How to configure mail for multiple domains

Hi There:
I am the only Admin for a Mac Mini Lion Server, I have 3 Domains that I host, the DNS is done separate along with all records.
I was able to get the Web Sites up and running.
I need help to set up Separate E-Mail Accounts for each Domain, so each Domain receives it's own mail.
Will you please give a hand, I am a beginner
Thank YOU!!! in advance!!!!

There is no default for those entries. you need to set it up manually by using the custom label.

Similar Messages

How to configure Mail for exchange to select autom...

I have an E71 with a corporate Mail for Exchange mailbox, the menu allow me to configure the connection Access point manually only. So, by default I select the G3 cell phone connection, but while I'm at home the nokia E71 onnects to my DSL wifi connection but Mail For Exchange cannot switch automatically to it ?
is there a way to configure that automatically ? switching from low cost connectivity access point automatically when repliacting with the exchange server ?
I'm running with Mail for Exchange version 2.09.158
Many thanks in advance

There is no default for those entries. you need to set it up manually by using the custom label.

How to configure Mail for business contacts?

How can I configure Iphone 4S Mail to include default spaces to enter business phone, business fax number, and business address?

There is no default for those entries. you need to set it up manually by using the custom label.

How to configure mail for web proxy ??

Hi, i need help urgently!pls..everyone
how can i configure pop3 and smtp on the Sun One proxy server? I've configured wingate which has a pop3 and smtp service but i can't seem to find one here in the proxy server? can anyone help me please???

There is no default for those entries. you need to set it up manually by using the custom label.

How to configure mail for att?

I am trying to configure my new IMac apple mail program with an att mail account, please refer me with any link that works well.
Many thanks

There is no default for those entries. you need to set it up manually by using the custom label.

Configure TES for mutiple domains

TES Version: 6.0.3.260
Currently my TES is only set up for one domain, is there a way to configure it for multiple domains so I can add other users?

You can have one domain per CM, so adding more CMs will get you more domains to authenticate against. You can set up LDAP groups within this one domain, but that is it.
Multiple domain support per CM instance is a feature that will be added in 6.2 of the product, scheduled to come out in a few months.

How to configure N9 for push e-mail?

Does anybody know how to configure N9 for push e-mail? It should be possible because push email is part of Nokia's N9 official specs but I'm unable to find any reference in the manual or online.

I know that I am late to the party but just got my N9. The push email works fine for my Exchange & my Gmail but for my mail.com account (which I believe is really AOL) it only syncs when I manually tell it to. I have it set to "always up to date" ... does anyone have any ideas?
Thanks!
Update: just fixed it myself but in case it helps anyone I turned on the Push Notifications & that did the trick. Which is kind of odd bc I notifications from my Gmail & MS Exchange automatically did it but I guess that feature has to be turned on for this email.
Wish all the features on the N9 had the "I" icon which you could press for more info as I thought that option would just let you know when your email was syncing (like the little arrow on the top right). Oh well - now if I can just get my contacts/calendar off of my PC's OutLook & onto my N9 ...................
Cheers!

How to configure Mail to use different ports for POP and SMTP?

I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.

Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots.

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

Sending mail through multiple domains with iMS

I have iMS configured and working fine for multiple domains (users are
members of multiple domains). I have done this with a main email address
(main.com), and alternative email addresses to the other domains (alt1.com,
alt2.com...) so that there is one central mail location at (main.com). This
works great for receiving emails.
However, when I send email I would like to be able to show the FROM address
being from one of the alternate domains (alt1.com, alt2.com...) rather than
the main domain (main.com) sometimes. I have authentication turned on for
the sending messages, and users are logging in as ([email protected]). I assume
there is something I can add that will allow this to happen as long as a
valid address exists on my server. Any thoughts?
main domain: main.com (All mail is addressed from this domain)
alt domains: alt1.com, alt2.com...
Thanks in advance, Chris

BTW I am using iMS 5.1.
-Chris
I have iMS configured and working fine for multiple domains (users are
members of multiple domains). I have done this with a main email address
(main.com), and alternative email addresses to the other domains(alt1.com,
alt2.com...) so that there is one central mail location at (main.com).This
works great for receiving emails.
However, when I send email I would like to be able to show the FROMaddress
being from one of the alternate domains (alt1.com, alt2.com...) ratherthan
the main domain (main.com) sometimes. I have authentication turned on for
the sending messages, and users are logging in as ([email protected]). I
assume
there is something I can add that will allow this to happen as long as a
valid address exists on my server. Any thoughts?
main domain: main.com (All mail is addressed from this domain)
alt domains: alt1.com, alt2.com...
Thanks in advance, Chris

DNS for Multiple Domains

I am trying to figure out the proper configuration for DNS that will support multiple domains. I have DSN working now for just one domain.
My XServe has a static IP connected directly to cable modem and is the master nameserver. I also have an Ubuntu server with static IP connected directly to cable modem that is the secondary (slave) nameserver.
On the XServe, I currently have a primary zone created for domain1.com. with:
* an A record for domain.com. (Fully Qualified) and the same static IP as the XServe
* an A record for ns1 (not fully qualified) and the same static IP as the XServe
* Aliases for ftp, www and mail (not fully qualified) mapped to destination ns1.domain1.com. (Fully Qualified)
Nameservers under the Primary Zone is ns1.domain1.com. and Mail Exchangers is ns1.domain1.com. with a priority of 10.
The reverse zone is getting created appropriately for me as far as I can tell. I am able to access www.domain1.com just fine as well as mail and ftp.
Now I want to add a new domain2.com to this master nameserver. I know that I will need a new Primary Zone for domain2.com. to be recognized and to setup it's aliases?
Can I use the same static IP or do I have to have a unique static IP?
Can I use the ns1.domain1.com. nameserver or does the new domain2.com need new nameservers?
Does domain2.com have it's own A records?
Does the mail exchangers need to be different for domain2.com?
It seems like all the documentation and information that I can find are just for configuring one domain and not so much for multiple domains. Any help would be greatly appreciated.
Spotted Dog

Don't think of subsequent domains as being any different from the first domain.
For every domain you need to provide certain information, including a list of the hostnames within that domain. There is no relationship between 'www' in domain1.com and 'www' in domain2.com (unless you point them to the same address, but that's a different issue).
Any host record in the zone can either be an A record (where you specify an IP address) or a CNAME (where you specify another hostname that it maps to).
In the case of your web server handling both domains you could set 'www.domain2.com' as an A record with the appropriate IP address, or you could set it as a CNAME with a value of 'www.domain1.com.' (essentially saying 'www.domain2.com has the same IP address of www.domain1.com, so go find that address').
It's also possible to use cross-domain records for things like name servers and mail servers - in other words you can set your MX record for domain2.com to mail.domain1.com (essentially saying that domain2.com's email is handled by mail.domain1.com).
Can I use the same static IP or do I have to have a unique static IP?
That's not a question for DNS. What you're defining are the hostnames in that domain. If you have one server (e.g. a web server) that can handle multiple domains (e.g. one apache server handling web traffic for both domain1.com and domain2.com) then, sure, you can use the same IP address for both.
If, on the other hand, you have specific services that cannot be multi-hosted (e.g. HTTPS) then you will need different IP addresses.
Can I use the ns1.domain1.com. nameserver or does the new domain2.com need new nameservers?
Sure, it's entirely possible to use domain1.com's name servers for domain2.com.
Does domain2.com have it's own A records?
It can do, or not, as you choose. If you're running www.domain2.com on the same server as www.domain1.com then you could use a CNAME record to point www.domain2.com to www.domain1.com.,or you could set an A record with the same IP address.
The result would be the same, but the CNAME has the advantage that if your IP address changes you only need to change your DNS in one place (www.domain1.com) and all the other addresses would automatically follow.
Does the mail exchangers need to be different for domain2.com?
Not at all, if your mail server is configured to handle mail for both domains it's entirely possible to specify mail.domain1.com as the MX record for domain2.com.

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

How to configure Mail Services in B1

Hi All,
I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
Thanks & Regards
pankaj Sharma.

Hi Pankaj Sharma,
The suggestion above would be a good solution to you. However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
Thanks,
Gordon

How to configure mail using portal collaboration

hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamal

Hi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas

How to Configure Mail in ECC5.0

Dear All,
Please guide how to configure Mail in ECC5.0
i have Activate / enabled SMPT using the T-code : SICF
using Transaction : SCOT
for SMTP Connection :
mail host : localhost
mail port : 25
Code Page : ???????????? what should i give i have given 1100 SAP internal (correct or wrong) Please guide
Supported Address Type:
Selected Internet
what should i give in "Address Area" and "output format for SAP documents"
when i am sending a mail using : SWBP and checking in SOST message error 272 i am getting.
Regards
Shankar

Dear all,
we are not using Exchange Server.
we enabled the Port 25 . we are able to telnet to the mail server.
Using SICF activate SMTP port.
when i am trying to send using SBWP t-code : getting
"error during send process " when we check further " you do not have a sender address in the choosen communication method".
Regards
Shankar.

How to configure mail for multiple domains

Similar Messages

Maybe you are looking for