How to configure a required field in the Vendor Account Creation?

Hello,
Good day to all!
Please kindly help me change the set up for Transaction FK01: Create Vendor. I need to set the field for Withholding Tax Number as a 'Required' field during creation of vendor account for local vendors only. How can I be able to do that? Please advise.
Thank you so much in advance..
April

This should have been posted in the SCM forum. Anyway, here is the path in config(tcode SPRO).
Implementation Guide for R/3 Customizing (IMG)
-->Financial Accounting
   -->Accounts Receivable and Accounts Payable
      -->Vendor Accounts
         -->Master Records
            -->Preparations for Creating Vendor Master Records
               -->Define Account Groups with Screen Layout (Vendors)
Once you choose this option, you will be presented with a screen where you have to choose an account group and click the display icon. In the next screen, under the 'Edit Status' section, double click on 'Company Code Data' and then in the next screen double click on 'W/holding tax data, w/h tax 2'. Here you can change the attributes to make it required.
Srinivas

Similar Messages

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

How can we add additional fields to the BP Search RESULT screen?

Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!

Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

How to add a standard field to the Product search criteria ?

Hello all,
despite my searches on google and sdn, i'm still confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
Could someone give me the needed detailed steps for this?
thanks
Ludovic

Hi
Chk ths link out :
http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
Rgds,
Swati

How can I format a field in the form creator?

How can I format a field in the form creator? It's putting the same text in all the fields within a table. I want each field within the table to have different text. As soon as you click out of the table, all the text is the same.
I even changed the fields from a text box to a drop-down list so a person can make their selection, which will be a quantity from 0-9. There are two of these such fields. You make your selection in each, click off the table and both fields show whatever I selected in field 1. The original Qty I selected in the bottom field was a 5 but it changed it to whatever is in the top field on it's own. I've added a screen shot.

This behaviors usually happens when you create the fields but a copy paste command from one of the fields. The copy paste command assumes that your intentions is to maintain a copy of the field in two separate locations (e.i, a form field "company name" printed in each and every page of a multi-page form document.
Go to the properties fields of each field and make sure to assign unique form field names.

How do I change a field in the sum in ALV (List or grid)

My alv, for example:
1.10
2.30
1.50
Sum(DO_SUM) : 4.90
But I need to CEIL( 4.90 ) before showing .
It should be shown as 5.00 in alv.
How do I change this field in the sum ?

Use the following code in a PBO module or in an adequate event method
data: total type ref to data,
      subtotal1 type ref to data.
field-symbols: <total> like gt_sflight,
               <subtotal1> like gt_sflight.
call method grid1->get_subtotals
importing
    ep_collect00 = total
    ep_collect01 = subtotal1.
assign total->* to <total>.
assign subtotal1->* to <subtotal1>.
Look at [ALV Grid Control (BC-SRV-ALE)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf]
Regards

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

Hi jshira86,
You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
Hope this answers your question!
~Joe

How do we validate input fields on the selection screen

How do we validate input fields on the selection screen

hi balram,
u can validate input fields using <b>AT SELECTION-SCREEN</b> Event.
PARAMETERS : p_werks TYPE marc-werks.
AT SELECTION-SCREEN ON p_werks.
SELECT SINGLE *
FROM t001w
WHERE werks = p_werks.
IF sy-subrc <> 0.
MESSAGE 'Invalid Plant' TYPE 'I'.
ENDIF.
Like this, we can validate user input for plant.
check this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/1eb6c705ad11d2952f0000e8353423/content.htm
Reware me if useful......
Harimanjesh AN

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

How do I bring form fields to the front or back?

I have a document with many form fields/push-buttons in order to create pup-up effects in an info graphic.
So I use fields to create a mouse-over hot spot, and others that pop up. Now, of course, the hot spot must be in front (or on top), otherwise it gets distracted in it's mouse-over function by the popped-up object (image) that lays over it. (The result would look like a flashing effect, as you roll over the hot spot.)
Now how do I arrange the fields?? Ich can arrange images and texts to come to the front or hide behind other objects. But in the form field editing mode there is no such option. Also it doesn't work to just cut and paste them, they re-appear in their former position, often behind the other fields.
Please, help! Thanks, Peder

Thanks, I will give it a try. To "recieve the focus" means being activated / hovered?
Am 22.04.2015 um 18:49 schrieb George_Johnson:
How do I bring form fields to the front or back?
created by George_Johnson in PDF Forms - View the full discussion
The tab order effectively sets the z-order, but if a field is not read-only it will be set to the front if it receives the focus.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7465780#7465780 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7465780#7465780
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in PDF Forms by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
···)····• Blixen
werbliche Kommunikation
Peder Iblher . Wichertstraße 16/17 . 10439 Berlin
Telefon 030 - 250 400 401 . Fax -409 . Mobil 0160 - 93 81 58 60
[email protected] . www.blixen.eu . www.facebook.com/blixen.eu

How to configura multiple ldap server to the sun access manager

Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
Mouli

There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard

How do I lock a field so the current type in it cannot be overriden?

how do I lock a field so the current type in it cannot be overriden?

You can make the field Read Only. You need to be aware that if the form is cleared the typed value in the field will clear and the text in the "Options" "Default Value" will become the field's value. You can use JavaScript to make a form field Read Only and set the default value.

Field Bline date is a required field for G/L account 1200 122400

While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001     Field status for 0001
1000     Field status for CoA 1000
3000     Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045     Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
   PayT        Sales text
Day limit   Explanations
0001
0           Payable immediately Due net
0002
0           Within 14 days 3 % cash discount
              Within 30 days 2 % cash discount
              Within 45 days Due net
0003
15          Within 14 days 2 % cash discount
              Within 30 days 1.5 % cash discount
              Within 45 days Due net
              Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron

Field Bus. Area is a required field for G/L account 5000 20000500

Dear all,
I bumped into the following error when trying to perform GR-101 in MIGO.
My question is "Do you think the error is due to inconsistency between MM movement type & GL master data. Could it be MM movement type used in the transaction below?
How to make sure business area is a mandatory field for that movement type?
Our company policy is business area is require for all GL master.
Field Bus. Area is a required field for G/L account 5000 20000500
Message no. F5808
Diagnosis
The value for field "Bus. Area" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "20000500" in company code "5000" linked to the field selection for posting key "89".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bus. Area". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hi,
Goto T-code -- FS00 there enter your G/L account 20000500 and company code goto the tab---- create/bank/interest
click the field status group and make the radio button for Busines area as optinal and save then try doing MIGO_GR .
Check with your FI team if the field Business area is requried field ...then enter the same manually during grn.

Field Prof.Segmt is a required field for G/L account SC01 410050

Hi all,
i am getting the following issue when trying to release an SD invoice to FI
Field Prof.Segmt is a required field for G/L account SC01 410050
Message no. F5808
Diagnosis
The value for field "Prof.Segmt" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "410050" in company code "SC01" linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Prof.Segmt". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
please advise where to look
thanks
Brian

Hi,
i m receiving the same error! did you figure out the problem, how did you solve it?
thanks, and regards,
J

How to configure a required field in the Vendor Account Creation?

Similar Messages

Maybe you are looking for