How to connect to Teradata source data

Version: 9.3.1
Is it possible to connect a cube to teradata using SQL Interface in a load rule? Or do I have to use Informatica?
If so, please provide brief steps.

Have a read of :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/esb_sqlint.pdf
Section :- Enabling Faster Data Loads from Teradata Data Sources
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • How ODI will reduce the source data to process?

    By using ODI we can get High efficiency of integration by reducing the volume of source data processed in the flow. How ODI will reduce the source data to process?

    Hi ramana,
    See the example.
    DO.
       READ DATASET s_filename INTO I_TEMP.
       IF SY-SUBRC <> 0.
        EXIT.
       ELSE.
         move I_TEMP to I_FINALTAB.
         append I_FINALTAB.
         clear I_FINALTAB.
      ENDIF.
    ENDDO.
         In the above code we are moving the data form file to i_temp and i_temp to I_FINAL.
    Here before moving to i_FINAL.
    use  TRANSLATE i_temp to UPPSERCASE.
    Then move to i_final.
    Pls. reward if useful.

  • How to connect Orcal devsuitehome with data 10g

    How to connect Orcal devsuitehome with data 10g
    can you give me full details coz I really dpress
    full details through Net configuration assistant or where

    Using the appropriate setting in tnsnames.ora file located in your [Forms_Home]\network\admin directory.
    There are some Oracle e-books about configuring the connection using the Oracle Net.. you should consult....
    All info are there....
    Sim

  • Need to find out a way to figure out how DB2 connect to Oracle and data mirroring etc.

    Hi, Gurus,
    I just take over a project which source is ICOMS as400 db2 database. Seems data mirro CDC is used to replicate from DB2 to oracle.
    I am very new to this datamirror CDC , plus I am new to figure out how db2 connect to oracle, is that through db link or what? or is there tnsnames entry?
    I would like anybody in this forum can point me to the right direction.
    Thanks in advance.

    user9233598, if mirroring/replication from DB2 to Oracle already exists then question is what product is being used?  If the product has already been purchased then I do not think it is very likely that management is going to want to purchase another product so I do not see how extra-cost Golden Gate or other Oracle Gateway features apply if those are not currently in use.  If Golden Gate or the Oracle Transparent Gateway are in use then you already have your answer
    Oracle supports ODBC/JODBC and the replication application on the AS400 likely uses these features or a thick Oracle client as the interface to Oracle.
    HTH -- Mark D Powell --

  • How to connect to Teradata using Jdeveloper 11.1.1.6

    Friends,
    Can anybody help me how to connect to Terradata database using Jdeveloper 11.1.1.6
    Thanks in Advance

    Refer How to use the Teradata JDBC Driver with WebLogic 10.3
    Add the teradata JDBC driver JAR terajdbc4.jar to classpath of weblogic server. Refer Using Third-Party JDBC Drivers with WebLogic Server
    Use the driver class
    and
    connection url: jdbc:teradata://DatabaseServerName
    for teradata
    Teradata JDBC Driver User Guide Chapter 2

  • HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

    Hi experts ,
    I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

    Hi Sushma,
    how to configure sendor JDBC adapter ..
    Select adapter type is JDBC..
    Give the Transport Protocol:.JDBC 2.0 (Example)............
                Message Protocol:...JDBC...........
                IAdapter Engine : Integration Server
    Processing Parameters..
    Quality of service.....(Example)..Exactly once
    Poll Interval .... Example ..10
    Query Sql statement..Example ..select * from XXXXX
    Document Name.....
    Update Sql stetement.....
    Thanks,
    Satya
    Reward points if it id useful...

  • Connect with a source Data

    Hi all
    I want to create an App that it looks like as Contoso App, which allows to collect data from a source, and show it in Excel app.
    I've saw videos and material about how to show info in Excel.
    Thanks in advance.
    Regards

    Hi Red Chromium,
    In general, we currently do not support write back to Excel. The app you listed only uses Excel to support the UI. Therefore, things like what the item is? e.g. a boiler, and what kind of cleaning is needed? e.g. hose down or scrubbing, along with the corresponding
    image is saved within the Excel sheet. This is what is visible on the left and right bar of the image capture screen.
    Now when the images are captured, along with the location and type of cleaning required, this data is saved in a Collection and not the Excel file. One could then leverage
    LoadData()
    and
    SaveData() to save out this data from the collection and load it back when the time arises.
    Hope this helps clear things up for you?
    Many thanks.

  • How to Connect to UniData from Data Services

    Other ETL tools like DataStage has a Unidata connector stage
    Is there anything similar in BusinessObjects Data Services ?

    There is no separate connectivity available out of the box. However, if there is a JDBC driver available for it then you can use that to connect to it as a SQL technology. Or you can invoke SSAS web services and process the xml output in odi.

  • Connectivity between BI 7.0 & Thirty party source Data Stage (ETL)

    In 3.x, by specifying Info source in the third party Source system (Data Stage - ETL), we are extracting data to BW system. Now my server is upgraded to BI 7.0. Already existing (i.e. created in 3.x) applications are running fine in BI 7.0.
    Without Info source how to connect BI 7.0 & Data Stage. What is the procedure.
    Thanks in Advance.
    Selva

    Hi Hari,
    I appreciate for your suggestions, I am doing exactly the same as u stated.
    I have ALEREMOTE in the ECC 6.0 and RFCUSER in SAP BI. For both I have kept password 'INITIAL'.
    I am giving following parameters.
    Target Computer (S server) --> Here I am providing IP Address
    System ID(system name) --> 'D00
    System Number                --> 00
    Background user Source System --> ALEREMOTE
    Password for Source System user --> INITIAL
    Repeat password                             --> INITIAL
    Background user in BW                RFCUSER
    Password for BW user                  INITIAL
    Repeat password                          INITIAL   
    and then click on 'Right' symbol and system is poped up with the small window with message
    'user alaready exists in SS only continue if profile and password r correct'
    Here, I am selecting the button 'Continue' and then
    after system again poped up with the window and message
    ' RFC Destination already exists in SS, Do u want to use same Destination....' and three buttons to select 'Use', 'Check', and 'Cancel'.
    Here, I am choosing 'Use'.
    After this the system is giving the Error message "RFC User Logon failed, check the connection - BI 7.0", and the screen is of
    RFC Destination maintenance. This RFC Destination is of SAP BW but in the right left corner of the the message line, system is ECC.
    so, I don't uderstand what is the reason for this error.
    Can u suggest me in SM59, RFC Destination (SAP BW) maintenance, on 'login/security' tab for 'Logon' information which USER ID and password I should enter? Currently, I have kept RFCUSER.
    Once again I appreciate your time and help.
    Regards,
    Jatin

  • How to connect DB2 database to Xcelsius

    Hi,
    I am looking out for options to connect my DB2 database to xclesius. I dont want to go for BOBJ licensing cost. Do we have some other way to achieve this?
    Thanks,
    Neha

    Check out the below links:
    How to connect to DB2 from xcelsius without the presence of BO environment
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=8&cad=rja&uact=8&ved=0CFEQFjAH&url=http%3A%2F%2Fwww.busi…
    Page no 7 has explained how to connect DB2 using the data access driver.
    --SumanT

  • Getting Source Data in Canonical Format

    All -
    I understand that in order to change the date format in xmlp we have to have the source data in the canonical format YYYY-MM-DDTHH:MI:SS
    My question is - How do I get my source data into this format? When I try to alter my session or do a to_char on a date column as follows:
    alter session set nls_date_format="yyyy-mm-ddThh24:mi:ss"
    or
    select to_char(sysdate,'yyyy-mm-ddThh:mi:ss') from dual;
    I get the message that the date format is not recognized. I'm sure that I'm just missing something simple, but any help that could be provided will be greatly appreciated.

    Hey BigD
    The XSD format is not recognized by the db ... Im chasing that up, they docs appear to say otherwise.
    You have some alternatives:
    1. If you are not bothered about the time portion you can just get the YYYY-MM-DD format and it will be formatted correctly by XMLP
    2. Use the Data Template engine from XMLP to get the data, it will format the date for you.
    3. Nasty but you could do something like:
    SELECT TO_CHAR(SYSDATE,'YYYY-MM-DD')||'T'||to_char(sysdate,'HH24:MI:SS') from DUAL
    If/When I get an answer from the db team on any function I'll let you know.
    Regards, tim

  • Unable to connect to Verizon prepaid data plan. Verizon states everything is Todd on their end. Please help

    .how to connect to Verizon wireless data plan from ipad 2?

    UUnfortunately I have tried all of the obvious fixes with no luck. Thanks anyways

  • How to connect to different data sources in  XI 3.1 UNIVERSE?

    hi experts,
    We are going to migrate from BO 6.5 to  BO XI3.1.
    and we have different data sources to extract and generate the reports using various tools like Webi,Crystal Reports, Deski etc.
    1         How to connect to different data sources like SAP BI query, DB2, Oracle etc,, provide me the step by step solution.
    2     We need to migrate the universes and reports from BO 6.5 to BO XI 3.1 using the Report Conversion Tool.
    can we directly convert from the deski reports to Webi or do we need to migrate first through Import Wizard?
    3    Scheduling the Reports through Infoview
    4    Various issues and how to resolve those issues, we generally face while scheduling, and while creating the queries like for example time out errors etc..
    5    BO Security
    6    Universe creation with best practices and the loops,contexts,aliases etc..
    please provide me the step by step solution documents and links.
    thans in advance
    venuscm

    I would recommend to take a look at the official documentation. YOu can find this here
    http://help.sap.com
    NAvugate to SAP BusinessObjects->All products and the select the product you want eg. BusinessObjects ENterprise or Universe designer and the appropriate version XI 3.1. Take a look at the admin and the user guides.
    Currently the Data FEderator will allow you to buid a universe that access data from various data sources. Another option is to merge queries from different universes at report level.
    Regards,
    Stratos

  • How make connection using data source with db2

    hiiiiii,
    please tell me the procedure to connect with db2 through data source (driver should support updatable ResultSet)

    Read the documentation of the application server used how to create a datasource. Once done that, you can obtain it in your Java code by JNDI. After retrieving the DataSource instance from JNDI, you can just use DataSource#getConnection() to acquire a connection from that datasource.

  • How to connect crystal report 2013 using sap business one data source

    hello Professionals .
    when i try to use data source sap b1 in crystal report 2011 or 2013 i got no list in company database,
    when i try to write it manual i got error "Connection failed".
    I tried to connect OLE DB and ODBC all work fine with me.
    i attached some snapshots .
    Any Advice Please ?

    Hi Mohamed,
    Please check below link.
    SAP Crystal Reports 2011/2013 doesn't show Company Data Base
    SAP Business One Data Source in Crystal
    Crystal Reports - How To - Connecting to your SAP Database - YouTube
    Migrating Crystal Reports of SAP Business One from SQL Server to SAP HANA
    Hope this helps
    Regards::::
    Atul Chakraborty

Maybe you are looking for