How to Configure a Pop Up Message in Sales Orders

Hi,
How can I display a message when creating or changing sales orders? I need the configuration steps for 4.6.
Thanks,
Sai.

Hi,
First you need to make an entry of your pop up message in the sales text view of the material master and when the user enters that material, he will be able to see that message. The Config part is in spro/sd/basic func/text control. You need to define the text types, access sequences and the text determ procedures.
You have to maintain the desired text in the material master sales text editor and turn on the indicator 'Display texts during transfer' under Text control in configuration for the sales order-item for the material sales text. This will display a Pop-up message when booking orders
Reward points if found helpfull...
Cheers,
Siva.

Similar Messages

How to configure a pop up message when creating an appraisal?

Hi All,
I have a question.
When the supervisor creates an appraisal for an employee, the supervisor is obligated to create Objectives for the employee but creating Competencies are only optional for executives (people group). When the supervisor has finished creating the appraisal and wants to review it, he will need to click on a Continue button.
When the continue button is pressed, a warning pop up message will appear if the competencies created was null. As it is only a warning pop up message the supervisor can just click ok and continue to the review page.
Now I am needed to configure this pop up message for the appraisal creation page and I would like to know how do I go about in searching for it? Should it be in the OAF java files or is the pop up message can be configured using personalization? I just want to know how to search for the configuration of this pop up message. Thank you
regards,
Ilham

Hi Sheela,
Though you made 'Dataline' field as mandatory, system will throw an error message and will put MOUSE CURSOR on that missing field. So ultimately user would come to know that a particular field is missing.
And in SAP there would be lots of mandatory fields and it's really not feasible to put pop-up messages for such requirements and that too in transactions like CMR.
Tell user that system will automatically put MOUSE CURSOR on a particular mandatory field anytime anybody misses to maintain it. As a SAP consultant, your job is to convince the user with such standard functions.
If at all you want to put pop-up message for it, then you need to go for User Exit development.
Revert back if any further issue.
Regards,
Anup

How to configure header out put preview in Sales Order

Hi ,
i have couple of questions.....
1,How to configure header out put preview?
2.Step by step procedure to configure handling units
Points for right answer
Lekha

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

How to configure purchase requistion in third party sale pls send me detail

dear expert
how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
vicky

you can find the details in the below links
Re: THird party sales complete scenario
http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
Regards

To POP up the open sales order quantity in Sales order

Hi gurus,
I hav a requirement that for example,I raised an order for 100 Qty and delivered 80 materials 20 is open,So when i raise an order for the same material for 50 Quantity,I need to get POP up box saying that 20 qTY IS OPEN. in Sales order.
I am an SD consultant Please assist me in doing this requirement.
Regards
Narayana
Edited by: manam narayana on Feb 6, 2008 12:08 PM
Edited by: manam narayana on Feb 6, 2008 12:30 PM

Hi Usha,
Thanks for ur early reply,can u make it clear for me.Like when i enter a sold to party and material in VA01,This should check the open order quantities for a particular combination of sold to party and material and POP UP a message saying that the customer has open quantities for this material,So this Open quantities i found in VBBE table.Can u please explain me in clear how can i compare the values in T.code VA01 to VBBE table and how can i get POP UP message.
Regards
Narayana
Edited by: manam narayana on Feb 6, 2008 12:15 PM

How to prevent from creating multiple deliveries per sales order

Hi,
Appreciate your help on the below.,
I do not want the users to create multiple deliveries for a single sales order. They should only be allowed to create one delivery and it can either be a full delivery or a partial delivery.
Is there any possibility in configuration to do this? I checked the customer master configuration, but it is only for sales order line item.. I only need one delivery for the entire order, regardless of whether it included all line items or not.
If the user tries to create a second delivery for the same order, it should ideally give an error message and stop the system from creating the second delivery
Appreciate your help.
Thank you.
Keshini

Thanks Marian for your feedback.
I tried this again, however it still works only at item level.
Say i have a sales order, with 2 line items with 50 each.
Say i create an delivery for only the first line item for 20, delivery gets created.. It doesnt allow to create the delivery for rest of the 30 on that line item,
However if i try to create a delivery for the second line item, it allows and the delivery gets created.
I only want one single delivery for the entire order.
Thanks,
Keshini

Customer error message in sales order on save

Hi Friends,
as per requirement i have to raise the error message and system should enable the field to change values. This should happen when condition is not met on Saving of Sales order.
For this, i have used the user exit USEREXIT_SAVE_DOCUMENT_PREPARE. But the problem is system throwing error message and all r in display mode only. as per my requirement system should allow to change the error value field.
i have verified many posting in this SDN, but nothing is working out.
Please guide me, how to raise the error message and system should enable that filed.
My doubt is where should i raise the error message in sales order (MV45AFZZ)??? if any badi to raise the error message also fine for me. I tried many ways like... message with display like..... and set / get parameters and badis.... but not able to find the correct solution.
Thanks in Advance.
Bala

Hi
You need to use check for enahcement spot, which will be help to you.
Bcz you are throwing custom error message in the standard transaction, once the error is display, you could not able to change the values. your prob can be solved by using the enhancement sport.
This is include name (Include:MV45AF0B_BELEG_SICHERN).
In the above include, you need to create a enhancement spot after this spot (ENHANCEMENT 16 OI0_COMMON_SAPMV45A.)
write your custom code and while displaying an error message. set flag = 'x', then use below code. It will display error message once you press ENTER, you will get the sale order in change mode, you change the values.
IF flag = 'X'.
          fcode = fcode_gleiche_seite.
          perform fcode_bearbeiten.
          ch_subrc = 4.
          exit.
        ENDIF.

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

Attach sapscript for email message in sales order

Hello to all.
I need some help..
I'm trying to include a sapscript form in a message on sales order in VA01. I can already send email to outside SAP, but can't include de sapscript form into the mail.
I make a copy of the standard message MAIL, and include de sapscript form that i want to attach.
Anybody have an idea how to solve this issue?
best regards,
Susana Marques

Hi
I think u need to create a message type MAIL just as u done, but u should check if this kind of message is managed by your driven program.
Check the call of FM OPEN_FORM, here the parameter DEVICE has to have the value MAIL, perhaps here it's always transfered PRINT.
The second control is on master data of the partner of the message: he has to have the mail address.
The last control is on the master data of the user: he has to have the mail address.
Max

How to add a table layout in CRM Sales order?

dear all ,
anyone know how to add a table layout in CRM sales order customer tab that using the EEWB added?
can EEWB do this? i didn't find the appropriate business object......

Hi , Swapna
is you mail address right? can not send out.
first , you should have added one field using EEWB , then to EEWB , find the extension , double click on the task, there you will find a "object list" on the right, the list will give you many many very important information , you should look through .
then double click on the "screen: ..........EEW......." , layout , there you will find the field you have added in . and you can draw anything you want there , then back to the screen flow , write you flow logic in PBO and PAI .
about the global data definition, again to the "object list", you will find a "Report source code: ......................TOP". in there ,you can define all you data .
another thing if you want to save your input field to database tables that you draw (not by EEWB added)
two ways:
1. write update table directly in PAI module .
2. you can use this BADI : ORDER_SAVE , this is when you save the order to trigger the save action.

How can i change unit of measurement in sales order on header

Dear all,
I have material master with base unit of measurement " Ea ".
I have to take unit Pc in sales order.
how can i change unit on header in sales order.
i changed unit on line item in sales order by setting in sales unit field in material master.

Hi,
You can very well do it, please do the following steps,
Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
Now create the sales order for that resp. material, you will find that system will pick up
the sales unit which is maintained in the material master's sales orgnization tab.
For this you need not to change at the header level of sales order
Please check and revert.
Thanks,
Hrishi

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

How to Configure a Pop Up Message in Sales Orders

Similar Messages

Maybe you are looking for