started
Step 001 started (program RSCOMP1, variant &0000000000190, user ID XXXXXX0006)
Performing check and potential update for status control table
No requests needing to be aggregated have been found in InfoCube 0XX_X01
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
After further analysis, I observed the request which I am compressing , has an selective deletion.Since its is 2year old data I would like to compress the data,please suggest is it possible to compress,If the request has selective deletion.
please suggest.
Thanks & Regards,
AbdulHi Abdul,
Check that, if the cube that is being compressed feeds the data to a different InfoProvider, if yes then complete that laod first and then do the compression. this might be the reason sometimes. if the cube is not feeding anything currently try compressing the request again.
In some cases ,when the compression is manually performed (in the tab collapse of the cube) no compression would be done. In those cases you can try creating a process chain with only the compression step. This often solves the problem.
If both the above process don't solve your problem,
Try the SAP note :407230 (such problems occure after installing SP15.)
Regards,
Sudheer. -
How to unlock the request for a report and add the same query to new reques
hi,
how to unlock the request for a and add the same query to new requesYou can unlock in SE03 tcode.
Goto tcode SE01, give the transport number --> display --> double click on the transport --> in the next screen select all the elements --> delete --> save.
To attach it to another transport, In RSA1, click on transport connection> Choose Object types> query elements --> here you can find your query/ or you can search, which you can drag to right and attach to the transport (using truck button). -
I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.
A couple of suggestions that may help:
- Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
- You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left. -
Compress the Request with Zero Elimination
I delta load the transaction data into Infocube by InfoPackage and compress the Request ID manually without select 'with Zero Elimination'. Now I wanna Compress the request ID with Zero Elimination again. Could you give me some hits on that. Many Thanks .
hi,
There're two programs that work for me.
1. RSCDS_MERGE_DUPL_REF_POINTS - this is to actually compress the records.
2. RSCDS_NULLELIM : - To remove the records with 0 value i.e. null Elimination
Although, SAP doesn't recommend using them if your compression is working fine.
You may want to try them in your non-production system first.
-RMP -
Compress the requests without opening PRD client
Hello experts,
Everytime we take INIT loads into 0IC_C03, we have to compress the BX,BF & UM requests. But it is only possible after opening the PRD client.
Can anyone guide how to compress these requests without opening client? Is there any special auth. required for this?
Please reply.
All answers will be rewarded.
Regards,
Roy.Roy,
When you open the client and compress - are you asked for any request.
What I think is happening is that there might be some tables which have entries being deleted and recreated. For deleting the entry you will have to open the client if the table is not maintainable.
As a process if no request is triggered then it is a table issue - check if you can set any namespace to modifiable and resolve this or if you are getting a request then you will have to open the client.
Arun -
How to avoid the user selecting a different path in my installer
Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-JoeBen64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe -
How to get the previoulsy selected value in a combobox
How to get the previoulsy selected value in a combobox. i WANT the current and the previously selected value of the combobox.
Just add to combobox ItemListener. When item is changing in itemStateChanged arrives 2 events. ItemEvent.DESELECTED and ItemEvent.SELECTED with corresponding item's values. Just write something like this:
comboBox.addItemListener(new ItemListener() {
Object prevValue;
public void itemStateChanged(ItemEvent e) {
if (e.getStateChange() == ItemEvent.SELECTED) {
//do what you need with prevValue here
} else {
prevValue = e.getItem();
}); -
How to get the old selection in ListSelectionListener valueChanged() method
Hi,
Is anyone know how to get the old selection index/value in the ListSelectionListener valueChanged() method? The list.selectedValue() always return the same value which is the new selection. The ListSelectionEvent.getFirstIndex() and getLastIndex are always firstIndex <= lastIndex so that you cant' tell which one is the old selection.
Please help and thanks!Just test the two indexes (first and last): if the corresponding row is selected, then the other is unselected. That gives you the old (unselected) and new (selected) item.
Of course, I have supposed that you were using a SINGLE_SELECTION model...
Hope this helped,
Regards. -
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
RegardsYou need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh -
How to read the Lead Selection in Search UIBB
Hello,
I have a Search UIBB implementation with the list from Search UIBB.
When the user double click any line in the List we want to call another program. Not sure how to read the Lead selection. I see the event ID FPM_RESULT_LEAD_SEL in Process_Event method and GET_DATA method but not sure how to get the actual line.
Thanks in advance for any help.
Regards,
PKHi ,
method IF_FPM_GUIBB_SEARCH~PROCESS_EVENT.
CASE IO_EVENT->MV_EVENT_ID.
WHEN IF_FPM_GUIBB_SEARCH=>FPM_RESULT_LEAD_SEL.
READ TABLE IT_RESULT_LIST into IS_RESULT_LIST index IV_LEAD_INDEX.
ENDCASE.
Where IT_RESULT_LIST -> is the internal table of ET_RESULT_LIST( This can be declared in attributes section and assigned value in GET_DATA method )
IS_RESULT_LIST-> is a structure of type table IT_RESULT_LIST.
IV_LEAD_INDEX has to be created at attributes section and the value of the selected row of type I can be assigned in IF_FPM_GUIBB_SEARCH~FLUSH method for the same event.
Regards,
Harsha -
How to get the default selection color from JTable
Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-JennyThe windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );
Maybe you are looking for
-
While creating a new email, various portion of the mail will appear in the trash box.
after creating a new email and send sucessfully, breakdown of the full content in the mail will appear in the trash box without my intention. The breakdown were in seperate uncompleted mail/mails depending on the lenght of the email. Everytime afte
-
Plant Determination for Third Party Material as Child Item in Sales Order
Hi All, We have an issue with the Plant Determination for Third Party Material as Child Item in a Sales Order. Even when a Delivering Plant is maintained for the child item which is a Third Party Material, the plant of the Parent Item is only populat
-
10.1.3.4 - How to access custom java methods in worklist ?
We want to invoke a custom java method inside of worklist, when the file attachments are added to the worklist. We are planning to modify the auto-generated jsp page to do the same. We have created the custom jar files, but am not sure where to deplo
-
I've used Premiere Pro as a playback device for video files for festivals etc for about 4 years. Unique amongst software (?) players PP can easily adapt to the multiple resolutions, codecs and, especially, frame rates we now encounter via Sequence Se
-
I cannot open a database in CR 2008. I have a client's database (dbf) which I copied to another computer where CR 2008 is running. I want to develop some reports. When I try to enter the database files using The Database Expert, the files are listed