How to configure satellite system in Solution manager

Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
Asif

Hi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar

Similar Messages

  • System Monitoring for Satellite System in Solution Manager

    Hi,
      I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
    Thanku

    Hi,
    In Solution manager I did below steps. :
    1)  Activated background dispatching in Rz21 (Client : 000).
    2)  Created CSMREG user (In RZ21)
    3)  Generated the configuration file for agent (CSMCONF).
    I down loaded the ccmagent_35-20001346.sar file.
    What are the steps i have to do in satellite system.
    Thanku

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • How to configure maintanace optimizer in solution manager

    Hi,
    How to configure maintanace optimizer in solution manager.
    Regards,
    Asif

    Hi,
    Check this link... it has complete step by step configuration of Maintenance Optimizer...
    https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
    http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
    https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
    Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
    Thnx,
    Waseem.

  • How to configuration Maintenance Optimizer in Solution Manager 4.0?

    Hi All,
    Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
    If any one having the document for same then please give me.
    My mail id is : - <email address removed by moderator>
    Thanks a lot,
    Harshal

    Hello Harshal,
    Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
    Another document is attached in Note 990534.
    If you have further issues, Note 1024932 might be a good starting point.
    Best regards,
    Victor

  • Monitoring a non-SAP satellite system in Solution Manager

    Hi Folks,
    I have two quick questions.
    1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
    2.)  What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
    Background:
    - My Solution Manager system is a NW70 EHP1
    - Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
    - I have my CCMS agents registered back to my CEN for the ABAP and Java systems
    Satellite systems:
    - Multiple Wintel servers (both IA32 and x64) that are running;
      o standalone SQL server databases
      o BOE/BOBJ
      o BPC for Microsoft
    Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
    My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
    Thank you,
    Bill

    Dear William,
    Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
    You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
    Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
    I hope this information is helpful.
    Regards,
    Paul

  • Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

    Hello!
    Can enybody help?
    We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
    After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
    Does anyone know how to generate iBase for all systems in solution?

    Hi,
    There will be only one iBase for a solution.
    Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
    regards,
    Ram

  • How to remove Production System from Solution manager.

    Hi All,
    We have Three system landscape and solution manager installed.
    All the system are managed by Solution manager.
    here we are looking to remove the Production System from Solution manager.
    as in case if is there any problem in solution manager then we are not dependent on it.
    things will work directly on Production system.
    Could you please let us know the procedure to remove the system from solution manager.
    Please let us know if is there any document provided by SAP.

    Hi,
    Have you implemented charm,ccms monitoring or any other functionalities?
    if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
    Does your production system data coming from SLD?
    if yes, Delete the entry from SLD
    if both the answer is no.
    1.delete  RFC from SOLMAN to the production systems.
    2. delete the production system using SMT2 transaction.
    3. Remove system rom SMSY from SOLMAN.
    Thanks,
    Jansi

  • Activated SDCCN on Satellite System not Solution Manager

    I activated SDCCN on a satellite system instead of Solution Manager and need to find out how to treat Solution Manager system as the "master system" (basically point the satellite system back to the Solution Manager system). 
    Also, do I have to activate SDCCN on the Solution Manager system itself?  The documentation is vague here.

    1] In the satellite system go to tcode: SDCCN
    In the menu Goto -> Settings -> Task Specific
    In the settings for RFC-Destinations you can choose to which Solution Manager (master) the data will go.
    2] If i'm correct, you don't have to activate SDCCN on the Solution Manager. Just create a service in tcode: DSWP (Operations, Solution Monitoring, EarlyWatch report)
    (If you get an error session overdue, check answer on this Early Watch Alert Configuration))

  • Connection From Satellite System to Solution Manager for key users

    Hi All,
    Can anybody suggest which RFC connection/destination should be maintained in BCOS_CUST table under satellite system to connect to Solution Manager.
    1. SM_SSMCLNT010_TRUSTED
    2. SM_SSMCLNT010_BACK
    I don't want user to Login to solution manager while creating a support message. They should create a support messsage seamlessly from satellite system.
    Any help is greatly appreciated.
    Thanks...

    Thakur,
      Sorry for the cryptic answer back there - read it myself and it didn't make much sense to me either so here we go with the seamless way to allow users to create service messages.
      There are 2 ways to do this - 1 way is to use a connection like the 'BACK' connection but if you do this - all user tickets entered will have the username of the 'BACK' connection logon id as the message creator.  The other way is to use the trusted connection so the userid of the person logging the message is transfered with the created ticket.
      I will assume that you want to preserve the unique userid and use trusted connections. So here we go:
    Step 1 - Go into BCOS_CUST on the Satelite and put in your TRUSTED RFC Connection as the detination for the Service Messages - either use the one that Solman created when generating or make your own ABAP Trusted Connection.
    Step 2 - All users in Satelite and in Solution Manager need to have Authority Object S_RFCACL assigned to their userid's so they can use the Trusted RFC Connection (this is not in SAP_ALL or SAP_NEW).
    Step 3 - All users that will use this method of creating service tickets need both a userID and a BP with the respective system keys to allow them to enter tickets for those Satelites.
      That is all there is to it assuming that all issues with Trusted Connections have been worked through already (test this in SM59 by going to your 'TRUSTED' connection on the Satelite and execute the RemoteLogon button - you should be sent to the Solution Manager with out having to logon).
      If this answers your question, please set this message to answered.
    Edited by: David Milliken on Jan 25, 2008 1:55 AM

  • Configuration of CCMS through solution manager

    Hi,
    I am trying to do first time the  configuration of CCMS auto alerts through Solman EHP1,I mainted the satellite system in solution manager.mine environment is linux with maxdb.how to proceed for the same to start.
    Thanku

    Hi,
         Thanks for inputs.
    1) Created the  CSMREG User in Solman system
    RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG User
    2) CSMCONF Start File -- in Solman system
    RZ21 -->Technical Infrastructure --> Configure Central System -> Generate Configuration File for Agents (I saved the CSMCONF file)
    3)I downloaded the CCMAGENT_7-10005984.SAR file from service.sap.com ,from here onwards iam bit confusing how to proceed for the same.  (Iam having this directory in satllite system  /usr/sap/TST/DVEBMGS00/log/sapccm4x)
    Thanku

  • How to create Rfc for EP system in Solution manager

    Dear experts,
    I am doing ChaRM configuration for my EP system ( java only).
    I also configured CTS+ successfully but we want to integrate this with Chram in solman.
    I have done all configuration according to standard doc for ChaRM.
    But when creating project from solar_admin it is giving "   NO RFC for DEP system"
    so please suggest me how to create RFC for java system in Solution manager.
    thanks in advance
    dhiraj

    Hello,
    You need to setup an ABAP communication client and system, that's done through the TMS settings:
    For source system:
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA  (others for a MDM system)
    - NON_ABAP_SYSTEM                          1
    - COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
    - NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
    - WBO_GET_REQ_STRATEGY                 TAGGED
    - WBO_REL_REQ_STRATEGY                 MANUAL
    For quality and production Java system (target systems):
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
    - NON_ABAP_SYSTEM                         1
    - COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
    - DEPLOY_WEB_SERVICE                       CTSDEPLOY
    - DEPLOY_DATA_SHARE:
    When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
    When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
    Best regards,
    Miguel Ariñ

  • How to add EP(DEV and QAS and PRD systems in solution manager)

    Dear Gurus,
    I want to include EP dev and qality and prodution systems in solution manager .
    While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
    How to see developmnet and quality systems in maintenace optimizer.
    Same thing for ECC also.
    ECC dev and quality systems installed in the same server.
    In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
    Can any body help this probelm.
    Thanks & Regards
    Rao.

    I think you need to adjust your filter settings in the initial screen of MOPZ.
    It's in the right top corner.

  • How to check the messages in solution manager?

    hai experts !
    how to check the messages in solution manager?
    in which transaction do we see them?

    Hi Kiran,
    From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
    If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
    For more specific answers, please provide more description of what you are looking for.
    Trust this helps.
    Regards,
    Srini

  • Add sap R/3 enterprise system in solution manager SLD

    Dear All
    Required solution manager configuration documents.
    We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
    And during the installation of solution manager I select u201CConfigure a Local SLD u201C
    Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
    Who to Configure SLD Bridge ( in SLD Server ) ?
    in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
    and how to Verify that my system is connected and working fine With SLD
    Please help me regarding u201C configuration solution manager u201C
    Regards
    Shahid

    Hi
    Visit for step by step details of Standard Configuration of Basic Settings
    http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
    http://www.wilsonmar.com/sap_solution_manager.htm
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    Regards
    Uday

Maybe you are looking for

  • AEBS Remote USB AirDisk Access

    First off, it was extremely nice to find out that after shelling out £139 for a router, i also had to shell out another £50 for a compatible modem as the AEBS does not support PPPoA connections, and the bog standard modem does not bridge PPPoA to PPP

  • Pasta 3.0 - Printing Purchase Order Forms using Pasta

    Has everyone successfully gotten the Pasta utility using the PrintForm functionality to work for printing Purchase Orders in a 11.5.8 environment. We have applied the latest Pasta patches for 3.0.4 and has created a postscript file from a msword docu

  • Can I make my web page stretch and shrink to fill different sized browsers?

    Hey team, I just built my first site in iWeb: www.dylanjamesgeorge.com I'm using iWeb version 3.0.2 I set the page width to 1200px because that's what looks best on my screen, however when I look at the site on a larger or smaller screen it doesn't l

  • Question about Sennheiser headphones for my Zen Ph

    I just bought these Sennheiser headphones (CX 300-S) for my Zen Photo and when the lights are on I get a buzzing noise but when the lights go off the buzz is gone. Does anyone have any clue why this is? The headphones cost me a pretty penny and they

  • Converting PDF to LiveCycle PDFs

    Our firm uses LiveCycle PDFs to perform data merge activities.  We have well over a 100 PDFs that need to be converted to LiveCycle for this data merge activity.  Right now, the conversion to LiveCycle is where someone opens the PDF and saves it as a