How to configure WLS to send HTTP access log to syslog under Solaris?

I understand there is a way configuring WLS to use syslog via log4j. Is it possible only to direct HTTP access logs to syslog and keep the rest of logs in normal log files? Thanks!

I've been following the "How to do UD Document" https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff and more specifically the document for Sybase https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0d70315-958f-2a10-bc88-eb91e36f4037
I am using the latest .jar file from Sybase http://www.sybase.com/detail?id=1002257
When I navigate to http://<hostname>:50000//TestJDBC_Web/TestJDBCPage.jsp and Select connection name SDK_JDBC I get the following error message:
Could not connect to database. Connection is inactive or does not support JDBC
com.sap.ip.bi.sdk.exception.BIConnectionFailedException: Cannot open the connection
Caused by: com.sap.ip.bi.sdk.exception.BIResourceException: Class DriverName is not found
Caused by: java.lang.ClassNotFoundException: com.sybase.jdbc2.jdbc.SybDataSource
Found in negative cache
Loader Info -
ClassLoader name: [connector:default]
Parent loader name: [Frame ClassLoader]
library:SYBASE
Resources:
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.sapq/connector/connectors/bi_sdk_sapq.rar/bi_sdk_sapq.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.jdbc/connector/connectors/bi_sdk_jdbc.rar/bi_sdk_jdbc.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/cafbwadapterassembly/connector/connectors/cafbwadapterassembly.rar/sap.comcafbwadaptercaf.bw.adapter.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.xmla/connector/connectors/bi_sdk_xmla.rar/bi_sdk_xmla.jar
Loading model: {parent,references,local}
Any thoughts/insites?
Thanks, Steve

Similar Messages

WLS http access logs not written to when starting WLS instance using nodemanager

When starting managed WLS instances using node manager the HTTP access logs are
not written to (the WLS log in the same directory is written to). All other functionality
of the WLS instances seem to operate just fine when started using node manager.
When we start the same managed WLS instances using a start-up script the HTTP
access logs are written to.
===
How can we get HTTP access logs to be written to when starting a WLS instance
using node manager?

I think I know the answer to this one!
I got bitten by the same bug (at least I think it is a bug). Check the location
specified for the HTTP-access log for your server instance. It is probably a relative
location, right?
According to the docs, relative paths should start from the Root Directory (see
your Remote Start config), but it seems like the BEA-programmers forgot to retrieve
the Root Directory and instead blindly writes to the process' current working
directory (CWD).
And when started by the Node Managet, the CWD = WL_HOME/common/nodemanager.
If you are as paronoid as I am (and you should be too), that directory should
not be writeable by anyone. Because my BEA installation was owned by 'bin', and
the processes run by 'beawls', I got an error message in my NM-logs pointing to
the problem. In your case, you are probably running NM as a user that has write-access
to your NM-home, and all your missing HTTP-access logs are deep, down there.
Jan Bruun Andersen

How to configure JDBC Adapter(Sender & Receiver)

How to configure JDBC Adapter(Sender & Receiver)
Rgds
Ruchitha

Hi ruchitha thakur ,
These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
JDBC is a technical Adapter provided by SAP.
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
SAP XI Utilize SAP Adapters to connect to heterogenous systems
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
cheers!
gyanaraj
***Pls reward points if u find this useful

How to configure website address to http request

hi
How to configure website address to http request
(I want access JBOSS URL: http://localhost:8080/HIS/Login using website like www.HIS.com)
Please help me.

What I'm trying to do is connect my laptops built in wifi adapter to my home network and connect my usb wifi adapter to my phones hotspot then combine the bandwidth into one stream so that my speed is faster.

Extending HTTP access log file

I am trying to extend the HTTP access log file using the information given at http://e-docs.bea.com/wls/docs81/adminguide/web_server.html#113868
However, I havent been able to succeed in doing that. I have written my own class
authType.java to display that information in the log file. I compiled the class
and placed it under the lib directory thereby guaranteeing that it will be loaded.
However, the log file only seems to place a '-' at the location where it should
have actually placed the contents of the method getMethod().
Help will be appreciated.
[authType.java]

Not at the moment. We are working on adding a property in an upcoming
release.
This is documented at:
http://www.weblogic.com/docs51/adminhelp/AdminPropertyHelp.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Sean Scott <[email protected]> wrote in message
news:8fhpl1$50t$[email protected]..
Is there a property to set the max size of the http access.log file?

Nothing being written to http access log.

I added a custom field for extended logging, turned extended logging on and I know that the class is being invoked and the log method is being called. However my access.log is empty.
what gives ?! I dont quite know how to debug this one. short of crawling through thedebugger

Hi,
What you can do is to set the buffer-size-kb parameter value to "0" in config.xml so that it can start logging once the server starts coming up rather then waiting for the default size which is 8kb to pass.
Something like below:
<web-server-log>
<buffer-size-kb>0</buffer-size-kb>
<web-server-log>
For more details check the below link:
Search for: CR302493
http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html
Hope this helps you.
Regards,
Ravish Mody

How to track browser type in the access log

I have looked through the documentation on logging features on how to log the browser
type for visitors. Is there a straightforward way to do add this information
to the access.log?
We are using Weblogic Portal 7.0 sp4
Thank you.

Hi,
What do you mean by current and old version? Any changes in history log under general settings-->service tab?
Thanks & Regards,
Nagarajan

HTTP Access logs

Hi!
          Has anyone created custom field identifiers?
          I created a class for my custom field to access.log file and I changed the
          file
          so that it's in Extended Log Format.
          I placed the class file to classpath what the server uses when it starts up.
          Put it still do not work!!
          And the documents are useless...
          -Jussi Pöri


Change "X-<class_of_extended_field>" to "x-<class_of_extended_field>".
Andrzej Derlacki
[email protected]

Access log trimming/rotation under UNIX - is there a way?

It doesn't look like there is access log rotation in version 5.
Why not?
- igor
Steve Ingram wrote:
We are running 4.5.1 under Compaq Tru64 Unix. Is there a method log access
log rotation or trimming available without stopping the server?
If I have to shut it down, it takes about 30 seconds to shutdown and then 2
minutes to come back up (some EJB's do a lot of cache building 90 secs) This
is unacceptable in a production environment. Is there a way to rotate access
logs without bouncing weblogic?
Steve
[email protected]

How to shorten URL of Sender Http adapter?

Hi,
in a HTTP-BPM-R3 scenario I have given the below adress to a 3rd party application which is goiing to trigger BPM:
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>&sap-user=XXXX&sap-password=XXXX&QualityOfService=ExactlyOnce
However they say that their tools doesnt allow to enter more than 127 char as URL. So they asked me to shorten it. Is it possible?
Of course I can shorten ns,interface, user, pass length (and by using synch interface the last part can be chopped off) but I wonder how to get rid of "&version=3.0" or user/password for a specific interface. Or is there any other solution inside PI like in ICM or somewhere defining a URL mapping/routing and converting a tiny URL to URL above?
PI: nw2004s SP20.
Any help will be appreciated...
Best Regards,
Edited by: FIT CONSULTANT on Jul 17, 2010 9:31 AM

Thanks guys,
My problem is not resolved (I did not try the dispatch configuration) I shortened the URL by shortening the namespace. Now I have a different problem thread:
Http sender without SOAPAction
Regards,

How to Configure two standalone Server to access with eachother

Hi All,
I have two stand alone Servers (SQL 2000) configured in two PCs in different locations (Location A & Location B) . I want to access Location A database from Location B Viz-Versa.
1. I have a STATIC IP provided by ISP and I m using a router (Linksys E1000)
2. I have Windows Server 2003 installed on one of the PC.
3. Both the Locations are in two different places, ISP providers are also different.
How can I setup the access. I have googled a lot of solutions but not able to crack.
Regards
Pradeep

Hi Pradeep Sriramdas,
SQL Server 2000 was out of support since April,2013. I suggest you can try to install SQL Server 2005 or later version. According to your description, you plan to connect to the SQL Server database engine from another computer, you must enable the protocol
in SQL Server Configuration Manager, such as TCP/IP;
When you want to connect to one instance from another computer, you also must open a communication port in the firewall.
In SQL Server Configuration Manager, you need to configure SQL Server to listen on a specific port; In addition, you configure the remote access server configuration option in SQL Server by using SQL Server Management Studio or Transact-SQL.
You ‘d better adding two different computer in the same domain, and choose to connect to instance via domain name.
There are more details about configuring the connection from another computer, you can review the following article.http://technet.microsoft.com/en-us/library/ms345343.aspx
http://technet.microsoft.com/en-us/library/ms191464.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to configure alert when sender CChannel failes

Hi PI Gurus,
Is there is any way to get an alert when a sender channel fails (reason connection time out etc.).
We have configured alerts for other scenarios when mapping is failing. How to handle the other situation.
Regards,
Krishna Chauhan

Hi,
Please check below urls.
http://wiki.sdn.sap.com/wiki/display/XI/Alert%2bConfiguration%2bin%2bXI?bc=true
ALRTCATDEF table SALRTCATUS
http://help.sap.com/saphelp_nw04/Helpdata/EN/8a/3e2d4105f8d92be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
Thanks
Ravi

How to configure Mail to send from off-site

I am trying to configure Mail on a laptop that will send and receive email both went it is connected to the servers ISP (on site) and when the laptop is connected to a non-site ISP. In other words when I am in the office I am connected to the ISP that is hosting my mail server. When I am out of the office and using an ISP that is not hosting the mail server. I have configured Mail such that I can send and receive email when I am onsite. When I am offsite I can receive email but not send it. In order to fix the problem I have tried configuring the SMTP to require password authentication using a couple of different server ports (i.e. 25, 110 & 587) but have been unable to send from off site. At this point I am at a loss as what to do. Any suggestions would be greatly appreciated.
Mac Book Pro Mac OS X (10.4.9)
Mac Book Pro Mac OS X (10.4.9)

If the off-site ISP doesn’t let you send no matter what port you use, there is little, if anything, you can do about it. Many ISPs, however, only block port 25 for all traffic outside their own network. Something that usually works in those cases is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings, but the outgoing server in question must listen to that port for this change to work.
If the off-site ISP allows sending on port 587, but the outgoing server you want to use doesn’t listen to that port, you may solve the problem by using an independent authenticated SMTP server that allows sending from any mail account no matter where you are.
A Gmail account, for example, would allow you to do this. Instructions for setting up a Gmail account are provided here:
http://mail.google.com/support/bin/answer.py?answer=13275
After setting up the Gmail account in Mail and checking that it works, you can use Gmail's SMTP server to send from your other mail accounts as well:
1. Log into your Gmail account on the web.
2. Go to Settings > Accounts.
3. Enable the addresses you want to be able to send from, and let Gmail validate them by verifying that you do indeed own them.
4. For each mail account you want to send from using Gmail’s SMTP server, in Mail go to Preferences > Accounts, and choose Gmail’s SMTP server from the Outgoing Mail Server (SMTP) popup menu.

How to configure MSI RG54SE II as Access Point ?

I have an msi router:
Firmware Version:
3.5.2 Build 070402 Rel.60023n
Hardware Version:
RG54SE II v1 081520C2
And i want it to configure it as an access point to a wireless network/ or another access point . Can you help me on how i do this ?
Regards,
Daniel

Hi. I Had a similar problem and found a solution. If you have another device as your primary router then:
1. connect ethernet cable from LAN port of your primary router to LAN port (NOT WAN!) of your RG54SE (I will just call it MSI).
2. go to web interface of MSI
3. if MSI has ip address in wan connection then release it. (Network->WAN) (I set my wan connection type to dynamic ip because there is no option to disable it)
4. in Network->LAN set ip address different from primary router (but in the same subnet) and out of DHCP pool
i.e. if your primary router has ip address 192.168.1.1 and its dhcp pool is 192.168.1.100-199 then you can set local ip address of MSI to 192.168.1.2
5. Disable DHCP on MSI router.
6. If your primary router also has active wi-fi then you must switch MSI wi-fi to another channel, so they do not interfere with each other.
that's it! It's simple and it works!

How to configure alerts for sender AS2 reports channel?

Hi,
We have configured sender AS2 reports channel to receive MDN back from our partner. Scenario is working fine and we are receiving MDN. How does "Enable alerts" option under Alerts Settings in Sender AS2 Reports channel work?
I see following options, but dont know how to trigger an alert when we dont receive successful MDN back:
Negative transmissionreport alert
Negative delivery report alert
Negative receipt report alert
Has anyone trigger any kind of alrert and route them to an email for negative mdn?
Regards,
Riya Patil

Hi Riya,
I tried to use 'Enable alerts' option,but it didn't work.
Please let me know if you get a success in this.
Thanks.
Regards,
Shweta

How to configure WLS to send HTTP access log to syslog under Solaris?

Similar Messages

Maybe you are looking for