How to correct Mail 5.3 errors in OS 10.7.5 update on Mac Pro
Since downloading update to OS10.7.5 from Software Update in December, Mail (5.3) cannot send out and all SMTP servers are listed as "Offline". What has caused this and what's the fix??
I have 3 accounts in Mail, from 3 different mail clients with 3 different SMTP outgoing servers. I cannot send any outgoin mail and one one account cannot even open any INBOX mail listed prior to 29th December when I did the update of OS10.7.5. On the other two accounts I can open previous mail.
Have checked the settings of all 3 accounts and seem ok. I have Entourage on the same machine and there is no problem using the same 3 accounts on MS Office Entourage. So seems that it is Mail that is affected. But why and what's the fix?
I have tried and downloading installing the latest update as Mac OS10.7.5 Combo, but it made no difference? I am using a mid-2011 MacPro 2.3 Ghz Intel Core i5.
Grateful for any suggestions, advice etc.
I have put this problem up last week but have been struck by the number of similar Mail problems reported and the curious shortage of replies, let alone suggestions for fixes. Is there something about Mail problems that are so different form the general range of OS/software problems in Macs???
Did verify disk permission, repair disk permissions
Steffi, since you can not boot I will assume you did this from your install DVD under Disk Utility. Go back again and this time run the Disk Repair, if there are any error (red) message run the Repair again. Then check the SMART Status at the bottom of the window, it should say "Verified". Quit DU, reboot, then download the 10.5.3 Combo Update from the Apple site and try it again this time without any peripheral attached.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1053comboupdate .html
JG
Similar Messages
-
hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?
what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B -
How to correct or report location errors introduced with iOS 4 vs. iOS 3.x?
When I use location services (via any application) on my iPod touch (1st gen - iOS 3.1), including Find-my-iPhone, my touch's location is precisely located. I have even reported both my wireless routers to Skyhook to assure this accuracy at home.
My iPad, however (via any application, including Find-my-iPhone), has a location error of about 250 yards to the south south east. All of my neighbors with new WiFi-only iPods and iPads think location services is crappy, because it doesn't locate them in their home. Those with 3G support don't generally have the problem.
I've tried to find out where I can report the precise coordinates of my personal hardware (as I did for Skyhook) so Wi-Fi location is improved AND notify the proper organization that an entire swath of East Texas has been scanned with a large location bias, turning data into garbage. Anybody know who to talk to?Basically, Apple need to inform people how to correct their router info that is contained in their faulty "Locations Service Database" - now, in theory, Apple could collect this information from a user by means of a simple web based form on their support site that asked for the MAC address of the router and either latitude/longitude info or even the users' post code (Zip code). However, in practice this might be harder to do owing to security concerns...
I have had problems with the WiFi provided location service on BOTH my iPad and iMac for at least 2 weeks now. It shows me as being in central London when I am in fact in Central Scotland - very annoying!
What is just as annoying is that there is no info from Apple to even acknowledge that this problem exists...
I have raised this issue with Apple Support via their iPad feedback page - but no response yet. -
How do I use Airport Extreme to act as a wireless receiver for a Mac Pro?
Hello -
I'm trying to use an Airport Extreme (1st Generation) as a wireless receiver for a Mac Pro but I can't figure out how. My main modem / wireless router (non-Apple) is upstairs. My Mac Pro is down stairs. I'm looking to get internet connection for that Mac Pro downstairs. Is it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Thanks for the help.
NathanIs it possible to use the Airport Extreme to connect the Mac Pro to the wireless internet provided by my wireless router?
Unfortunately, Apple designed their routers to work with other Apple routers. It would be extremely unilikely that the AirPort Exteme could be configured to work with a router from another manufacturer.
The AirPort Extreme would need to be configured to "Extend a wireless network", but an error message is almost surely to occur when you try this.
There are other alternatives, but they would involve more hardware. Post back if you are interested. -
How do i move my Ipod library from my old g4 to my new mac pro
How do i move my Ipod library from my old g4 to my new mac pro
Hi there Jimmyjfar,
You may find the information in the article below helpful.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
-Griff W. -
How can i transfer all my data 250 GB from external hard disk to MAC pro
How can i transfer all my data 250 GB from external hard disk to MAC pro
The simple answer is just connect the external hard drive and drag the files from there to wherever you want them to go. If you need to do something more specific, you'll have to provide more details.
-
How fast/well does GB2/3 run on a Dual-Core Intel Xeon Processor Mac Pro
never bothered to ask this before but it finally came to me.
Does anyone who had G5's ( Quad-4.5gb RAM )& who now own the Dual Core Mac Pro souped up notice major improvements in how GB2/3 operates? i mean as far as:
1- speed
2- allowing for more midi tracks/audio/loops/etc
what is the difference with the new Dual Core MACS in terms of how GB works? and therefore why should someone invest in the Mac Pro?
i.e. will there be a major speed bump with ilife from a Quad to the new intel dual cores?I did not ever have a PowerPC Mac nor I have a Mac Pro (which is 4 core, not 2), but anyway GB as of version 3.0.4 is not optimized for multiple cores. This means it will only use 1 core of no matter how many you have on your system. This said, it should anyway quite a bit faster on a Xeon Mac Pro than on a G5 PowerMac, but not sure how faster. Also the number of audio tracks you can have mostly depends on the hard drive speed, even a week G4 CPU can do like 40-50 stereo tracks if the drive is fast enough.
-
How do I know what kind of drive is ok to install into my Mac Pro 1.1?
Can I install a "Samsung Desktop Class Spinpoint F3 1 TB SATA 3.0 Gb-s 32 MB Cache 3.5-Inch Internal Bare-OEM Drives, HD103SJ"
drive into my Mac Pro 1.1? (2x3 3 Ghz Dual-Core Intel Xeon processor.)
All the reviews for this drive were by people with PC's not Mac's. Also, my Mac Pro is a Tower so does it mean this "desktop class" won't work? Samsung has another one for $10 more that doesn't say "desktop" : the "1TB Samsung Spinpoint F3 SATA2 3.5" Hard Drive (32MB cache, 7200rpm)." Should I get that one instead?Thanks, guys. I ordered and installed the drive I asked about, and it's working fine. The next drive will be the WD black, as you suggested. (It was too late for me to change my order when I read your recs.)
Having installed this I TB drive, I now want it to be my main one, with my system and all of my files moved to there. My current main drive, the one that came with the computer, is only 250MB and is almost full. My new question is: what's the best way to move everything? How do I get the new drive to have a working system folder and be the start up disk. I remember last time I tried to copy everything from one drive to another, the copied system wouldn't work on the new drive. -
How to correct mail problem updating a gmail cache directory with 1844674407370955051594 headers
i have been using a 10.6 version os x mail app for months with a gmail imap account, without incident.
given apple's ssl failing, i was compelled to upgrade to 10.9.2, which includes a newer mail version.
over the past several days since the upgrade, given the fan sound it would appear that mail takes ever increasing cpu resource.
when the fan start up, a glance a top, shows mail at the head of the list.
on thelatest occasion, i opened the activity display and observe:
if someone could please explain what mail is attempting here, why it is failing, and how one might correct or avoid the issue, that would help much.I finally had to get FuseMail to "reset the IMAP flags" on their end and everything seemed to resolve itself.
-
How to correct an Applescript recurring error
I have been trying to find the command in Applescript without success which will allow me to do the following:-
1. Cell cclr is numbered 1551 on an iWork Numbers spreadsheet comprising 150 rows by 130 columns.
2. This cell has a value of 1 inserted into it.
3. If the cell cclr contains the figure 1 I wish to set MyRGB to the background color of another cell wfc.
4 I then wish to set the background color of yet another cell, wpf, to the color which has been set to MyRGB.
I have tried many commands which all result in errors such as:-
set cclr to 1551
set wfc to 1419
set wpf to 1549
if cell cclr of the front document of the first sheet of the first table = 1 then set MyRGB to background color of cell wfc of the first table of the first sheet of the front document
set background color of cell wpf of the front document of the first sheet of the first table to MyRGB
On running this script I get an Applescript Error:- Numbers got an error: Can't get table 1 of table 1 of sheet 1 of document 1
Can anyone kindly give me a pointer as to how to accomplish this?
Kind regards,
Weaver158.Hi,
Weaver158 wrote:
However once it is incorporated into the script I am writing I get the Applescript error as before. I have tried all sorts of different combinations of the terminology in an endeavor to find a solution to no avail.
Because you have already specified the table at the beginning of the script.
tell the first document
tell the first sheet
tell the first table -- <---these 3 lines equal -- tell table 1 of sheet of document 1
So you must remove the block "tell table 1 of sheet 1 of document 1"
Here is the script
tell application "Numbers"
activate
tell the first document
tell the first sheet
tell the first table
set nwt to text returned of ¬
(display dialog "ENTER THE TOTAL NUMBER OF THREADS IN THE WARP REPEAT DEFINING EACH THREADS COLOR
AS IT IS ENTERED USING THE COLOR PICKER" default answer "")
set nwt to nwt as integer
set z1 to 0
set sc to 1419
set do to 119
set dd to 119
set dc to 0
set de to 0
repeat until z1 = nwt
set MyRGB to choose color
set the background color of cell sc to MyRGB
set z1 to (z1 + 1)
set sc to (sc - 1)
set do to (do - 1)
set dc to (dc + 1)
set de to (de + 1)
if dc = 4 then set do to (dd - (de * 150))
if dc = 4 then set dc to 0
end repeat
set nwp to text returned of (display dialog "ENTER THE TOTAL NUMBER OF THREADS IN THE WEFT REPEAT DEFINING EACH THREADS COLOR AS IT IS ENTERED USING THE COLOR PICKER" default answer "")
set nwp to nwp as integer
set z1 to 0
set sd to 1550
set dz to 1560
set dx to 1560
set dy to 0
repeat until z1 = nwp
set MyRGB to choose color
set the background color of cell sd to MyRGB
set z1 to (z1 + 1)
set sd to (sd + 130)
set dz to (dz - 1)
set dy to (dy + 1)
if dy = 4 then set dz to (dz + 600)
if dy = 4 then set dy to 0
end repeat
set wfc to 1549
set rwfc to wfc
set sd to 1550
repeat nwp times
repeat nwt times
set MyRGB to background color of cell sd
set the background color of cell rwfc to MyRGB
set rwfc to rwfc - 1
end repeat
set sd to sd + 130
set wfc to wfc + 130
set rwfc to wfc
end repeat
set MyRGB to ""
set wpf to 1549 ---First thread in warp---
set wpfd to 1549
set wfc to 1419 ---First colour in warp---
set wfcd to 141
set cclr to 1551 ---First lift in picking plan---
set wctr to 1
set w2 to 1
if value of cell cclr = 1 then
set background color of cell wpf to (get background color of cell wfc)
end if
end tell
end tell
end tell
end tell -
How to Correctly Trap PL/SQL Errors for APEX
This is probably a simple fix but, I have been at it for a while and can't seem to find the magic combination.
I have a page process that calls back end PL/SQL. I have a page item that is populated by said PL/SQL procedure, P35_PROCESSING_MSG. As you know the Process allows me to specify a message for Success and another for Failure. My desire is that, if there is a back end failure, the error will display in the dialog area, using the built-in "Process Error Message" functionality. Instead, after execution, the page item still has its default value and the following, ugly, error displays in the tabular report region.
report error:
ORA-20001: Error fetching column value: ORA-01403: no data found
ORA-06510: PL/SQL: unhandled user-defined exceptionI just don't get why it displays here instead of in the usual failure area. Moreover, I don't understand why the error is "*+unhandled+* user-defined exception" when, as you will see, I have handled it.
I have a page process to perfom custom MRD for a tabular form. (I don't think this is really germane to the more generic issue but, I bring it up as an explanaintion for the following code sample). I am diliberately causing a DIVIDE BY ZERO error to test the error handling form the back end.
PROCEDURE PROCESS_MARGIN_CALL_DELETES( as_StatusMsg OUT VARCHAR2 )
IS
lb_InnerErrorOccured BOOLEAN := FALSE;
ln_DeleteTargetCnt NUMBER := 0;
ln_DeleteTargetRow NUMBER := 0;
BEGIN
ln_DeleteTargetCnt := apex_application.g_f01.COUNT;
FOR ln_DeleteTargetIndx IN 1..ln_DeleteTargetCnt
LOOP
ln_DeleteTargetRow := apex_application.g_f01(ln_DeleteTargetIndx);
BEGIN
If ( apex_application.g_f14.EXISTS(ln_DeleteTargetRow) ) Then
select 1/0 into ln_DeleteTargetCnt from dual;
DELETE FROM RISKDM2.INTRADAY_ECS_RSKALYST_MRGCALL
WHERE RISK_MARGCALL_ID = apex_application.g_f14(ln_DeleteTargetRow);
End If;
EXCEPTION
WHEN OTHERS THEN
as_StatusMsg := as_StatusMsg || SQLERRM;
lb_InnerErrorOccured := TRUE;
END;
END LOOP;
If ( lb_InnerErrorOccured = TRUE ) Then
RAISE INNER_EXCEPTION;
Else
as_StatusMsg := 'Successfully Processed';
End If;
EXCEPTION
WHEN INNER_EXCEPTION THEN
RAISE_APPLICATION_ERROR( -20001, as_StatusMsg );
WHEN OTHERS THEN
as_StatusMsg := as_StatusMsg || SQLERRM;
RAISE_APPLICATION_ERROR( -20000, as_StatusMsg );
END; The associated code in APEX is short and sweet:
BEGIN
MBRDATA.MEMBER_MGR.PROCESS_MARGIN_CALL_DELETES( :P35_PROCESSING_MSG );
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR( -20002, :P35_PROCESSING_MSG );
END;What I am missing?
-JoeJoe Upshaw wrote:
This is probably a simple fix but, I have been at it for a while and can't seem to find the magic combination.
I have a page process that calls back end PL/SQL. I have a page item that is populated by said PL/SQL procedure, P35_PROCESSING_MSG. As you know the Process allows me to specify a message for Success and another for Failure. My desire is that, if there is a back end failure, the error will display in the dialog area, using the built-in "Process Error Message" functionality. Instead, after execution, the page item still has its default value and the following, ugly, error displays in the tabular report region.
report error:
ORA-20001: Error fetching column value: ORA-01403: no data found
ORA-06510: PL/SQL: unhandled user-defined exceptionI just don't get why it displays here instead of in the usual failure area. Moreover, I don't understand why the error is "*+unhandled+* user-defined exception" when, as you will see, I have handled it.<Jedi>These are not the errors you are looking for.</Jedi>
Anything included under a "report error" during page rendering is not displaying errors associated with a page process, but with the rendering of that report region, in this case clearly:
ORA-20001: Error fetching column value: ORA-01403: no data foundThe ORA-06510 user-defined exception error relates to this (ORA-20001 being a user-defined error), but it is coming from the APEX framework rather than your code. Often these prove to be untraceable, unrecoverable problems caused by corruption of report metadata, only "fixable" by dropping and recreating the region.
This may or may not be related to the setting of the page item "by said PL/SQL procedure", but the exceptions reported in the region are not being raised by the procedure.
What does the debug trace show to be going on?
Edited by: fac586 on 15-Aug-2012 08:35
Added "...reported in the region..." for clarity -
How to correct "No Mountable Systems" error
I downloaded the trial version of Maya 2010 on my macbook running mac os 10.5 and when I click the .dmg file I get an error message stating that it failed to mount due to "no mountable systems". The download was listed as a binary file, it was the mac os version I downloaded and it downloaded to my downloads folder as a dmg. I've tried re-downloading. Some of my classmates were able to download and install the same program successfuly without any problems. What could be wrong? I've also tried re-downloading with multiple web browsers and nothing works.
Does this give you any clues on HDR? http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDwQFjAB&url=http%3A%2 F%2Fhelp.adobe.com%2Fen_US%2FBridge%2F3.0%2FWS3B0804D4-9DB7-441d-983D-0F863872F6E6.html&ei =Lfz5TtT-H6LkiAKIrLnIDg&usg=AFQjCNHFhS6ND2dG24gADWxEeOMdWacd4A
-
How can I get rid of error 9705 on iMac with Firefox update, using Musicnotes site
I have been downloading successfully from musicnotes.com on this computer until the Firefox update. Help from that site took me through a whole process to be able to print out my purchase, which ended in the error message 9705. AppleCare says it is a Firefox problem. How can I fix this? (Time Machine was not running.)
I have this problem also and I've tried all the same things you have. None work. Only thing that works is disabling Java in Firefox preferences, which is a pain in the ass because most websites don't work properly when Java is disabled.
I don't know how to delete Java plugins or delete Java altogether and re-install. Is this possible? or wise? -
Calendar is incessantly posting error messages that it cannot change or delete an event on my Exchange calendar. I have tried the "revert to server, try again, and ignore" more times than I can count. I even deleted the exchange from my connection and reinstalled without help. Even when I have deleted the Exchange, it continues to have this error window every 60 seconds. I am ready to stop using the computer just for the stress of it. Any suggestions or help before this screen winds up with a shoe in it?
To prevent Firefox from displaying form autocomplete suggestions, you can turn off that feature using the about:config page.
In the address bar, type or paste '''about:config''' and tap the Enter/Return key.
I suggest bookmarking this for easier future access.
In the search box, type or paste '''formf''' and tap the Enter/Return key.
Scroll down to '''browser.formfill.enable''' and tap the Toggle button to switch it from true to false.
That's it. Does it work on Facebook?
''The about:config preferences editor in the mobile version is similar in principle to the desktop version but many of the preferences available on the desktop version have no effect in mobile. This one I only tested on one site, but it seems to work.'' -
what do I do? Im lost
For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.
Maybe you are looking for
-
I down loaded the newest iTunes software to update my iPhone 4 and when I open it, it crashes. I have completely uninstalled it twice and reinstalled it again and still it doesn't work. Please help.
-
How can I transfer music,video,photo from my iphone4to my iPad air and vice versa
How to transfer music,movie and photo from my iPhone 4 to my iPad air and vice versa
-
Hi I experience error while using maps & selecting two destinations (start & end). The error message I get is 'Direction Not Available (Directions could not be found between these locations). How do I get solution for this?
-
OK, Two questions: First is the Cloud Acrobat "PDF Pack" something to be asked about in this forum, or should it go under Acrobat? I'm guessing here, because Cloud, but not certain. Secondly, using that product (which I got to from here: Reliably Cre
-
[SOLVED]dhcpcd does not start on boot anymore
Hello, I reinstalled Arch last night to try and be as to the letter as possible because I had three bad installs( or so I thought https://bbs.archlinux.org/viewtopic.php?id=195192 ) and it was going well. I tweaked some SSD Optimization configs and w