How to creat Data source from Multiple Tables in SAP BI ?

Hi Experts,
1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
2. For Inventory tables are           :           MSEG MKPF.
3. For Invoices MIS   tables are -          RBKP & RSEG.
4. For Taxation MIS tables are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
5. For Master data tables are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
How to creat   individual Datasource for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices, 4. Taxation , 5. Mater data. ?

Hi,
Go for the generic data sources.
1. first create the view on all the tables.
You can only use join conditions but not Union.
you can specify one table as primary table based on your requirement.
2. build the data source based on the view.
Regards,
Siva
Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

Similar Messages

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

How to create an invoice from multiple sales doc.

Hi,
how to create an invoice from multiple sales doc.
thanx,
sourav

hello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards.

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

How to create an Hierarchy from 2 tables in Essbase

Hi,
Currently We have 5 dimension tables and one fact table in Star Schema Model.We have requirement to create an hierarchy which pulls from multiple tables
For Eg:
Table:1 P1 P2
Table:2 Q1 Q2
Expected Hierarchy :
P1
Q1
While we try to implement it shows inconsistent results.Can some one let me know the alterante solution to fulfill this requirement.
Thanks,
SatyaB

Your JOIN doesn't work?
You'd have to post what the tables look like, what you're joining on, etc., etc. You aren't supplying enough information.
I am (to put it kindly) a SQL hack. I have found that if I go to a company's dba with my childlike SQL and ask, "Can you improve this?" almost 100% of the time they take pity on me and improve my code to no end. I know that's not what a dba is really for, but they tend to like well formed SQL touching their databases. Failing that, is there someone at your firm that is good with SQL who can help? You're on an Essbase board, not a SQL board, so you are likely not going to get the help you need here.
Regards,
Cameron Lackpour

Create object type from multiple tables for select statement

Hi there,
I have 3 tables as given below and I wish to create an object type to group selected columns as 'attribute' from multiple tables.
I need to create 2 input parameters to pass in - 'attribute' and 'attribute value' in PL/SQL and these 2 parameters will be
passing in with 'column name' and 'column value'. e.g. 'configuration' - the column name, 'eval' - the column value.
Then, the PL/SQL will execute the select statement with the column and column value provided to output the record.
Pls advise and thank you.
table ccitemnumber
name                           null     type
ccitemnumber                   not null varchar2(20)
configuration                           varchar2(20)
item_type                               varchar2(30)
table productmodel
productmodelnumber             not null varchar2(6)
description                             varchar2(60)
accesstimems                            number
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
table topmodel
stmodelnumber                  not null varchar2(30)
productfamily                           varchar2(60
formfactor                              varchar2(10)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapacity_uom                   varchar2(20)
object type in database
configuration                           varchar2(20)
item_type                               varchar2(30)
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapac

user12043838 wrote:
Reason to do this as these fields are required to be grouped together as they are created in different tables. They are treated as 'attribute' (consists of many columns) of the part number. So, the PL/SQL is requested to design in a way able for user to pass in the column name and column value or part number, then the select statement should be able to query for the records. Another reason is a new column can be added easily without keep modifying those effected programs. Reuseable too.This basically equates to ... hard to code, hard to maintain, and poor performance.
Are you really sure you want to do this? This isn't going to be easy-street as you seem to think it is, but it's a one way street to a poorly performing system with security vulnerabilities (google SQL Injection).
I would highly recommend you reconsider your design decision here.

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

How to create xml file from relational tables in 10gR2

Hi,
I am very new to XML and was wondering how to create an XML file from querying relational tables. Some child tables may contain multiple rows that need to be returned in certain instances. Other queries will just be single or multiple rows from one or more tables. I would like to use the latest feathers in 10gR2. Thanks for any help you can provide.
Thanks,
Lee

Here is the first row of data created from our person table - it used the column names as the tag names:
<?xml version="1.0"?>
<ROWSET>
     <ROW>
          <MP_ID_SEQ>289</MP_ID_SEQ>
          <MP_NAME>LOBERG,JUDITH LEE</MP_NAME>
          <MP_SEX>F</MP_SEX>
          <MP_RACE>I</MP_RACE>
          <MP_DOB>19500709</MP_DOB>
          <MP_HT>504</MP_HT>
          <MP_WT>170</MP_WT>
          <MP_EYE_CLR>BLU</MP_EYE_CLR>
          <MP_HAIR_CLR>BRO</MP_HAIR_CLR>
          <MP_SKN>RUD</MP_SKN>
          <MP_SMT>POCKMARKS</MP_SMT>
          <MP_SOC>517607968</MP_SOC>
          <MP_OLN>517607968</MP_OLN>
          <MP_OLS>MT</MP_OLS>
          <MP_OLY>2007</MP_OLY>
          <MP_CAUT_MED>70</MP_CAUT_MED>
          <MP_VISION_SCRIPT>C0RRECTIVE LENSES</MP_VISION_SCRIPT>
          <MP_DNA_AVAIL>N</MP_DNA_AVAIL>
          <CREATED_BY>MMPS</CREATED_BY>
          <DTM_CREATED>31-AUG-06</DTM_CREATED>
          <MI_INC_ID_SEQ>288</MI_INC_ID_SEQ>
          <MP_ALERT>N</MP_ALERT>
     </ROW>

How to create a report from multiple dynamic XMLs

Hi,
I'm trying to build a consolidated report that gets data from multiple XML files and each XML file is different. Although the presentation of the data will be similar, the contents of the XMLs will vary and the number of XMLs to merge will also vary.
What I would like to understand is the following:
* Is it possible to generate a report template based on dynamic columns where the column names, their format and number is different for each business object?
* Is it required to generate an XML with the entire data or can the template read information from different XML files? and if so how it can be done. Please notice that the formatting of each XML may be different.
* Is it possible to use the services to generate the reports directly? Something around these lines was mentioned in one of the sessions but it was also mentioned that it's still WIP.
I've been using the standalone version and although I can get the desired result, I couldn't merge data from multiple XMLs.
Is the new BIP version available, or an enterprise version that I can use?
Thanks in advance,

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

Creating Data Source from MSsql system

Dear all,
I have created a connection between mssql server and my bi system, connection check is ok, when i create a data source and enter a table name in the db, from application server, system does not provide "proposal data" for given table.
When itry to add the column names in db, system deletes the names in the table.
Anything i am missing? Thanks

also when i try to F4 on table field on extraction tab, it gives me error message RSDS_ACCESS034 that is table names ar invalid in db, however it is not.
Diagnosis
The name of the table or view either
contains invalid character(s) or
its length is invalid or
it contains lowercase character(s).
System Response
Invalid names of tables and views are automatically removed from the selection.
Procedure
Table/view names that contain invalid characters such as @ # $ % are not supported. Furthermore, a maximum of 30 characters is allowed in table names. Lowercase characters are not supported.
If the name of the table/view you selected is not supported, create a new valid name for the table/view.

How to Create file link from dynamic table.

Howdy -
I have MySQL database over PHP containing a simple table that lists a group of documents, including their file system address (contained within the site).
I've successfully created a recordset showing this table, and attached that to a dynamic table on a .php page. The display is correct, except I can't get the column contents to link to the document. The column just shows the text (title) of the document.
I've consulted article tn_15364 (http://kb2.adobe.com/cps/153/tn_15364.html), but that doesn't seem to work...
Any thoughts would be appreciated. I'm sure this is pretty simple, but I'm coming up snake eyes.
Charles Andrews

To clarify:
My site has a folder where uploaded files (.doc, .xls, .pdf, etc.) are stored after having been uploaded by a user. During this upload process, the location of these files is stored, along with other identifying data, in a simple database table.
I have a dynamic table created in Dreamweaver that pulls from this database, listing the document name, etc. I would like the document name shown in a column to automatically link to the actual file so a user could just click on it and open the file.
I hope I'm not making sound more complicated than it is -
Thanks,
CWA

Microsoft Access 2010 Creating a Form from Multiple Tables

Hi.
I am brand new to Microsoft Access and have had some exciting success making forms from single tables. This has made my data entry life much easier. However, I am continually stumped on one form I want to make. I would like to make a form that will let me
update which brands retailers are selling. Most of this information is in my SalesHx table. However, my SalesHx table only uses RetailerID and BrandID to record history. The Brand's name (linked to a BrandID) is stored in my Brand Table and the Retailer name
is stored in my Retailer table (linked to a RetailerID). I would like to be able to see the brand's name and the retailer's name when entering in data on a form, since I cannot remember the ids that associate with the names. I have been able to make a form,
with a subform, that displays all of the information I want to see. When I update this form, though, with a new record, it invariably thinks that I am adding an entirely new record, not simply recording a new sales date for an already known brand. Even if
I make the brand name a combo box that is limited to the fields on my table, this still happens. I will have BrandX as brand number 100 and as brand number 300 if I add it in through my sales history form. I am ready to throw access out the window. Can anyone
offer advice?

When I update this form, though, with a new record, it invariably thinks that I am adding an entirely new record, not
simply recording a new sales date for an already known brand.
In what table is the SalesDate recorded?
Build a little, test a little

How to creat Data source from Multiple Tables in SAP BI ?

Similar Messages

Maybe you are looking for