How to configure acknowledgements in Proxy(SAP)u2013PI(7.1)u2013Jdbc Scenario

Hi,
I have a requirement where some information is required to be sent from SAP system to SQL table with PI in between. The scenario is of async type and i am planning to have acknowledgements (acknow.) to be sent from JDBC receiver to Proxy sender. This being my first time on acknow., i donu2019t have any clues as to how to handle this. I need your help on the below listed points:
1.) Out of System and Application acknow. which are the ones supported by JDBC receiver in an async mode.
2.) I am not using BPM so is it possible to enable acknow. in my case.
3.) What are the steps that i have to follow to configure acknow. in my scenario. (I will be obliged if they can be explained a little elaborately)
Looking for a lot of help from you folks.
Thanks & Regards,
Anshul

Hi Anshul,
>>1.) Out of System and Application acknow. which are the ones supported by JDBC receiver in an async mode.
System acknowledgments are supported
Check this wiki page http://wiki.sdn.sap.com/wiki/display/XI/Acknowledgement+types
>>2.) I am not using BPM so is it possible to enable acknow. in my case.
Yes
>>3.) What are the steps that i have to follow to configure acknow. in my scenario. (I will be obliged if they can be explained a little elaborately)
Your ABAP side should ask for an acknowledgment. so create a client proxy and refer the link on an exampel of code that need to be written in ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
Regards
Suraj

Similar Messages

How to configure Pay Roll in SAP

Dear Gurus,
How to configure Pay Roll in SAP. Pls suggest.
Regards
Pankaj
Please have a look at the forum search

Define Employee Sub Group Grouping for PCR and CAP / Check Payscale Area / Check Payscale Type / Check Assignment of Pay Scale Structure to Enterprise Structure / TARIF Feature / Create Control Record / Revise Payscale groups and levels / Create Wage type catalog / Employee Subgroup Grouping for primary wage types / Personnel Subarea Grouping for Primary Wage Type / Setup Payroll Period for Collective Agreement Provision / Check wage type group Basic pay / Define wage type permissibility for each PS and ESG / Check wage type characteristics / Maintain Valuation of Base Wage types /
Check Wage Type Group Recurring Payments and Deductions / Check Wage Type Group Additional Payments /Check Wage Type Group Membership Fees / Membership Payee /Determine allowed payees per membership type /Define Membership / Deduction Types /Define Trust Details for Provident Fund /Maintain Contribution Details for Provident Fund ( Feature 40EPF )
Assign Company Rates for Provident Fund / Define PF Trust Validity Period / Define Contribution type for Statutory rates for Provident Fund /Maintain ESI Eligibility Limit / Define Personnel Area and Subarea Groupings for ESI /Assign ESI Groupings for Personnel Area and Subarea/
Maintain Contribution Rates for ESI/
Maintain Gratuity Trust ID/
Maintain Gratuity Contribution Frequency and related wage types/
Define Contribution Rates for Gratuity/
Maintain Superannuation Trust ID/
Maintain Superannuation Contrib. Freq and Rel. Wage Types/
Define Contribution Rates for Superannuation/
Maintain Loan Types/
Create Loan Conditions/
Maintain Loans Grouping (Feature 40LGR)/
Maintain Salary Components ( Feature 40LSL)/
Max. no. loans allowed (LML1)( Maximum number of loans allowed at a time)/
Max. no. loans allowed (LML2)(Maximum no of loans allowed)/
Maintain Maximum amount for loans outstanding(LMVAL)/
Maintain Loans Eligibility Checks and Limits/
Maintain Accommodation Types/
Maintain the processing options for CLA/
Define Conveyance Types/
Assign eligibility criteria for conveyance allowance/
Define Professional Tax Grouping Details/
Assign Professional Tax Groupings for Personnel Areas and Subareas/
Assign Amounts for Professional Tax Deduction/
Maintain Method and Form Layout for Professional Tax Groupings/
Define Personnel Area and Subarea Groupings for Tax/
Assign Tax Groupings for Personnel Areas and Subareas/
Define Tax Codes/
Assign Tax Code Limits to Wage Types/
Assign wagetype to wagetype group offcycle /
Set Up Off-Cycle Reasons/
Specify default values for wage types Off Cycle/
Specify Default Values for Payment Methods/
Configure wage types for Section 80/
Configure wage types for Section 88/
Define other allowance or re-imbursement type for exemption/
Define priority for deductions/
Maintain recovery of arrears/
Define cumulation types for wage types/
Assign universal contribution groupings for universal contribution types /
Assign state for universal contribution grouping/
Assign slab code and other parameters for each state of univ.type./
Assign Contribution value for each slab./
Define Period Parameters/
Define Date Modifiers/
Check Payroll Accounting Area/
Generate Payroll Periods/
Generate calendar for cummulation/
Assign Basic Wage Types to Grouping for Allowances/
Define Pay scale groupings for Allowance/
Assign Pay Scale Groupings for Allowances/
Assign wage type model for Pay scale grouping for Allowances/
Calculate Eligibility for Raps/ . ....................................................................................................................................................................................................................................................................
If you get the knowledge then please . mark the questions as answered

How to configure dba cockpit in sap solution manager

Hello colleagues,
how to configure dba cockpit in sap solution manager??
Thanks!

Hi Victor,
Please go through this doc, it might helps you.
Sap Solution Manager - Dbacockpit
Sap Solman Instguide Dba Cockpit Setup
Regards
Amit

How to configure Xl Reporter in SAP Business One

Hi
Can you please tell me the steps for how to configure xl reporter in sap b1
Regards
Sandip

Hi Sandip,
In Sap 8.8 u no need to configure or install XL reporter .
While Installing SAP 8.8 XL reporter Automatically Gets Installed
And Also check whether MS Excel 2003 installed 2003 excel supports XL reporter
U can check under Sap Menu -
>Under Tools----
>u can find XL reporter .
Hope this helps u
Regards
Jenny

How to Configuration PDC Management in SAP

Dear Gurus
Please guide me how to configuration PDC management in SAP FI.
Regards
Tapan Maity

Hello Tapan,
Your requirement is not clear. Is PDC mean Plant Data Collection?
If yes, then PFB the required link for that.
Supply Chain Management - Plant Data Collection SAP R/3 Shop Floor Control (PP-PDC)
SAP ECC - Plant Data Collection - Time, Attendance and Employee Expenditures (HR-PDC)
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

How to configure Mail Alerts in SAP R/3 System.

Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How to configure the email in SAP

Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep Verma

Hello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM

How to configure ECS facility in SAP

Dear Friends ,
Please tell me how to configure ECS payment facility in SAP ?
Regards
Nilesh Vakil

Dear Friends ,
Please tell me how to configure ECS payment facility in SAP ?
Regards
Nilesh Vakil

How to Configure Table Graphics in SAP CRM 7.0

Dear all,
What is the main use of Table Graphics and How can we configure table graphics functionality in SAP CRM 7.0.
Kindly suggest in case any best practice documentation or other configuration document is available
Your help will be highly appreciated
Best regards
Raghu ram

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

How to configure a free proxy

Hi, how do we configure an imac intel to use a transparent US Http proxy that does not spill our IP address. Can someone help me to do this? Using Safari 3.
Thanks

So, which do I want? FTP proxy, Web proxy, secure web, etc.
How can I tell?
You're the one that knows what protocols you want to proxy.
If you want to proxy HTTP, then enable the HTTP proxy and enter your HTTP proxy server address.
If you want to proxy FTP then enable the FTP proxy and enter your FTP proxy server address...
I can't tell what one(s) you want to do. I had assumed you knew.
Also, do you know a good site to find these free transparent proxies?
Nope, sorry.
Finally, will they slow down my search speeds.
That depends on your choice of proxy.
Any connection you make will be passed to the proxy. It will forward the request for you, retrieve the response from the server and pass it back to you. Therefore you are entirely dependent on the speed of the proxy server itself, and its network connection.
There are two common uses for proxy servers, one is to (attempt to) anonymize your traffic, the other is to improve performance. The latter usually occurs when you have multiple people sharing a network connection (e.g. in an office) and the proxy can cache frequently used data.
In general, unless the proxy server you choose is directly between you and the site you're accessing, you're not likely to get any performance increase.
In addition, since anonymous proxies are sometimes used for... umm... less than honorable reasons, they are sometimes blocked by servers.
In other words, don't expect your web browsing experience to be any better for using an anonymous proxy.
I'm just trying to stream shows from the ABC site.
This will only help if they stream content over a protocol that your proxy supports.
For example, if they stream content over HTTP, you're probably OK, but if they use something like QuickTime's RSTP, RealPlayer, or (heaven forbid) WMV then setting a web proxy will have zero impact - you're not going to use it anyway.

How to configure backup parallel in SAP with oracle database?

Dear SAP,
We need your suggestion on oracle database backup parallel using brbackup, our SAP system run on:
OS: UNIX - SUN Solaris SPARC 10
SAP: ECC 6.0 SR3
Database: Oracle 10.2.0.4
Our production database are growing rapidly, estimate growing is 2GB/days. Right now we backup our Production using one tape that estimated time to online backup is 4-5hours.
In there future, if we stayed this configuration. It will take long time to backup and restore it's not applicable. That's why we are planning to add more tapes during backup (4 tape parallel).
I read from help.sap, that we can configure this on $ORACLE_HOME/dbs/init<SID>.sap. in parameter:
compress = harware
backup_dev_type = tape
tape_address = (tape1, tape2, tape3, tape4)
tape_address_rew = (tape1, tape2, tape3, tape4)
http://help.sap.com/saphelp_nw04/helpdata/en/88/a2a041a5d4af4db168992639d65d3b/frameset.htm
My question,
If we want to backup parallel using 4 tapes, is this configuration that we need to do (init<SID>.sap) from sap side (DB13)?
Thanks and Best Regards,
Widi

Dear Mark,
Thanks for your help. actually I have one more question:
How do I restore my backup form this 4 tapes, if I'm using parallel backup?
Will the command same like I restore form 1 tape:
example:
brrestore u2013b beczqlnk.ant u2013m full
brrestore u2013a 5371-5372=/oracle/<SID>/oraarch/
Below are the paramter that I will configure:
- tape_address = /dev/rmt/0cbn
- compress = hardware
- backup_dev_type = tape
- exec_parallel = 4
- tape_size = 1600000
- tape_address = (dev/rmt/0mn, /dev/rmt/1mn, ..)
- tape_address_rew = (dev/rmt/0m, /dev/rmt/1m, ..)
Appreciate you help and suggestion on this.
Dear Venkat,
thanks for your suggestion

How to configure Broadcasting server in SAP?

Hi,
We are trying to use pre caluculation using broadcasting for queries, for this broadcasting server needs to be configured in the system...
We are using SAP-BI 7.0, Can anybody let us know the step by step solution to configure Broadcasting server
rgds,
KN RAO

Hi,
This links gives you a good idea on what broadcasting exactly is:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm
Please refer to the link below to hava a general idea on how broadcasting must be configured,you will find information specific to collaboration:
http://help.sap.com/saphelp_nw04s/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
Also check :
How to install and configure a boradcasting server ?
-Vikram

How to configure Engine/SDM for SAP J2EE Server

Hi Experts,
I deployed the EAR file on J2EE Server.
This EAR file is linked to WebModuleProject (xyz)whic has a WAR file.
This WAR file contains one JSP. (test_jsp.jsp)
Then on following the URL
<a href="http://server:port/xyz/test_jsp.jsp">http://server:port/xyz/test_jsp.jsp</a>
i m getting the following error message:
Nov 29, 2007 11:01:40 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
How do i configure engine/SDM?
What is SDM engine?

I configured the SDM/Engine successfully
but still following the url
<a href="http://server:port/xyz/test_jsp.jsp">http://server:port/xyz/test_jsp.jsp</a>
i m getting the following error
404 Not Found
The requested resource /WebModuleProject/test_jsp.jsp is not available
Details: File [WebModuleProject/test_jsp.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Please experts help me to dig out this problem
Can anybody suggest me why i m getting the error?

How to configure staggered payments in SAP

Hi Gurus,
We need to make staggered payments to our vendors against service orders
Is there a standard functionality in SAP for the same.
Please help.
Regards,
Harmees

Do a apyment request using T-code F-59
I am exactly not sure how to use this t-code, but this is how it is done

How to configure session timeout for SAP Netweaver Portal

Hi,
I would like to know the way to configure the session timeout for SAP Netweaver Portal.

Hi Kim,
the solution for your question is in this thread.
500 Connection timed out
if it is helpful award me points.
Regards,
R.Suganya.

How to configure acknowledgements in Proxy(SAP)u2013PI(7.1)u2013Jdbc Scenario

Similar Messages

Maybe you are looking for