How to Configure client 001 to logical system in trial netweaver abap?

Hi,
I have downloaded and installed sap netweaver abap trial version in my pc. I want to configure client 001 and assign it to a new logical system in it. I do not know how to do it as it is a prerequisite for BI. Kindly provide me steps to configure it.
Thanks in advance,
Regards,
Kannan

Hi
You need to follow some steps in both the systems
R3 side
http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/content.htm
BW side
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Hope it helps
Thanks,
Teja

Similar Messages

Couldn't create jco client connection for logical system

Dear Experts,
we are facing a strange issue in our custom webdynpro java application, few of our portal users are getting the "couldn't create jco client connection for logical system" for Model Data JCO Destination. below are details
1. portal version 7.02 SP14 (we have recently updated to SP14 from SP02-- is this is causing the issue ?)
1.1. updated the NWDI track with SP14 SCA files as well as added latest WD Runtime SCA file deployed the applications to Production also.
2. above said exception is inconsistent and happening for only few users
3. ping and test of jco destinations are successfull in content administration as well as in SLD, destinations were added in the SLD system.
4. cleared the JCO ARFC meta data cache in webdynpro console
5. jco destinations are configured using uid/pwd, configured user is not locked active and tested in the backend by logging in with the same user.
6. restarted the portal server
even though, we are getting the above said exception for few of portal users randomly.
Please help me on this ASAP, as i am not getting any further help on this.
Thanks,
Ram.

Hello Ram,
Check the JCo Pool Configuration settings of your JCO Destination. This message normally comes when the maximum connections has been reached. Increase the "Maximum Connections" to some number depending on the usage. A good habit is to disconnect the jco connection after executing the same in your webdynpro code if you don't want it to be synchronous.
<ModelName>.modelInstance().disconnectIfAlive()
Hope this helps.
Regards
Vijay

Assign Client to a logical system

Hi,
How can we proceed in the below case
1) Same host is r/3 and xi system.
2) client 000 is assigned to SAP AG konzern..default.
3) i create a logical system for the xi system...SAP_LS_XI, what should be the client for this logical system ? what settings do i have to make for this..
Any help is appreciated.
Regards
Ravi

If this is a brand new installation of Netweaver then you probably will use the password that you set as the "master" password. You can use DDIC / "master" pass combination to log into the new client.
Alternatively, you can go to the following location on your server:
/usr/sap/SID/SYS/profile
and edit the file DEFAULT.PFL so that it contains the line:
login/no_automatic_user_sapstar = 1
Stop your SAP system and then restart it. When you create a client with this setting it will automatically make the default login SAP* and password = pass for new clients when you create them.

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
<b> "RFC Call failed: Error Opening an RFC Connection "</b>.
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

Client Delete and Logical System and CUA

I'm getting ready to do some client clean up in prep for an upgrade from ECC 5 to ECC 6 soon.
Currently we have a 3 system landscape: DV1 QA1 PR1
Clients on these systems are as follows: (not including 000, 001, 066)
PR1:100 - the production client
QA1:100 - Integration Master - not used except for RFC connections for Solution Manager
QA1:110 - Cycle 1 testing - not used
QA1:120 - Cycle 2 testing - not used
QA1:200 - Old training master client - not used
QA1:201 - Old training client - not used
QA1:710 - no longer being used for testing
QA1:720 - client used for system and integration testing
DV1:100 - Configuration - not used
DV1:110 - ABAP development
DV1:120 - Configuration
DV1:700 - Template for test - not used
DV1:710 - Test with prod data
Most have a logical system defined for the client.
I am going to delete those I've underlined above as they are no longer used.
Some of these are setup in the CUA system.
All are showing up in Solution Manager SMSY system landscape.
My plan is to backup the system database first!
Then:
1) Delete the client(s) (SCC5) one by one
2) Remove the client from CUA (SCUA)
3) Remove the logical name (SALE)
What I am unsure about is the order of the process. Should the CUA and ALE modifications come before actually deleting the client?
Does this sound like a reasonable plan to clean up our client landscape?
Thanks in advance for your suggestions and help.
Laurie McGinley

Dear Laurie,
Order should be like below:
1) Remove the client from CUA (SCUA)
2) Delete the client(s) (SCC5) one by one
3) Remove the logical name (SALE)
More over you should delete these clients from Solution Manager also inorder not to have error message when you go to solution Manager for doing anything on that system.
Please revert back for any queries.
Regards
Shailesh Mamidwar

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

How to get RFC Destination and Logical System name dynamically

Hi all,
I have a RFC FM written in CRM. I need to call this FM in R/3. So, i use the syntax " Call function <func> destination <destination name>. My problem is that i need to fetch the destination name dynamically..
There is a way to do so in CRM which is as follows:
DATA: lt_siteselect TYPE TABLE OF siteselect INITIAL SIZE 0,
           ls_siteselect TYPE siteselect.
CALL FUNCTION 'SMOF0_READ_SITESELECT'
    TABLES
      to_siteselect = lt_siteselect.
READ TABLE lt_siteselect INTO ls_siteselect
         WITH KEY sitetypeid = cl_smw1_siteprovider=>c_sitetype_r3oltp.
The above piece of code returns the site and also takes care of the client you are currently working on. But the specified FM is present only in R/3..
I want to achieve the functionality fulfilled by the above code in R/3.
Kindly help.
Useful answers will be rewarded.
Thanks in advance,
Karan Merwana
I can not use FM LOG_SYSTEM_GET_RFC_DESTINATION as for that i need to provide the logical system name. And the logical system name would be different for different clients.
Message was edited by:
        Karan Merwana

For those referring this thread later, I could not find a solution to this and ultimately had to do away with hardcoding of system names based on the DEV, Q, and PROD system names.
If anyone does manage to get a workaround, please let me know.

How to change name of a logical system

Hi SDN,
I am trying to customizing intial download data transfer from ECC to CRM. But in outbound queue of ECC it is showing an error of SYSFAIL with description of logical system name changed. Given note 558701.
But I don't know old name of logical system.
1) Can you guys please help how to find the old logical system name there are many logical systems defined in my system.
2) and how to change it?

Hi Ravi,
Since logical system name is changed sombody in past must have ran BDLS to conver logical system name.
Check tcode SLG1, this tcode will tell you whether there were any logical system conversion done in Past, if it is done then it will tell you from which old logical system its converted to new one. So you can find out old logical system name.
Once you find out old logical system run BDLS again. It might possible BDLS ran unsuccessfully last time.

How to configure Dotmatrix Printer in local system

Hi,
I need to configure DOT MATRIX Printer in Local System in ECC6.0. please give steps how to configure.
Thanks,
venkat

This is not more different than other printers.
check
http://help.sap.com/saphelp_nw70/helpdata/EN/7e/36e4c4023411d399b70000e83dd9fc/frameset.htm
Markus

How to map IntegrationProcress to ALE Logical System Name

Hy,
i'm triying to send an Idoc from my IntegrationProcess MY_IP
to out Backend SAP System XX1.
Konfiguration has been done with an valid ReceiverAgreement.
But neverless i got the following error:
"Sender Service MY_IP cannot be mapped to an ALE Logical System"
1. Where do i specify this Mapping? (I tried Header Mapping ReceiverAgreement
without success)
2. In my message mapping EDI_DC40 has mandatory fields like RCVPRN.
But hardcoding the Receiver here cannot be the solution. Do the value
i map there do have any effect at all?
Thanks in advance.
Gunnar

Hello Nilesh,
you're right - now it works. I just defined any LS and SID. No the IDoc runs into the system, but cannot be processed since the originator is unknown. But this can be solved now with SALE and we20.
To be honest: there are so many blogs concernig this case. But i didn't find any which explains why the behavior is different when you send an IDoc from an Integration Process and what happens behind the scene. In the documentation
i didn't find anything at all...
Thank you very much.
Gunnar

How to configure Use tax in the system

Hi ,
As in use tax , the tax amt should be paid by the buyer to the govt... we r using taxware... so let me know how to configure the tax codes.. normally the entries will be expenses dr, tax dr and the full amt will go to vendor cr.... but here the vendor amt should be exclusive to the tax amt.... please let me know the process..
Thanks

Hi,
Muscan in this scenario whenever you are posting the invoice for the vendor you may get the field called EDITING OPTIONS from there u can select check box of calculate taxes on net amount in the general entry options tab.
I hope it will helpful to you................

How to configure a P2000 MSA Array System Dual I/O - Help Needed

Hi, Tried to install a new HP P2000 MSA for a client today. We are connecting the P2000 directly to SAS Card in our HP Server.
Installed 2 x 3TB drives no problem. Drives show up in the BIOS and in VSphere no problem.
We want to setup a new RAID 1 array using the new SAN. I assumed running the array config (F5) on boot would allow me to create the array, but HP Smart Storage does not see the new device or drives.
I spent hours looking online for assistance. Any HP docs mention connecting to the SAN by CLI or Ethernet port. Neither of which we have on the SAN. We have two separate IN/OUT SAN connections which we have connected to our SAS card in the Server. I have also seen suggestions to use the SMU to configure RAID in the new array. Again, I cannot see how to access or run the SMU.
How can we configure RAID on the device if the HP SMart Storage software cannot see the device. Completely stuck here so any help appreciated!
Thanks.

Hi:
You may also want to post your question on the HP Business Support Forum -- Storage Area Networks (SAN) (Small and Medium Business) section.
http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN-Small/bd-p/bsc-257#.VQoKWDgtHGg

B2 001: Local logical system is not defined

Experts,
I am new to SAP Installation.
I have created Purchase Orders in a newly installed IDES 6.0
It does not appear on the system immediately after saving. I had to go to SM13 to repeat updates before it can appear in ME23N.
I have even gone to SCC4 to edit the client settings to allow changes automatically. I still cannot see an improvement.
Is there anything I am doing wrong?
Do I need to reboot the server?
I posted this in NetWeaver Forum but was told it is the wrong forum.

Garapati,
Read SAP online help at
http://help.sap.com/erp2005_ehp_06/helpdata/EN/aa/b4b13b00ae793be10000000a11402f/frameset.htm
I also suggest that you read the notes cited by expert Jürgen.
Best Regards,
DB49

How to Configure client 001 to logical system in trial netweaver abap?

Similar Messages

Maybe you are looking for