How to connect mini to TV

How do I connect iPad mini to TV

I have mine connected via a VGA cable. Depending on your TV you could also use a DVI to HDMI cable. I don't as the resulting image does not fill the full screen.
Hope this helps.

Similar Messages

  • How to connect my cannon mx470 series printer with bluetooth to my mini mac?

    how to connect my cannon mx470 series printer with Bluetooth to my mini mac

    Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

  • How to connect my Macbook with an ipad mini in order to have an access to the internet on my iPad?

    Dear fellows, I am having a trouble in how to connect my mac with an iPad mini in order to have an access to the internet.

    If you are attempting to share your iPad mini's cellular data connection with the MacBook, please check out the following Apple Support article for additional details on how to do so.

  • How to connect my ipad mini to wireless printer

    Could someone tell me how to connect my ipad mini to my AirPrint printer

    If it says there is no sim card installed it either can't find one physcially, or the card moved and lost contact or has failed.  A new sim card can be obtained form your Mum's cell/mobile carrier if needed easily.
    However this is irrelevant to whether or not the iPad can join a Wifi network.  Its 2 different things.
    For now ignore the Sim card message and just try to connect to her Wifi network.  It is independent and should function regarldess of the sim card status.

  • How to connect a new 27" LED Cinema Display to an older Mac Mini?

    I bought a 27" LED Cinema Display (no Thunderbolt) but don't know how to connect it to my wife's older Mac Mini. I presume the Atlona adaptor is the solution, but I haven't bougt one yet.
    robbert keegel

    The cord attached to the display splits into a Mini DisplayPort, USB, and a MagSafe connector (for powering a laptop).
    There is a separate connector on the back of the display for the AC power cord.
    <http://store.storeimages.cdn-apple.com/2316/as-images.apple.com/is/image/AppleIn c/MC007_AV1?wid=326&hei=326&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0. 5,0.5,0,0&iccEmbed=0&layer=comp>
    <http://store.apple.com/us/product/MC007LL/A>
    "What’s in the Box
    LED Cinema Display
    AC power cord
    Printed documentation"

  • How to connect 3x mini-displayport cinema displays to Mac pro

    I'm looking for recommendations on how to connect 3  27" Apple cinema displays to a new Mac Pro (single card).
    2 connect direct to the mini-displayports; but which adapter converts DVI-D to mini-displayport (not mini-displayport to DVI-D)?
    Any suggestions/recommendations with a link would be appreciated.

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • How to Connect iPod 3rd Gen to Mac Mini

    I have two iPod 3rd gen's but can not connect it to my Mac Mini due to the sync cable which connects to firewire.        I've tried looking for some type of adaptor that will allow me to connect the 3G sync cable to my mini but am having no luck. 
    If anyone has a suggestion or can point me in the right direction I would greatly appreciate it.
    Thanks !
    Chuck  :- )

    OK - just figured out that this is a 2nd generation ipod (20GB). It has a firewire port at the top with a cover over it. I just got off the phone with Apple Tech support and they suggested I try the forums, etc. They didn't know how to connect this ipod to a USB port. Anyone have any ideas?

  • How to set min & max connections for  MSSQLconnection pool

    Hi,
    I want to set minconnection, maxconnection, idletimeout initial limit for the pool
    I have got a MSSQL database connection using following java code.
    // MSSQL DbConnection Code
    import java.sql.*;
    public class MsSqlDataSource
    public static void main(String arr[])
    Connection con = null;
    ResultSet rs = null;
    try{
    com.microsoft.sqlserver.jdbc.SQLServerDataSource ds = new com.microsoft.sqlserver.jdbc.SQLServerDataSource();
    ds.setServerName("10.50.50.51");
    ds.setPortNumber(1711);
    ds.setDatabaseName("test");
    ds.setUser("starhome");
    ds.setPassword("starhome");
    con = ds.getConnection();
    }catch(Exception e){}
    }In oracle i have passed min and max number of connection properties through setConnectionCacheProperties method.
    //Connection Pooling using Oracle Data Source:
    m_connSource = new OracleDataSource();
    m_connSource.setDriverType("thin");
    m_connSource.setServerName(m_host);
    m_connSource.setNetworkProtocol("tcp");
    m_connSource.setDatabaseName(m_db);
    m_connSource.setPortNumber(m_port);
    m_connSource.setUser(m_user);
    m_connSource.setPassword(m_password);
    // Enable caching. m_connSource.setConnectionCachingEnabled(true);
    java.util.Properties prop = new java.util.Properties();
    prop.setProperty("MinLimit", m_minConnections);
    prop.setProperty("MaxLimit", m_maxConnections);
    prop.setProperty("InitialLimit", m_initialConnections);
    prop.setProperty("InactivityTimeout", m_inactivityTimeout);
    prop.setProperty("AbandonedConnectionTimeout", m_abandonedTimeout);
    prop.setProperty("ConnectionWaitTimeout", m_connWaitTimeout);
    m_connSource.setConnectionCacheProperties(prop);I dont know how to pass min and max number of connection properties for SQLServerDataSource. Is there any method available to pass min and max number of connection properties for SQLServerDataSource.
    Iam using Tomcat. I found one way to set min and max connections for pool by doing changes in context.xml and web.xml using below url http://tomcat.apache.org/tomcat-4.1-doc/jndi-datasource-examples-howto.html
    I dont want to touch tomcat configuration files. I need to set connection pooling properties which is independent of application server.
    Please anybody give solution for this?
    Thanks,
    Prisha

    Hi,
    you need to define your database under the DB Admin tab. In the Schema objects node you'll find Sequence Implementations, and there you can definde min max values as well as caching and increments.
    Gerald

  • HT4941 how many mac mini can you connect to a thunder bolt display

    how many mac minis can you you connect to a thunder bolt display and if so how do you switch between them

    Here's the official page on connection options (you can connect one computer to a display).
    http://support.apple.com/kb/HT4885
    I've read elsewhere that you can connect two computers to the Thunderbolt Display, but you can't switch between them per se.  You can only power up one at a time.  Anyone, feel free to correct me on this, but my understanding is this is not an officially supported configuration.

  • How to connect my Alesis to Logic Express Pro, running on an Intel Mac Mini

    Hi,
    would anyone possibly have an idea how to connect my Alesis Multimix 8 USB to Logic Express 7,2?
    The Alesis has a USB out. But I don't see anything in the L/E documentation on USB connections.
    I'm hopeful there's another way.
    Thanks very much.
    -peter

    LE documentation won't give instructions for use of 3rd party equipment, except possibly generically.
    Have you downloaded the latest drivers? If it is a USB item, perhaps you are meant to plug in the USB cable rather than wishing it was something else.

  • How to connect android phone with iPad mini

    How to connect android with iPad

    What is it you want to do by connecting?
    Tethering an iPad to an Android Cell Phone
    http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
     Cheers, Tom

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • How to connect my Mac book Pro to a TV

    How to connect my MacBook Pro to the TV using HDTV cable

    I am assuming your TV has HDMI connector.
    In that case, if your MacBook is the retina-one, you have HDMI connector there too. All you need is HDMI cable to connect teh two.
    If your MacBook has thunderbolt port instead, you need Mini DisplayPort to HDMI adapter and HDMI cable.
    Hope this makes sense.

Maybe you are looking for

  • Associative Array problem in Oracle Procedure

    Hi, I've searched through the internet and this forum and haven't been able to resolve a problem using associative array values within an IN clause. Everything I've read states that I can't use the associative array directly in the SQL statement. I h

  • Rman backup errors..

    hi guru's please tell me the answeres..for this what will happen if we re run the Rman backup due to the job failure...will take a new backup from the begining? or will start from the first backup end where it left ? i am deleting some archieved logs

  • ISE High availiblity issue

    hi, There is replication issue between primary and standby ISE node.Once check logs on both node the certificate was expired.There is self sign certificate installted on both devices Any body advise me how i can renew self signed certificate on both

  • Report Parameter Check Box

    Hi alls, I have created two check box item in search region of one of my report , i want to restrict user to select either one of the checkbox ,both cannot be unchecked.How can i achieve it ? One more quick question how can i refresh the report data

  • Custom transfer in File Format

    Hi, I have this need to use the SFTP to get the txt files from a UNIX system and the Data Services is in the windows. The SFTP exe is stored in the unix server Any Suggestion of how to go through with this.