How to configure Accessibility support for JIniatiator 1.1.8.16

Hai
I want to give accessibility support of JInitiator1.1.8.16. I have installed JInitiator1.1.8.16 to access oracle forms. Basically I like to run Monkey.jar(Accessibility tool) on orcale form pages so that I can get all the events in the oracle form pages.
For stand alone Java application and JRE plugins I can able to get the events using the Monkey.jar. But I cant get the events for the JInitiator1.1.8.16 using Monkey.jar. So please give me some notes so that i can get events for oracle form pages with JInitiator1.1.8.16 using Monkey.jar.Thanks in Advance
Magesh Kumar
Caravel Info Systems Pvt Ltd.,
Bangalore,India

This forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10

Similar Messages

How do i access word for mac on my macbook air?

how do i access word for mac on my macbook air?

Purchase it. Here's one link to an Amazon site to buy one of the many Office configurations:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/ref=sr_1_3?s=so ftware&ie=UTF8&qid=1349217216&sr=1-3&keywords=office+for+mac
You would receive Office on a CD, and need a disk drive for your MacBook Air to access so you could download the software.

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Edit ---> referance -----> general ------> language

How can I add support for JPEG 2000 to Final Cut Express?

How can I add support for JPEG 2000 to Final Cut Express 4? I need to export an .mov file in the JPEG2000 format but it is not available as a quicktime export option. Is this something that I can add via a quicktime .component? Would appreciate any insight anyone might have... Thank you.

I believe you need to purchase the QuickTime Pro key ($29.99 USD). Once you enter the registration number in System Preferences for QuickTime Player 7, it 'unlocks' several export features, including JPEG2000.
See:
http://support.apple.com/kb/SP521
http://support.apple.com/kb/HT3820
http://support.apple.com/kb/HT2240
http://store.apple.com/us/product/D3380Z/A/quicktime-7-pro-for-mac-os-x?fnode=62
-DH

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

Cannot boot! Cannot charge! How long can we support for RIM?

First of all, I am very disappointed to RIM
From the beginning to now I have used many BlackBerry mobile phone, RIM has been rigorous work and good service. But since I used 9520, now playbook, lets me lose confidence to the RIM, this is real
The escalation of the 668 systems, playbook can not boot, countless toss, numerous times to restart, no solution . After friends advice, finally able to boot.
I don't know such a famous company, before the update products, why there will be such a mistake.
Boot problem is solved, but then again, playbook does not charge, still numerous toss, numerous times to restart, power is reduced from 20% to the present 0%. until now still can not solve.
I don't know, so rigorous style of a company, why not on major issues, the first time to give solutions for every user. Why???
How long can we support for rim? Maybe every user heart will understand.
Add content:
Not charging performance:
In addition to power has no change and in reducing, other phenomenon are exactly the same than a normal machines
No matter how I restart the device, how to charge, all have no effect
Try method:
every 4 minutes hold "power+v-+v+“（three key）to restart; replacement charger plug; the mode of standby charging; continuous plug-in charger; after connecting DBS to connect the charger; continuous charging hours;
The above methods are fellow Netizens suggestions, but no one can save my playbook.
RIM, can you tell me how to do?

why did not have anybody, do something?

How to use wlst to configure access policies for JMS ?

Hello,
I am trying to set access policies for a JMS unified queue. It can be done easily with the console, but I could not find how to do it with wlst with version 10.0 !
I've found the following olds posts on this topic:
1. WLST Script for Protecting a JMS: WLST Script for Protecting a JMS Resource.
and
2. Create a JMX Policy by script: Create a JMX Policy by script
I could not find the "resourceId" string as stated in first link for Weblogic 8.1 SP6.
And following second link, is not working after a stop/restart of weblogic servers. :-(
Do you know a way to configure an access policy for a JMS queue with wlst tool ?
I have also tried using configToScript() command to retrieve security policy information from what has been done on the console, but I was unable to find such information ! Is security saved by configToScript() ?
Edited by: 795310 on 16 sept. 2010 08:25
Editing links.
Edited by: Fernando on 17 sept. 2010 02:20
Add configToScript information.

Security data is not persisted in config.xml so it is not contained in the output from a configToScript command.
You may want to ask in the WebLogic Server - Security forum.

How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so much

http://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

How to configure internet proxy for portlet builder

Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
Sudarson

Hi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson

How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3

We recently upgraded to ECC 6.0 and installed Solution Man., very vanilla. Basically just to get the Key to do the upgrade with.
I would really appreciate it if someone could share any documentation that would provide guidance on how to now further configure SolMan for the following
1. Monitor our Landscape which comprises of ABAP ECC (java is installed though not actively using), and SAP BI 7.0
Sandbox, Dev, QAS and Prdn for BOTH ECC & BI
2. Download Support Patches from SAP Marketplace (currently we have had to donwload the long way with download manager creating a message to get them apporoved whew... this is work..)
3. Add messages to SAP Market Place (thru SolMan)
4 Possibly monitor security and manage userids etc (if possible)
And if there is functionality that will make the BASIS experience better I would definitely appreciate it. We don't need the help desk as we already have it ,but, we may take advantage of Project documentation
I would really really appreciate it if someone could advise
Kind Regards & Thank You
Maria

Hi Maria,
With solution manager you can definitely do a world of things, below is a list inclusive of the features you wanted:
1. Dowload SP-Stacks, etc - you will have to configure Maintenance Optimizer for this (MOPZ).
2. Monitoring - you can monitor your ABAP and JAVA stacks using the monitoring features of CCMS which is embedded in Solution Manager, please have a look at the monitoring setup guide (for NW04S) in the Service Marketplace. Basically, it uses agents such as SAPCCMSR for JAVA Stacks and SAPCCM4X for ABAP stacks.
3. You can also configure availability monitoring using th same guide as above - this uses the CCMSPING tool.
4. You can monitor your business processes using the BPM/BPMon features of solution manager - you will also get this guide in http://service.sap.com/solutionmanager.
5. You can scheule your earlywatch alerts (EWAs) in solution manager system - have a look at the following link for this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
6. You can also have DBACOCKPIT on your Solution Manager system and have it tomonitor backups, etc on your satellite systems. For thsi have a look at SAP notes 1028624, 1025707 and 1027146 (and the DBACOKPIT guide in SAP Note 1028624).
Hope this is helpful. Kindly award points if useful.
Thanks, Dibya

How to Create ACCESS key for different users

How to create or generate an ACCESS KEY which is required to make changes to the table V_FAGL_ACTIVEC (For New General ledger) for IDES 6.0. Is it created in table DEVACCESS, if so where or is it created in SU01 where user id's are maintained. Since I am working on IDES, I thought probably we can create it for each user in SU01, but dont know the steps to do it. Please help me. It is urgent.

Hi
ACCESS KEY - First of all its provided by SAP. You can get the key from http://service.sap.com -> SAP SUPPORT PORTAL -> Keys & Requests -> SCCR Keys -> Registration. Here u can register a DEVELOPER or an OBJECT, by this time SAP will give the ACCESS KEYS.
**Note : To access http://service.sap.com u should have S number login or like that.
Only after obtaining that ACCESS KEY, SAP will allow the DEVELOPER to create some objects or change or modify Delivered objects.
Why ACCESS KEY - For creating or accessing any object some one should be responsible. Suppose, any issue arises with an object then can easily track the details who has created or modified.
Reward with suitable points

Don't know how to configure wireless card for internet

hi i just move to a new place, and i do not know how to set up my mac for wireless connection. i was given the basic information for the internet to work, and it works for my pc but not on mac. i was given
Network Name (ESS-ID or SSID)
WEP Key Type (Encryption type)
WEP Key Format
WEP Key
where do i go to fill in these info for internet?
please teach me what i m missing for i m not familiar with network. thank u.

Airport is what Apple's trade name is for 802.11 wireless. If you have wireless in the computer, you have Airport. To see if you have Airport, on your menu bar, go under the  and choose "About This Mac." Click on "More Info." About midway down the list on the left, you'll see "Airport." Click on it. That will tell you whether you are wireless-capable or not.
If you do not have Airport, you will need to tether up to the router directly using an ethernet cable if you want internet access or else upgrade the computer with an Airport Extreme card.
If you do have Airport, on your menu bar, go under the  and choose System Preferences > Network >Show: > Airport>. Click on Network. If "locked," click on the padlock (lower left corner) to authenticate. Once authenticated, click on Show: and choose Airport. Click on Advanced (lower right corner). Click on "+" below "Preferred Networks" window. Answer the questions that you are asked, which will cover those four items (SSID and WEP info).
(Texas Mac Man: that link points to a guide for the Airport Express stand-alone wireless access point using /Applications/Utilities/Airport Utility, not for how to configure your Mac's built-in Airport Extreme card via System Preferences > Network. I could be wrong but I think annie.ryu is wanting information to configure the computer's Airport/Airport Extreme card via Sys Prefs' Network panel)

How to configure Accessibility support for JIniatiator 1.1.8.16

Similar Messages

Maybe you are looking for