How to construct CollectionModel for table component?

I use ChildPropertyTreeModel to construct CollectionModel for table. If I need find rows in the table by rowkey, how to set rowkey for the CollectionModel?

Hi,
the rowKey is of type Set and contains the keys. In the POJO case the key entry in the Set is the row index (zero) based
Frank

Similar Messages

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How feed many record in table component and not use append command again

hi master
How I feed Multiple records in table component and not use append and save command again and again
Same as oracle grid
I give many record and save one time
Please give me idea how I add Multiple record and save one time not use append and save command again and again
Thank�s
aamir

Hi!
appendRow() method just add temporal row. For add them to DB commitChanges() method should be used. So you can use appendRow() method several times, fill every new row and only then use commitChanges() method. In this case all new rows will be added to DB per one time.
Thanks,
Roman.

Help for "Table" component in mhp/dtt

Hi,
i'm a Italian software developer.
i'm searching for some "table" component to use it in my projects to display lot of Strings in a such clear way.
I tryed HListItem and HListGroup without appreciable resoults.
Do you know and/or use particular Objects to do it well?
Or, must build i my own customized component from existing yet!?
Thx for answers and sorry for my bad enghlish too!!
Claudio

hi
i am also searching for table like component in mhp, but their is no such component i had found. so i think you have to create your own component.

How 2 define alias for WD Component / Application

Hi all,
There are methods in IWDDeployableObject to get WD Component / Application (WDDeploableObjectPart) by alias.
But how to define alias for them? Where should definition be placed and what is the format? Could anyone share working example or point to related documentation?
VS

Noufal & Bharathwaj,
Probably there is a confusion here: HTTP aliases are related only to corresponding service, and affects how URL is composed / interpreted.
On other hand, aliases I mentioned are related to deployment service (in this case: lookup deployable object part by alias). By the way, they cover both WD applications and <b>components</b> (probably component interfaces and more).
Valery Silaev
EPAM Systems
http://www.netweaverteam.com/

How to pass parameter for table name in form6i.

Hi ,
I am facing the problem to pass parameter for table name in form6i.
If any solution please infirm me earliest to my mail id.
([email protected])
example:
begin
select ename into :ename
from :tab_name
where empno =7788;
end;
It gives error as bad bind variable 'tab_name'
*** where :ename and :tab_name are form fields
Thanking you,
Balasaheb

object name not taken as table --> what do u mean by
this?
Please be more clear..
Regards
PriyaI have two block. First block I am displaying all the table using user_objects table. Another block I want display, user which table selected, corresponding table all the records.

How to Maintain Relation for tables

Hi All,
Can anybod help me how maintain relationship/ connectivity for
purchase order between (ekko- ebeln) and Handling unit (vekp-exidv).
Here I need to fetch the HU details based on the purchase order. Please through some light on this.
regards,
Ashwin

you can make the connection using the inbound (outbound) delivery for that purchase order.

ADF Faces 10g: How to empty an af:table component?

Hi,
I am using JDeveloper/ADF 10.1.3.
I have a page with 2 iterators on the same view (one always in search mode), a search form and a table for results. As there are a lot of rows in the view and I don't want to query it without search criteria to avoid getting all the results, I set the iterator's refresh property to ${adfFacesContext.postback==true}.
I made a Search button binding the Execute action and a Reset button binding the Find action. Now, when I hit the Reset button, I also want to reset the table (the query results) to empty. How to do that? I could not find any method to empty the rowset, neither at table lavel, nor at iterator, nor at view.
Thanks in advance for your replies.

Hi,
I don't have a declarative solution for you, but some possible solutions or ideas to do it.
1. put a method in the application module end expose the method to the client (data control). This method can either remove all rows from the VO (call removeCurrentRowFromCollection() for each row currently in the VO but keep them in the DB).
2. you can try to use executeEmptyRowSet() (I'm not sure it's available in 10.1.3) and hope that it removes all rows from the row set (the method is not documented, so I'm olny guessing it's function).
3. execute your search with parameters you are sure they will not return any result. This can be done from a backing bean.
Timo

How to get Tcode for table which has a table maintenance done

Hi Friends,
I have one issue.
How to get the specific Tcode again for the table to which i have used table maintenance .
I have generated table maintenance for many tables inside my package.
If i want specific Tcode for that particular table how do i find it...Is there any way to get that
Thanks in advance.
Regards
kishore

Hi Gautham,
I am still having problem... If i give Z* it shows all the Tcodes created with Z.
For that i will click Display object list and get my Tcodes inside my package..
But that is not my issue...
I am sorry if i didn get you properly
But still i didn find any way for that.
Will give one sample table which is Ztest. Ihave tcode ztest1.
Now as u said if i give Z* i will get all Z* tcodes ..In TSTCP table if i execute iam getting only the Tcode fields
lot of Z names(tcodes) are there. In that how will i find which is mine.I am not getting any parameter fied in output and all..
please help me.
Regards
kishore

How to display Header for table in Script

Dear All,
In script i am displaying the data in tabular format, by using the
function module write_form_lines. For this i have called multiple
windows for each column. I am able to display the data,however
don't know how to name this column, i.e the header for each column.
(Sr_No,,Vendor Name,,Account Number,,Reference Code,,Amount ).
Any help is appreciated.
Thanks & Regards,
Manju

Hi Manju,
Create a widow to display the header details(hard code the name of the columns). You have to use main window for displaying the table data.Loop the internal table in driver program, inside the loop call the function write_form for printing the table contents.
Thanks,
Prabhakaran

How to create transaction for table maintinance generator

what is the procedure(steps) to create transaction for a table maintinance generator

Hi,
The link will be useful for ur requirement.
allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8129f164-0a01-0010-2a8e-8765287250fc
REgards,
Sarosh

How to override security for table access when using SAP Query?

We have a number of infosets which use table join between PA0001 and CATSDB table. To execute a query based on such a query you would need access to table auth group PA through S_TABU_DIS. This was earlier not a problem as SAP query was earlier used by support staff and not end users. We do not want to give S_TABU_DIS with to end users as this amounts to givin them access to all PA tables.
The generated code for the query checks for the condition
"%rtmode-no_authchk = space"
before going for the authorization check.
Thus, ideally the authorization check for an InfoSet can be skipped if we can pass X for this variable from the InfoSet definition. Is there a way to do this?
Would appreciste any inputs to help suppress the authorization check at this point. Thanks.....

>
Julius Bussche wrote:
> Perhaps you could replace it with a class of your own (transaction SE24)?
>
> I have not tried to do this; it was just a thought.
>
> Kind regards,
> Julius
unfortunately this does not work. SAP saw fit to 'hard-code' the implementation of the interface in RSAQEXCE:
(only parts of that abap displayed here).
170 data: iref type ref to if_query_tab_access_authority.
1107 *       FORM AUTHORITY_BEGIN
1112 form authority_begin using p_auth_classname type AQS_CLSNA.
1119   perform authority_init using p_auth_classname.
1120   call method iref->access_authority_begin.
well for my part (searching a solution for a query on LTAK, wanting L_LGNUM as an object) i'm out of ideas. i shall have to modify SAP-standard and disable the class and do my own coding in the info-set. no other possibility - i cannot allow S_TABU_DIS for group LA and even if i did, what help would it be - i would have to allow that to all companies in that client having WM - and that would be literally all - i need LGNUM here!

How to enter entries for table TVZBT

Hi,
can any one help me how to maintain payment team description in defferent languge in TVZBT table.
this table contain the following data in english
SPRAS     ZTERM       VTEXT
E              ZA20          N 30 Due from end billing
Now i have to maintain same date in french ie
F              ZA20           N 30d'f bill
how can i update.

HI,
write a small program and insert it into the table .
data : wa like TVZBT.
wa-langu = 'F'.
wa-zterm = 'ZA20'.
wa-VTEXT = '30d'f bill '
insert tvzbt from wa.
is it the case that you just want to maintain only one entry of how... if its only one time one entry then i have other way of doing it with out writing the program.. please let me know

Crystal based on Universe + RAS SDK: How to get Universe for Table

Hi,
Is it possible to retrieve the Universes used in Tables for the EXISTING CrystalReport? I can access SI_UNIVERSE_INFO in enterprise to get the list of universes, BUT i need to know EXACTLY which Universe belongs to which Table. Getting just the list of them does not help, because there can be 10 Tables and only 2 Universes in the list.
I've checked ConnectionInfo property and it does not seem to store any Universe ID's or CUID's. ReportClientDocument.Database seems to be the only place in RAS object model, where such info can be potentially stored, but i could not find it so far.
Does anyone have any idea?
Thanks,
Roman.

It sounds like you need to use the Universe SDK to do what you are wanting to do. You should post this question to the "Business Objects Enterprise XI R2" forum and hopefully someone will be able to help you out. I'm no help with this one!
I believe the Universe SDK only comes in a COM flavour so if the SDK can do what you need it to do, you'll need to use COM from your .NET application.
-MJ

How to construct CollectionModel for table component?

Similar Messages

Maybe you are looking for