How to configure E Recruiting in portal.

Hi
After installing ESS and MSS in ( ECC600 & EP 70).
How to configure E Recruiting in portal.
Thanks & Regards
Daya

Hello Daya,
BP deployment is done via using JSPM by your Basis consultants.
Download the BP package from this [link|https://www.sdn.sap.com/irj/sdn/contentportfolio]
http://help.sap.com/saphelp_erp2005/helpdata/en/9e/fc4686de064279b5e5476d40734427/frameset.htm
Also, [check this|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/mss-e-rec%2bconfiguration] for confugration of E-recruitment for webdynpro Java version.
Regards,
Anil Kumar

Similar Messages

How to configure KM in federated portal network

Dear Friends,
Can anyone help me in configuring KM in federated portal network. If KM is configured in producer portal how to make use of that KM content in consumer portal.
Is it possible to directly configure KM in consumer portal?
Please help me out.
Thanks & Regards
Sireesha.

Hi Sireesha,
1) In order to use all capabilities provided by Knowledge Management, the
recommended solution would be to use KM only on one portal in the federation.
This could be the central consumer portal or alternatively one of the producer
portals. Then all features, like versioning, taxonomies, approval workflows,
subscriptions, template-based publishing will be available in this portal.
2) In case KM has to be federated to different producer portals, KM iViews (e.g.
Document iViews, Navigation iViews) could be integrated with the content sharing
modes provided by FPN. However, this is not a deep integration, because only a
redirect to the remotely located iViews is performed. The services themselves, like
taxonomies, will not be available in the consumer portal.
The recommended approach is to Configure KM on Consumer Portal only or Producer portal only.
Regards,
Shailesh Nagar

How to configure file server with portal using KM

Hi
i have some word documents,excel documents in my computer.i want to integrate these documents into portal using KM.how to do that?can anybody suggest the steps involved or tutorial to do this configuration.thanks for your help in advance
Prasad

Hi,
It´s very simple to do that.
1.You must create repository. (I gave you this information).
2.Create portal users. (in portal or read from ldap)
3.Create KM navigation iview to point folders in your repository.
4.Create roles.
5.Assing roles to users.
For you that is new in this tools, perhaps needs 3 or 4 days.
Patricio.

How to configure collaboration services in portal??

I am new to the collaboration stuff, i have standard collaboration requirement where the user has to create the room and chat with other employees.
I have followed the below link to do collaboration minimal configuration
https://help.sap.com/saphelp_nw73/helpdata/en/4c/1739c53f823de4e10000000a42189e/content.htm?frameset=/en/4c/169b4b37360da0e10000000a42189e/frameset.htm&current_toc=/en/36/4b6fb2265e4afda9b5f8c3895d9807/plain.htm&node_id=6&show_children=false
Can anyone put some light on me how to proceed???
What are the basic things i need to check that collaboration is configured or not??
How to crate create room and provide chat functionality??(Can i copy the standard room creation iview to my custom role)
Regards,
Mahesh

Hi Samuli,
Thanks for the reply.But the sap link says we have to create the system object using the PAR file com.sap.netweaver.col.appl.gw below is the link
https://help.sap.com/saphelp_nw73/helpdata/en/46/38d346e9f34dfc92bfebacde85cd43/content.htm?frameset=/en/a4/7b7c04c8f8d24783552493fc3a0327/frameset.htm&current_toc=/en/36/4b6fb2265e4afda9b5f8c3895d9807/plain.htm&node_id=13&show_children=true#jump18
And i came to know that their is no option system from PAR option in portal 7.3, after some seraching i found the below link
http://help.sap.com/saphelp_nwce711/helpdata/en/45/26d6a3522b4c2de10000000a1553f6/frameset.htm
Finally i requested my basis team for the com.sap.netweaver.col.appl.gw, but they are saying there are no PAR files in the EP server.
Where can i found the com.sap.netweaver.col.appl.gw PAR file ??
If PAR file does not exist whats the alternative SAP provided for email connectivity in collaboration??

How to Configure Exchange server in EP6.0

Hi
How to configure mailing server in Portal
With Regards
Azhar

Hi Azhar
You can specify your mail server on the Portal.
Go to System Administration -> System Configuration -> UM Configuration.
You will find a field there to specify your mail Server.
You may also have to specify this in the config tool of your WAS Server to enable email notification
Take a look at <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm">this</a> .
Hope that helps.
Best Regards
Priya

How to configure mail using portal collaboration

hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamal

Hi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas

How to configure security policies like account locking, account expiry in portal application?

Hi All,
Can anybody pls tell me how to configure security policies like account locking,
account expiry in portal application? By default, it has a 30 minutes lock period
after 5 retries. But if I want to set other values or want to unlock account of
a user, then what to do ?
TIA,
Sudarson

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure GB P60s in the SAP Portal?

How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

Hello
Please refer SAP note 1542870 -Electronic P60 ,where HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana

How to configure Apache/Portal to service 2 separate groups of users

Before someone say this is a Portal issue - please read on.
I would like to know how to configure Portal to service 2 separate groups of * Internet * users (A and B) all within the same installation so that when a user enters www.aaa.com or www.bbb.com that user is directed to a public page for that group only.
Currently, when a user of either group enters www.aaa.com or www.bbb.com they arrive at the same public page where they can click on a link and goto their respective private pages (SSO Protected) after logging in.
My installation facts
infra - host1.mycompany.com
portal - host2.mycompany.com (www.aaa.com and www.bbb.com are pointing to this host)
j2ee - host3.mycompany.com
I have configured web-cache to listen on port 80 and direct all requests to host2.mycompany.com:7778.
I used RedirectMatch within host2 httpd.conf to redirect any request to the portal public page.
I wondering if it is possible to read the "IP NAME" and do a RedirectMatch on it. In other words when a request come into the Apache listener - is it seeing an IP address request or an IP name ie "www.aaa.com". Because if it is - then there may be some way to redirect based upon that. My assumption is the "http://www.aaa.com" cannot be read by RedirectMatch - only the portion after "http://www.aaa.com/mypage" ie "mypage.
Any help is appreciated!
Bill G...

I don't think the issue is one of Apache (not even sure it's one of named virtual hosts since you want both sites to serve the same content). The issue is one of having multiple .local names point to the same machine.
I don't know this can be done without your own DNS server running in the network.

How to configure to use Strut 1.2 in weblogic portal 10.3.2

I am new in weblogic portal, now i need to develop Strut portlet version 1.2. But I don't know how to configure it in weblogic 10.3.2 and i can't find document for how to configure Strut 1.2 to work on weblogic portal 10.3.2. I added relation libraries and configure like in weblogic document of oracle. But it's can not run and throw some exceptions like : can not render jsp file. Someone can tell me how to configure Strut 1.2 to develop Strut portlet ? Thanks in advance!

This would be a good place to start:
http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14243/integrate.htm#BABBEHCH
Brad

How to configure field value in Recruitment (PB) ?

Hi,
I would like to configure drop down list value for the fields in Recruitment (PB), for eg: PB40 - Initial entry of basic data.
Also, I would like to know how to configure the screen layout for PB40 also, is it through SPRO or something?
Thanks.
Moderator Message: Not an ABAP-related question. Please ask in the relevant forum - HCM
Edited by: kishan P on Oct 5, 2010 1:13 PM

If the value tables are customised the F4 help comes "automatically".
How to customize can be found in the HR forum.

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

How to configure the ESS portal in ehp 6 server?

Dear All,
Pls advice me how to configure the ESS portal in my client server?
I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
Thanks and Regards,
Pradip

hi pradeep ,
which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
REFER Below............
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true

How to Configure CUA of SAP R/3 system to Portal System.?

Hi,
can you please explain how to configure CUA of R/3 to UME of Portal

Srikanth,
It depends how is your landscape desigend befor you proceed with CUA, there are many points which you have to consider. refer these liknk.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/68ff407765ed6fe10000000a1550b0/frameset.htm
Cheers,
Shaym

How Can configure pop3 e_mail in enterprise portal

how Can configure Pop3 E_mail in enterprise portal

Hi,
Please follow the links below
E-Mail to Outlook Express from SAP
How to receive emails
http://www.tamboly.com/SAPEmailConfiguration.html
http://www.sap-img.com/basis/basis-faq.htm
Regards,
Manish

How to configure E Recruiting in portal.

Similar Messages

Maybe you are looking for