How to control workflow template id during creating?

Hi, expert
I am creating new workflow templates. But the workflow template id isn't in sequence.
For example,
the existing workflow template is 7XX000001, 7XX000002, 7XX000003 .... 7XX000016.
When I create a new one the workflow template id is 7XX008569.
It is a big issue, but you know, it really makes reader uncomfortable.
The same issue exists in workflow task id.
Do you have any good idea to make sure the new workflow template id is 7XX000017.
Thank you in advance,
Barton

Hi, Jay. Hi, Pavan.
Thanks for your kindly and quick answer.
7XX is the PREFIX numbers, and it is statable. Do it means almost 8000 workflows are created and deleted?
If I am sure 7XX00017 isn't avaible NO. , is it possible that I assign it to my new workflow, you know, by default, system will assign a 7xx081?? for it.
Thanks,
Barton

Similar Messages

How can serial numbers be produced during creating production orders???

In our company，the basic manufacture process are as follows:
1.CO01 Create production order
2 MB1A Goods issue to production order
3 CO11N Produciton order confirmation
4 MB1A Goods Receive
For some finished product with serial number management, when doing MB1A goods receive ,we
will input the serial numbers into the SAP for the first time.That means the serial numbers
was produced when doing MB1A.
But for some reasons,we wish when we create a production order,the serial numbers can be
produced for the finished product.That means we will release a production order,the serial
numbers can be produced for the finished product of the production order,can be auto
produced or by input manually.
We do not want the the serial numbers to input into the SAP until doing MB1A.
What can we do to produce the the serial numbers for the first time after release a
production order?
How can serial numbers be produced during creating production orders?
Thanks very much for any reply!!

You should configure the SN profile to allow that the order can be released w/o SN;
but... for the other issues, we have used and user exit that - after saving the order - generates a SN according to a given logic.
We could not fina dan easy way of creating the SN after relasing the order or when doing the GI.
Regards

How to convert workflow template number into transation code?

Hi Experts,
We are using WS20000081 Leave request workflow in SAP 4.7.I created one customized workflow according to the client requirement.How can i convert WS99900009 into Transaction?
I created one absence type with workflow template WS99900009.While applying a leave it is showing the erroe as "WS99900009 is unknown" .
Please help me to resolve this problem.
Thanks,
Hemalatha

Hi Arun
WS20000081 and WS04200009 are triggering when i applied a leave.But i need to add some amore task in that.For that i created the Customized workflow.Then we tried to create Rule groups with custom workflow id number in ESS settiongs.It was saying that ws99900009 is unknown.And we tried to replace the WS20000081 by ws99900009.It was alos saying that ws99900009 transaction is unknown.
So pls guide me how to convert ws99900009 into transaction?
Thanks in advance
Regards,
Hemalatha

How to control the shared libs when creating an new OC4J in AS 10.1.3.4

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

HCM/OM workflow template - approval for creating positions

Hi Guys,
My requirement is to create a custom workflow for the approval process of creating positions. I have the follwing questions:
1. Is there any workflow template that can be used?
2. What BO should be used?
3. On what event should the WF be triggered?
Many Thanks in advance,
Cristian

Please check with these Business objects
PDOTYPE_S Position
PDOTYPE_SH HR Position
Thanks
Arghadip

How to Prevent Workflow when Automatic PO created in 3rd Party Sales

Hello,
We have set up a special Sales Document Type for the purpose of 3rd party sales. The item category is TAS, so the Purchase requisition gets created automatically.
The problem is that when the Sales Order is saved, it starts a Business Workflow and sends an email to our EDI Technical Team. We want to disable the workflow functionality in this sales document because it is not needed.
Is there a way to disable ALE for a sales document type?
Thanks very much!

Hi,
Please review the following notes for more information:
550388 FAQ: Customizing of third-party and individual Pos
210997 Accnt assignmt categoriesin third-party and indiv.P
On creating Purchase order for requirement created for a customer sales order stock, if the customer sales order stock is not valuated, this means a Consumption ( GBB ) account is involved here. If the posting is a consumption account, SAP allows the user to decide whether it should be autotmatically or manually entered. Because of this option, system need this account to be set with Field 'Automatic posting only' to ' '.
With this field 'Automatic posting only' setting to ' ', whether the account can be automatically or manually entered is then controlled by the field status in the PO creation. If you do not want the user to enter the account manually, then this account should be set to display mode in PO.
If the customer sales order stock is valuated, then in General business process, this would involve a BSX ( material account )
postings. Normally this is automatically derived during PO creations. No manual enterring is allowed. Thus if it is correct to set this account with field Automatic posting only' setting to 'X' in FI settings.
Please read the note 37563.
Please check if note 842977 is present in your system.
regards
Waman

How to modify Workflow template

Hi All.
As per the client requirment, When we receive any notification from workflow either worklist or mail it looks like the following header.
To :
Sent:
Start date :
Due :
ID :
As per requirement, i wanted to modify above text to Dutch,
Could you please let me know where can i get this text for modification.
Thanks in advance.
Regards,
Senthil

Senthil
Check System Mailer item type. You may find this there. Recently there was another thread on similar topic.
Thanks
Nagamohan

How do I delete templates in pages

how do I delete templates thatI have created in pages

Hi phase one,
Same way you delete any other file: Locate the file, select it, then do one of three things:
Drag it to the Trash,
Go File > Move to Trash
Press command-delete.
With Templates, the tricky part is the first step: Locate the file.
In the Finder:
Press and hold the option (alt) key as you go to the Go menu and select Library.
From Library, open each of these folders in turm:
Library > Application Support > iWork > Pages > Templates > My Templates.
Select the template file(s) you wish to remove, and move them to the Trash using one of the three methods above,
Regards,
Barry
PS: Files moved to the Trash can still be recovered by drgging them out of the Trash. They're not actually removed until you Empty the Trash, an item found in the Finder's Application menu (named Finder).
B

How do I delete templates in pages09

How do I delete templates that I created and now would like to delete stored in Pages 09
Thank you
beverlyfromjackson

In Finder, navigate to your user’s Library -> Application Support -> iWork -> Pages -> Templates folder. Then select the templates you want to remove and delete them. My recommendation though is if you want to archive them create a folder in your Documents folder for them and move them there, that way if you ever need them again you can easily move them back.
Roger

Error during approval Process flow in Process controlled workflow

Hello Experts,
We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system
It is regarding the two new additional account assignment categories that came into picture when we connected the new R/3 backend system to our SRM system, i.e. Asset and Network.
There seems to be some problem with the approval workflow for those SHC, that have such Acc *** Cats.
Please find below my obeservations:
- if you have just one line item in the SHC, and this item is either booked on Asset or on Network, than everything goes fine. After the Acc *** approval, the PR is created in R/3
- if you have SC with a mix between an "old" Acc *** Cat (Cost Centre, WBS and Order) and one of the "new" Acc *** Cats, than the workflow is not working as required --- the manager, that is responsible for the accounting approval of the two positions (e.g Cost Centre and Asset) gets only one work item in his approval overview --- in that work item, the two positions are there, but the Asset one is grayed out --- so, the Manager approves only the Cost Centre positions and than the SC is no longer with the approver --- if you observe the SC now from the requisitioner point of view, the status of the line items in the approval process overview of both(!) lines is "approved", but the overall status of the SC is still "in approval"
Can you all experts plz let us know why this is happening and how this can be resolved?
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

How to make a restart of the workflow in a process controlled workflow?

Hi Experts,
How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
Thanks and regards,
Ranjan

Hi,
Restarting workflow goes to 1st level approval step. It is not requester.
I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
Regards,
Masa

Create Workflow template using WebPartPagesWebService

Hello,
I'm using SharePoint web service "WebPartPagesWebService", I used the method ValidateWorkflowMarkupAndCreateSupportObjects() to create a workflow template.
below is my method:
string DefinitionFile = @"C:\Users\Administrator\Desktop\WorkflowFolder\testwf.xoml";
string RulesFile = string.Empty;// @"C:\Users\Administrator\Desktop\WorkflowFolder\Workflow.xoml.rules";
string ConfigFile = @"C:\Users\Administrator\Desktop\WorkflowFolder\testwf.xoml.wfconfig.xml";
string flag = "2";
WebPartPagesWebServiceSoapClient client = new WebPartPagesWebServiceSoapClient();
client.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
client.ClientCredentials.Windows.AllowNtlm = true;
string str = client.ValidateWorkflowMarkupAndCreateSupportObjects(DefinitionFile, RulesFile, ConfigFile, flag);
I get a error in the result: "Data at the root level is invalid. Line 1, position 1."
Is there any idea how ca i fix it?
Many thanks

Hi Jinming ,
If you are creating a template to allocate overhead cost to the final product , you have to use either enviornment 009 ( Process Orders ) and enviornment 0012 ( Production Orders ).
For planning , use enviornment 001 ( Cost Estimate/production Orders ).
I dont think enviornment 104 is correct . I dont see the enviornment in my list ECC 5.0
Enviorment 009 and 012 are tried and tested . Use them as per your requirement .
Please revert back for any further clarifications .
Regards
Sarada

How to transport changes made on Workflow Template to other cleint

We have make changes to Workflow template via tcode PFTC_CHG (Change Task), with workflow builder screen, we make changes on the standard task, work item text etc, save the changes to workflow template WS90000XXX. However the changes we make is not save under a Transport Request number.
How to make the changes on workflow template to save under a transport request and transport it to other client. ?

Hi Eric,
All development and customization of workflwo are saved in a transport request.
If while making the changes it did not prompt you for a TR then check the TR in whcih the task was created.
To port TRs follow the below procedure:
1. Go to t-code SCC1.
2. Select the transport request number and enter the source system (client)
3. Click on 'Including Request Subtasks.
4. Click on button 'Start immediately'
This would port the TR.
Please note to port workbench TRs before the customizing TRs.
Regards,
Saumya

EP6.0.2 Create new workflow template with graphical editor

Hi!
In the EP6 Content (Administration -> Workflow Content -> Workflow Templates) you can find an iview to generate templates for ad-hoc (java-) workflows.
After installation the button "Create New Template" is disabled.
How can I configure the EP to create new template with graphical editor? Or should I wait till SP4 is rleased?
Regards,
Henric

Hi Henric,
We have had to develop our own way of creating templates. This area seems to be very underdeveloped at the moment.
Paul

How to control PO Release strategy using WorkFlow

please tell me how to control PO Release strategy using WorkFlow.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 31, 2011 9:35 AM

Hi,
Yes they are same unless you differentiate by using
1> Purchasing Document Category i.e CEKKO -BSTYP
A..... Request for Quotation
F......Purchase Order
K......Contract
L......Scheduling Agreement
So if you just create a characteristics for CEKKO-BSTYP then maintain its values only for F so it will not be applied to RFQ

How to control workflow template id during creating?

Similar Messages

Maybe you are looking for