How to control leading spaces exchnage rate value

Hi
We have issue,when user is given the rate value with leadeing spaces in spread sheet,after upload spread sheet, rate is upload as 0.Please advise me how to control this in spread sheet
Thanks
Anjireddy

Hi,
what about if you format this cell as number? In this case the leading space will be ignored as soon as you press enter or navigate out of the cell.
does this help?
kr, Volker

Similar Messages

How to add leading spaces to af:table column

Hi,
I'd like to display leading spaces in af:outputText located in table column. Value property is bound to backing bean property, where I add custom leading text.
However, if I add , the & nbsp; text "& nbsp;" is displayed, not rendered by the browser. Any ideas?
Regards
Jernej
Message was edited by:
Jernej Kase
Message was edited by:
Jernej Kase

Hi,
since you didn't mention how you solved it, here is the approach i would have taken
- use skinning to add padding. This way you don't have to mess with the display data
Frank

How to append leading spaces in ALV Output

Hello Experts,
Is it possible to append leading spaces in ALV Output? We want to have a functionality that will show the output like a hierarchy in a column.
Thanks a lot for your help.
Example:
WBSElement
WBSELEL01VL2
    WBSELEL01VL3A
         WBSELEL01VL4X
             WBSELEL01VL5W
             WBSELEL01VL5Z
         WBSELEL01VL4Y
             WBSELEL01V5P
             WBSELEL01V5Q
    WBSELEL01VL3B
         WBSELEL01VL4L
             WBSELEL01VL5H
             WBSELEL01VL5T
         WBSELEL01VL4M
             WBSELEL01V5C
             WBSELEL01V5D
Edited by: sam jose on Dec 1, 2009 4:01 PM

Thanks, Nilesh.
Sorry for the delayed response. I have modified the ITAB with that logic and I see the indentation now (in Debug Mode of T_PLAN).
However, when I display the ALV output though, it disappears.
I am using the following method.
data: plan_control   type scrfname value 'TOOL',
      plan_container type ref to cl_gui_custom_container,
      plan_grid      type ref to cl_gui_alv_grid,
      plan_fieldcat type lvc_t_fcat,
      plan_layout    type lvc_s_layo.
if plan_container is initial.
    perform plan_fieldcat_init using plan_fieldcat[].
    create object plan_container
      exporting
        container_name = plan_control.
    create object plan_grid
      exporting
        i_parent = plan_container.
    plan_layout-cwidth_opt = 'X'.
    plan_layout-zebra       = 'X'.
    call method plan_grid->set_table_for_first_display
      exporting
        is_layout                     = plan_layout
      changing
        it_outtab                     = T_PLAN[]
        it_fieldcatalog               = plan_fieldcat
      exceptions
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        others                        = 4.
endif.
Can anybody please let me know if I am missing anything?
Thanks again.
Edited by: sam jose on Dec 8, 2009 8:44 PM

Urgent........How to add leading zeros to negative values.....

Hi,
I want to add leading zeros to negative values.
Present Value : -567
Expected Value : -0000000567
I know to adding leading zeros with the help of CONVERSION_EXIT FM.
Thanks in advance.
Regards,
Kumar.

Hi
Use below FM.
CONVERSION_EXIT_ALPHA_INPUT
Try out below FM with the above one.
CLOI_PUT_SIGN_IN_FRONT
ISJP_GET_SIGN
or you can use
WRITE variable USING EDIT MASK '-___________'.
or
CONCATENATE syntax
Hope it will solve your problem
Reward Points if it is helpful.
Message was edited by:
 ilesh 24x7
Message was edited by:
 ilesh 24x7

How to eliminate leading space in menu item.

Hello,
I'm using JDeveloper 11.1.1.4.0.
I have created menu dynamically, using RichCommandMenuItem in my bean class. Menu gets generated and works as per requirement.
Menu items however, display some leading space as seen in 'Screenshot(s)' section on the link given below.
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_commandMenuItem.html
I am required to remove this leading space from menu items.
Options that I tried:
1. Override CSS classes in skin
2. use setInlineStyle("") method of RichCommandMenuItem. I passed an empty string.
Neither of these gave me required results.
Perhaps I should pass some specific string such as "::icon:none".
Appreciate your suggestions.
Amar

Hi,
I hope you can remove leading white space as inlineStyle="margin-left:-10px;" for menu items.
Edited :check
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/menuBar.jspx?_afrRedirect=63726517039949

How to avoid leading space -char(160) in Apex items

Hi
I'm getting a leading space in one of my apex item (text area).
Further check reveals that it is char(160).
Could any one help me in this to avoid leading space in the item.
Many Thanks
--Vijay

Hi Vijay,
Try:
TRIM(:<Item_Name>)In the Post Calculation Computation section of the item.
Hope this helps.
Regards
Kamo

How to control the space between records in form layout

Hi ,
I need to display mutiple records (15-20) in a form ,
and have choosen FORM layout as I need to display each record in two lines (Can a record be displayed in two lines in TABULAR layout ? ) .
Now There is lot of space between each record and I could not move records closer . How can I control space between reords in FORM layout ?
(While creating Canvas I selected Distance bwteen records = 0 )
Thanks in advance,
Asha

Asha,
no in tabular layout there is no way to display a record on two lines. All you can do is to use a stacked canvas and use it to make the table scrollable horizontally
The distance between record setting is a property on the item level. if this is set to 0 (please double check) then all that is loeft is the item bevel. You can set the item bevel property to plain and then work on resizing the items hight until close to acceptable.
Frank

How to control the Cost Center incurred value posted from many transactions

In KP60, cost center wise , element wise budget is allocated .i.e planned. Ex: 450000 is assigned and saved.
Now ex: in FB60, when we post a vendor invoice having the value greater than the above value, system should not allow.
Like this, the cost to the cost center can be incurred to the cost center not only in FB60 , but also from many transactions.

Is it possible that you mean KP06? (not KP60???)
Because if this is the case KP06 is only for planning...not budget.
Please clarify..
Pan

Removing Leading Spaces in the field to be displayed

Hi,
Could you please tell me how to remove leading spaces in currency field in write statement?
the length of the field cannot be changed by writing fieldname(length).
is there any other method to do the same. the length should vary according to the amount in the field.
Ragards,
Krutika

hi,
please use "SPLIT " or condense .
eg: SPLIT wa_bseg-hzuon at space into wa_bseg1-hzuon l_space.
to better understand refer this code:
IF it_mhnd IS NOT INITIAL.
SELECT hzuon bukrs gjahr augdt augbl
FROM Bseg
INTO TABLE it_bseg
FOR ALL ENTRIES IN it_mhnd
WHERE belnr = it_mhnd-belnr
    AND bukrs = it_mhnd-bukrs
    AND gjahr = it_mhnd-gjahr
    AND umskz = 'E'.
endif.
data: l_space type char6.
loop at it_bseg into wa_bseg.
SPLIT wa_bseg-hzuon at space into wa_bseg1-hzuon l_space.
wa_bseg1-bukrs = wa_bseg-bukrs.
wa_bseg1-hzuon = wa_bseg-belnr.
wa_bseg1-hzuon = wa_bseg-gjahr.
wa_bseg1-hzuon = wa_bseg-umskz.
append wa_bseg1 to it_bseg1.
clear: l_space, wa_bseg1.
endloop.
IF it_bseg1 IS NOT INITIAL.
      SELECT belnr bldat
        FROM bsad into table it_bsad
        FOR ALL ENTRIES IN it_bseg1
        WHERE belnr = it_bseg1-hzuon
        AND   bukrs = it_bseg1-bukrs
        AND   augbl = it_bseg1-belnr.
endif.
regards
rahul
Edited by: RAHUL SHARMA on Jan 5, 2009 12:19 PM
Edited by: RAHUL SHARMA on Jan 5, 2009 12:20 PM

How to Control Cheque value not exceed the PO Value

Dear All,
My client requirement of the how to control cheque make above the PO Value. My client make the PO before MIRO puchase dept. make the Advance payment request and send to Accounts Dept., Accounts dept. make the payment against the Down payment request. After that MIRO has been done full value open item show in vendor line itme. Account people clear the payment against the invoice. They run the APP & clear all payment. But after that Purchase dept. make the advance payment request against same PO and send to accounts dept., Accounts dept again make the payment against down payment request. This is request to how to control that.
Thanks in Advance
(CSB)

hi,
here in this case you should change the Business Process to have better control over the system.
Make the PO then make the Down Payment Request and make the payment.
check is there any user exit available while making the down payment request which should not be made more than the po value.

Flash Builder 4 List controls trimming spaces from XML node values

I'm trying to migrate my Flex 3 application to Flash builder 4. One issue that I have is that one of my datasources returns a list of cities and regions. To get the regions to display in the correct order in Flex 3, a space was added to to their name in the database (ie. "West", "Northwest" are stored in the database as " West" and " Northwest" so that when sorted by the sql query they would appear at the top and gets translated to XML to fill in a list box or combo box in my Flex 3 application. I have functions that take that selected city or region value from the combo box and queries the database for various performance metrics. In migrating to Flash Builder 4, I noticed that the spaces in the region names no longer appear in the combo boxes. When I show the data in a datagrid, the spaces are still there but when populating a combo box or list box, the leading space gets trimmed. This is an issue since if a user selects the value "West", it doesn't find it in the database since it is listed as " West". This wasn't an issue in Flex Buider 3. Is there a work around or parameter that I can set to force the combo box or list box to show the data as-is versus having it trim off the leading spaces for my regions?
Also, a stupid question, in Flex 3, you were able to find the select value of a combo box by using comboBox.text. What is the equivalent in Flash Builder 4? Do I need to do comboBox.selectedItem.Region.toString() now or is there a shortcut to pull the text from the combo box?

I think you want this:
private function onLoadPortfolioData(event:ResultEvent):void
    var obj:XMLList = event.result.img as XMLList;
    if (obj.length > 0)
        _imgCollection = new XMLListCollection(obj);
        pictureList.dataProvider = _imgCollection;
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How to get y axis value(in a numeric control) by providing x-axis value using wave graph

Hi,
I'm new here, Sorry if i have selected wrong Location.
I want to get Y-axis value (in a numeric Control) by providing X-axis Value using Wave graph.
i want to do calculations with the obtained value.
i have attached File and Snapshot.

Well, you are using the Dynamic Data Type, which I almost never use, but if you convert the data to a WaveForm (using From DDT on the Signal Manipulation Palette, which is a choice when you right-click on the DDT Wire), you should be able to do this. Do you know about how Waveforms are stored? They are a Cluster, with t0 being a TimeStamp for the start of the Waveform, dt being the time step, and Y being the samples. So if you want a point at 0.5 seconds and dt is 0.001, you would pull out the point at Index 499 (offset 0) from the Y array.
Bob Schor

How to get space between two values in a single cell of a table.

hello,
how to get space between two values in a single cell of a table.
thanks a lot.
kailash.

sorry i got the answer.

How to control filter values in WAD without effecting the layout of output

Hi,
Anyone help me in how to control the filter values in WAD. We have a navigational block and when user selects the filter for values the key and name of the characteristics and displaying in the navigational block and because of this the format of the output is looking awkward ie., getting horizontal and vertical scroll bars.
So the requirement is i have select the characteristics from the filter and i also need text and name of the characteristics to be dispalyed but this shouldn't effect the layout of the output.
So anyone please tell me the possible solution.
Your help will be appreciated.

MeeHow wrote:
next example: 0 1 2 3 4 9 6 7 8 <- bad value is 9, and result of my filter should be (4+6)/2 = 5
Shouldn't e.g. the value 4 be outside too, because the average of 3 and 9 (=5.5) is more that 25% different to 4?
Here is a quick draft comparing three versions (LabVIEW 8.2):
Your formula node version
the same algorithm in G
Something along the lines you are proposing here.
As you can see, the new idea is not quite satisfactory. It needs more thought. Still, these drafts should give you some ideas how to do it. Modify as needed.
Also your data is similar to a square wave and has these large step functions where the value changes dramatically. These should probably be ignored. Maybe you should look at the first derivative and replace parts where a large positive slope is immediately followed by a negative slope of similar size, for example.
You should also look at absolute steps instead of percentages. If you use percentages and the value is zero, everything is outside, because even 5000% of zero is still zero, right?
LabVIEW Champion . Do more with less code and in less time .
Attachments:
filter testMOD.vi ‏41 KB

Is this how i control frame rate with IMAQdr property node?

Is this how i control frame rate with IMAQdr property node? if not, can someone point me in the right direction? for some reason, it doesnt work..
Attachments:
pic.JPG ‏75 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

How to control leading spaces exchnage rate value

Similar Messages

Maybe you are looking for