How to config automatic transfer SO to PO or PR

I know in R/3 470, system doesn't support SO transfer to PO or PR automaticly. Does mySAP support this function?
Best regards
Peter

Hi Beigen,
In SAP r/3 it is very much supported to create PR or PO automatically. We have implemented in our system and it works perfectly fine.
Take a look at the steps involved in the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/8f/372e3b7532394ce10000000a114084/frameset.htm
Cheers
VJ
Pls Note Mark useful answers and close the thread if it answeres ur question.

Similar Messages

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • How can I automatically transfer Palm address categories to Address Book?

    I've tried vcal export and tab/delimited export and the categorization is lost on the Mac. I also tried setting up the same categories in AB as I have on the Palm. Again, the addresses are NOT imported with the category info.
    Is there any way of avoiding having to recategorize all the addresses MANUALLY on the Mac?

    if you have never synced conect your iphone and go to the info tab. Select sync contacts with addressbook and hit apply. when prompted select merge and it will merge contacts.

  • How to create Automatic TO at MIGO

    Hi Guys
    How to create automatic Transfer order(WM)
    I need this after creation of MIGO
    Where I can see the TO number(Not TR)
    What are all the config setttings for this( Triggering Auto TO)

    Hi
    Use OMKX
    Or browse through
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Inventory Management>Activate Automatic TO Creation
    Regards
    Amuthan M
    Edited by: Amuthan M on Apr 22, 2009 3:12 PM

  • How to create Auto  . transfer order

    Hi Guys
    How to Create Automatic transfer order after posting GR wrt PO
    What are the settings required for this?

    Hi,
    Please refer the below link
    http://help.sap.com/saphelp_45b/helpdata/EN/c6/f83db14afa11d182b90000e829fbfe/content.htm
    Regards,
    Deepak.

  • I have 2 email accts.  I set it up so that email from one account automatically transfer to the other account.  How do I undo it?

    I have two email accounts.  I was having problems with one account and set it up to automatically transfer emails from the problem account to the other.  The account with the problem has been fixed.  How do I undo the automatic transfer?

    I don't suppose it will be exactly the same on my ISP's webmail interface as Comcast's, but I've just checked the route I have to follow with my provider (Orange in France):
    Log on to your email account in a web browser > Select Mail's Preferences > Select Forward my email to another mailbox.
    If you don't have this, or a similar option, I'm afraid I'm stuck for other ideas .

  • How can I (automatically) import new photos of the photostream on my local disc (Mac)? Don't want to use new icloud service. Simply import.

    New Photo app on Mac.
    How can I (automatically) import new photos of the photo stream on my local disc (Mac)? Don't want to use new icloud service. Simply import.
    With iPhoto every new photo was automatically imported and saved on my local disk (with "full resolution" that's what I only need). In the new photo app I have still my photo stream and when I move a photo (drag and drop from the photo stream) to a new album it indicates a (plus). My understanding is that the photo is now copied to my local disk. But when I deleted the photo in the photo stream it was also deleted in the album !?
    If that is the case I can use the photo stream only until I reach the max of 1.000 photos, then I have to delete photos and I will have no copy left.
    How can I "physically" copy a photo of the photo stream to my local disk? I just want to "transfer" all pictures taken with Ipads, Iphones to my central storage on the Mac. Please don't propose to connect it via iTunes (cable) to the Mac.
    Any other suggestions?
    thx
    -Tom

    The amazing device cannot do it because no amazing developer has written an app for it.  There is some interest, others have asked, but i have a hunch that the market is fairly limited, and no developer has jumped at the chance just yet.
    Any sort of tethered approach means try to feed the material to the pad thru the cck.  Which means the app would have to use the allowed/existing cck pathway in a manner that does not violate the sandbox rules.  That may be the problem.

  • How to get automatic plant and shipping point and storage location

    hi,
    sap gurus,
    how to get automatic plant and shipping point and storage location automatically into the sales order
    i have done all the config settings for that
    but its not appearing automatically.
    regards,
    balaji.t

    Hi
    Balaji...
    U can get the plant in sales order,  by doing the default the same in customer master or in  material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
    Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
    For S loc u have to enter manually in the sales order u can not get it automatically.
    Hope this will help you.
    Thx.

  • How to config the Default Values in IT 2006

    Dear Gurus,
                      My Client requirement is if i create Absence quota they want default quotas values
    eg PL= 40
         CL=7
         SL=5
    Then how to config the Default Values in IT 2006
    Other wise where i have to assign in Quotas limit
    Please advised
    Regards
    MHPO

    Configure ur Absence Quotas with Selection group and assign the value of that selection group in Quomo
    and run  RPTQTA00
    Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
    PersonnelIMG   Managing Time Time Data Recording and Administration Time Management   Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas  Evaluation.
    Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
    PersIMG  Time Data Recording and Administration onnel Time Management   Calculating AbsenceManaging Time Accounts Using Attendance/Absence Quotas   Set Base Entitlements  Rules for Generating Absence Quotas Entitlements  Base Entitlement for Absence Quota Generation.
    Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
    IMG  Managing Time Data Recording and Administration  Personnel Time Management   Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.
    Define Public Holiday Work Schedules  Personnel Time Management IMG  Classes
    Personnel Work Schedules  Personnel Time Management IMG   Group Personnel Subareas for the Work ScheduleSubarea Groupings
    IMG   Group Personnel Subarea Groupings  Work Schedules Personnel Time Management  Personnel Subareas for theDaily Work Schedule
     Daily Work Schedules  Work Schedules  Personnel Time Management IMG  Define Daily Work Schedules
    Work Personnel Time Management IMG   Define Period Work Schedules. Period Work Schedules Schedules
    IMG   Define Day Day Types  Work Schedules Personnel Time Management  Types.
     Day Types  Work Schedules  Personnel Time Management IMG  Define Day Types.
    Day Work Schedules  Personnel Time Management IMG   Define Special Days.Types
    Work Personnel Time Management IMG   Define Employee Subgroup Work Schedule Rules and Work Schedules Schedules  Groupings
    Work Work Schedules  Personnel Time Management IMG   Define Groupings for the Public HolidaySchedule Rules and Work Schedules  Calendar.
    Work Work Schedules  Personnel Time Management IMG   Set Work Schedule Rules and WorkSchedule Rules and Work Schedules  Schedules.
    Work Work Schedules  Personnel Time Management IMG   Generate Work Schedules ManuallySchedule Rules and Work Schedules
    IMG  Set Planned Working Time  Work Schedules  Personnel Time Management  Default Value for the Work Schedule.
     Personnel Time Management IMG   Set Default Value for Time Management Planned Working Time Work Schedules  Status.
    Time Data Recording and Personnel Time Management IMG   Define Personnel Subareas for Substitution Substitutions Administration  Types.
    Time Data Recording and Personnel Time Management IMG   Set Defaults for Substitution Types. Substitutions Administration
    IMG  Absences Time Data Recording and Administration  Personnel Time Management   Group Personnel Subareas for Attendances and Absence Catalog  Absences.
    Time Data Recording and Personnel Time Management IMG   Define Absence Types. Absence Catalog  Absences Administration
    IMG   Absences  Time Data Recording and Administration Personnel Time Management   Define Counting Classes for the Period Work Absence Counting Absence Catalog  Schedule.
    Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Group Employee Subgroups for Time Quotas.Absence Counting (New)
    IMG   Absences  Time Data Recording and Administration Personnel Time Management   Group Rules for Absence Counting (New)  Absence Counting Absence Catalog  Personnel Subareas for Time Quotas
    Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Define Rules for Rounding Counted Rules for Absence Counting (New) Counting  Absences
    Time Data Recording and Personnel Time Management IMG   Rules for Absence Counting  Absence Catalog  Absences Administration   Define Counting RulesAbsence Counting (New)
    Personnel TimeIMG   Absence Catalog Absences  Time Data Recording and Administration Management   Define Counting Rules  Rules for Absence Counting (New)  Absence Counting  Deduction rules for Absence quotas
    Time Personnel Time Management IMG   Absence Absence Catalog  Absences Data Recording and Administration   Assign Counting Rules to Absence Types.Counting
    Personnel TimeIMG   Attendances/Actual Working Time Data Recording and Administration Management   Define Attendance Types.Times
    Time Personnel Time Management IMG   Attendances/Actual Working Times Data Recording and Administration   Assign Counting Rules for Attendance counting (New) Attendance counting  Rules to Attendance Types.
    Time Data Personnel Time Management IMG   Managing Time Accounts Using Attendance/AbsenceRecording and Administration   Define Absence Quota Types. Time Quota Types Quotas
    PersonnelIMG   Managing Time Time Data Recording and Administration Time Management   Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas   Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas  Evaluation.
    Time Time Evaluation  Personnel Time Management IMG   Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
     Time Data Recording and Administration  Personnel Time Management IMG  Managing  Calculating AbsenceTime Accounts Using Attendance/Absence Quotas   Set Base Entitlements  Rules for Generating Absence Quotas Entitlements  Base Entitlement for Absence Quota Generation.
    Personnel TimeIMG   Managing Time Accounts Time Data Recording and Administration Management   Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas   Determine Validity and Deduction Periods.Generating Absence Quotas
    IMG  Managing Time Data Recording and Administration  Personnel Time Management   Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas   Define Set Base Entitlements  Rules for Generating Absence Quotas  Generation Rules for Quota Selection.

  • TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

    Dear Experts,
    I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
    ‘%Error: Config file transfer failed – Unknown error –refer to log
    Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
    Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
    WLC code: 7.4.100.0
    PFA as the error snippet.
    Thanks and Regards,
    Adnan

    Hi Kaneswaran,
    Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this. 
    Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue. 
    Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
    Best Regards,
    Muhammed Adnan 

  • How do I disable transfer of purchases to my iPad when syncing?

    Hello all. Let me preface this buy saying that I am an Apple software support person with over 15 years of experience (11 of that working for a Apple specialist).
    Is there anyway to disable the automatic transfer of purchased items when syncing my iPad? I have looked around and no one seems to want to give an answer. They go on and on about how Apple wants you to transfer purchases and you really should let iTunes do this. I know all these things, but I am looking for an answer. Can this be turned off?
    Thanks in advance for an answer (hopefully).
    Kurt.

    If you mean go to iTunes preferences and under the store setting, make sure the choices of always check for downloads is "unckecked", I have been through that already. Any other ideas?

  • How to config PKCS11.cfg during FAXs installation

    Hi guys,
    I am the rookie in Flash Access and want to setup environment on my local site. I have gone through steps from quickstart guide.
    I have a problem in installing license server now. I want to run Validator.bat to verify configuration, but I am getting error and paste it as below from flashaccess-global.log:
    2010-08-19 12:18:22,544 INFO  [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Unable to initialize the PKCS11 key store factory. If PKCS11 is to be supported, please ensure 'pkcs11.cfg' is configured correctly and is supported on the target platform.
    2010-08-19 12:18:22,575 DEBUG [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Exception thrown while initializing PKCS11 key store factory
    com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploym ent$DeploymentException: java.io.FileNotFoundException: C:\Program Files\Java\Tomcat\licenseserver\flashaccessserver\pkcs11.cfg
              at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment.getGlobalResource(MultiTenantDeployment.java:171)
              at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.<init>(PKCS11KeyStore Factory.java:100)
              at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.createSingleton(PKCS1 1KeyStoreFactory.java:59)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:138)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:112)
    Caused by: java.io.FileNotFoundException: C:\Program Files\Java\Tomcat\licenseserver\flashaccessserver\pkcs11.cfg
              at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment$UpdatableFileSystemResource.<init>(MultiTenantDeployment.java:263)
              at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment.getGlobalResource(MultiTenantDeployment.java:168)
              ... 4 more
    2010-08-19 12:20:22,568 INFO  [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Unable to initialize the PKCS11 key store factory. If PKCS11 is to be supported, please ensure 'pkcs11.cfg' is configured correctly and is supported on the target platform.
    2010-08-19 12:20:22,583 DEBUG [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Exception thrown while initializing PKCS11 key store factory
    java.lang.reflect.InvocationTargetException
              at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
              at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
              at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
              at java.lang.reflect.Constructor.newInstance(Unknown Source)
              at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.<init>(PKCS11KeyStore Factory.java:105)
              at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.createSingleton(PKCS1 1KeyStoreFactory.java:59)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:138)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:112)
    Caused by: java.security.ProviderException: Error parsing configuration
              at sun.security.pkcs11.Config.getConfig(Config.java:71)
              at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
              at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:90)
              ... 8 more
    Caused by: sun.security.pkcs11.ConfigurationException: Unexpected value: Token['['], line 1
              at sun.security.pkcs11.Config.excToken(Config.java:339)
              at sun.security.pkcs11.Config.parseWord(Config.java:498)
              at sun.security.pkcs11.Config.parseLine(Config.java:546)
              at sun.security.pkcs11.Config.parseLibrary(Config.java:617)
              at sun.security.pkcs11.Config.parse(Config.java:362)
              at sun.security.pkcs11.Config.<init>(Config.java:194)
              at sun.security.pkcs11.Config.getConfig(Config.java:67)
              ... 10 more
    2010-08-19 12:20:23,990 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
    2010-08-19 12:20:24,162 DEBUG [root] Appender created with name: [Partition(flashaccessserver)]
    2010-08-19 12:20:24,552 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
    2010-08-19 12:20:24,584 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
    I have read documentation the pkcs11.cfg should not be used if doesn't enable HSM.
    I am not very familiar with java application server , so maybe it's a stupid question. I am wondering how to config it to avoid error ?
    Very appreciate your answer in advance.

    Hello Lewis,
    It is always a good idea to run the Validator tool to verify a deployment.
    The PKCS11.cfg file referenced below is an optional configuration file, that needs to be present/configured if-and-only-if HSM access needs to be enabled on the server.
    The error you are seeing below is not something to be concerned about unless you plan to enable HSM access on the server. The stack trace is a DEBUG level log message. If you notice, the INFO log message suggests that this is not a critical error. When such an error is encountered with the PKCS11 config file, the server automatically defaults to not using HSM.
    Hope that answers your question.
    Regards,
    Safdar

  • 5.1 Audio with 3 jacks: How to config this ?

    Good evening everybody,
    I'm having since short a 5.1audio set, a logitech x540. I love this set, not too priced for a 5.1set. I'm coming from some crappy cheap trust 2.1set, so this is a big improvement.
    But now the problem: my set needs to be connected to my motherboard with those '3 jack cables', because it's not having a coax cable. (normal for a budget set). But my motherboard has got only those 3 'normal' jacks. But not a big problem, i found the following in my motherboard guide:
    Light Blue : Surround
    Lime    : Front Speaker Out
    Pink : Center/bass
    So hardware seen it isn't a problem to use those jacks . So i connected them like told in my motherboard manual. But now i don't get them working under linux. I don't know how to config it. I'm having the following audio card:
    00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
    I'm using alsa, so i've searched in alsamixer, but i didn't find anything usefull there. Anybody who can help me with this pls ?

    I have a very cheap C-Media PCI CMI8738-MC6 6-channel sound card connected by three jacks to Logitech 5.1 speakers. I also have a headset for Skype connected to the onboard sound.
    Here's what I know:
    1) To always get the sound card module to load before the onboard sound module, I have added snd_cmipci to my "modules" list in /etc/rc.conf. This means the cmi card is always card 0, the module for the onboard sound gets loaded automatically later.
    2) I have ~.asoundrc as follows:
    # 6 channel dmix:
    pcm.dmix6 {
    type dmix
    ipc_key 1024
    ipc_key_add_uid false
    ipc_perm 0660
    slave {
    pcm "hw:0,1"
    rate 48000
    channels 6
    period_time 0
    period_size 1024
    buffer_time 0
    buffer_size 5120
    # upmixing:
    pcm.ch51dup {
    type route
    slave.pcm dmix6
    slave.channels 6
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 1
    ttable.1.3 1
    ttable.0.4 0.5
    ttable.1.4 0.5
    ttable.0.5 0.5
    ttable.1.5 0.5
    pcm.duplex {
    type asym
    playback.pcm "ch51dup" # upmix first
    capture.pcm "hw:0"
    # change default device:
    pcm.!default {
    type softvol
    slave.pcm "duplex"
    control {
    name "Software Master"
    card 0
    # for aoss
    pcm.dsp "duplex"
    pcm.dsp1 "duplex"
    3) To allow amarok to play each speaker individually using a 6 channel DTS .wav file I added the following to my ~.xine/config
    audio.device.alsa_surround51_device:plughw:0,1
    4) You can download a 60MB 6-channel DTS test file here. It is in swedish but tests each speaker individually.
    My info came from browsing the Alsa wiki

  • How to get automatic message output

    Hi,
    How to get automatic message output while creating po cause i have done all setting in the config but still it does not work what else i have to do.
    And 1 more thing how we can maintain condition record for Printoutput & External send for one output type.
    Regards,
    Anant

    Hi,
    Please follow the below steops for the Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type, Purch. Organization, Vendor
    2. Access Sequences
    SPRO ->     -> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    *4. Message Determination Schemas*
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data-Messages- MN04
    Here you can maintain the condition record.
    All above steps u can do from transacton NACE also
    now when u create po in the messages u will get the out put method as u have maintained in the above steps.
    Regards,
    Manish

  • How to config CME with FXS card for analog phones

    I want to config FXS cards in CME router with SCCP protocol for transfer, pickup ... feature. I can find information about the sccp (the command about stcapp), but I can not find the information about how to config CME, e.g. the phone no.(something like ephone-dn .... )
    Can anyone help me ? or send me the link
    Thx
    Dennis

    Thx Johncaston,
    Your config is for H323, it doesn't support features, something like transfer funtion .......
    I have found the config for SCCP, let's share my finding
    ====================
    ephone-dn 178
    number 9933
    description Board Room
    name Board Room
    hold-alert 30 originator
    ephone-dn 179 dual-line
    number 9990
    description Meeting Room 3
    name Meeting Room 3
    hold-alert 30 originator
    ephone 95
    mac-address 9556.60FA.0200
    type anl
    button 1:178
    ephone 96
    mac-address 9556.60FA.0201
    type anl
    button 1:179
    GigabitEthernet0/0 is up, line protocol is up
    Hardware is MV96340 Ethernet, address is 0019.5566.0fa0 (bia 0019.5566.0fa0)
    ================================
    stcapp ccm-group 1
    stcapp
    sccp local GigabitEthernet0/0
    sccp ccm 172.16.136.125 identifier 1
    sccp
    sccp ccm group 1
    associate ccm 1 priority 1
    signaling dscp af31
    audio dscp ef
    voice-port 1/0/0
    cptone HK
    caller-id enable
    voice-port 1/0/1
    cptone HK
    caller-id enable
    dial-peer voice 21 pots
    service stcapp
    port 1/0/0
    dial-peer voice 22 pots
    service stcapp
    port 1/0/1
    =========================
    Thanks !!
    Dennis

Maybe you are looking for

  • Assigning Multiple Desktops

    Hello, I want a user to logon with Desktop X but then if he navigates to Location Y in the portal, I want a new desktop to be displayed. Is this possible? Thanks Mr.T

  • Import data from Sql Server 2005

    We have a requirement where we need to import/access data from an Sql Server 2005 database into an Oracle 9i/10g database? Basically, the need is to create some link between Sql Server and Oracle database? In, case of two Oracle databases we could ha

  • Force Infopath Filler to open instead of Designer

    Hello, We recently upgraded our farm to SharePoint 2013 (from 2010), and the default behavior of the desktop InfoPath client is different. In SharePoint 2010, a user clicking on an InfoPath form in a SharePoint library would get the InfoPath Filler c

  • EA1 - Error displaying code insight

    All, I recently tried to use the code insight feature. In the main worksheet, the cursor stops blinking and then it starts back up after a few seconds - the insight window never shows. But when I check the logging page, I see the following two error

  • Uploaded files and Session id

    I was wondering if it is possible to associate uploaded files in 'wwv_flow_files' with the session id of the session during which the file was uploaded. Is there any field in the 'wwv_flow_files' that provides the session info? I need to generate a r