How to Create file link from dynamic table.

Howdy -
I have MySQL database over PHP containing a simple table that lists a group of documents, including their file system address (contained within the site).
I've successfully created a recordset showing this table, and attached that to a dynamic table on a .php page.  The display is correct, except I can't get the column contents to link to the document.  The column just shows the text (title) of the document.
I've consulted article tn_15364 (http://kb2.adobe.com/cps/153/tn_15364.html), but that doesn't seem to work...
Any thoughts would be appreciated.  I'm sure this is pretty simple, but I'm coming up snake eyes.
Charles Andrews

To clarify:
My site has a folder where uploaded files (.doc, .xls, .pdf, etc.) are stored after having been uploaded by a user.  During this upload process, the location of these files is stored, along with other identifying data, in a simple database table.
I have a dynamic table created in Dreamweaver that pulls from this database, listing the document name, etc. I would like the document name shown in a column to automatically link to the actual file so a user could just click on it and open the file.
I hope I'm not making sound more complicated than it is -
Thanks,
CWA

Similar Messages

  • How to create database link from oracle to sql server

    Please help with how to create database link from oracle to sql server
    Best regards,
    Vishal

    Please help with how to create database link from oracle to sql server
    Best regards,
    Vishal
    Hi Vishal,
    I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
    https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
    We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
    Regards,
    Elvis Long
    TechNet Community Support

  • How to Create Check Box in Dynamic Table

    Hi Friends,
    I've Created one Dynamic Table there i want to display 2 columns as Check Box.
    How to Add this check box as column cell variant.
    Looping the columns. In this One method SET_TABLE_CELL_EDITOR is ter. But i'm getting how to use this method. Kindly help in this Issue.
    Regards,
    jack.

    Hi upendra
    There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
    Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
    for(int i=0;i<wdContext.node<tablenode>()..size();i++)
    if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
    else
    wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
    See the attribute is boolean so pass true or false as a values in setter methods.
    Regards
    Kalyan

  • How to get the links from Master table

    Hi,
    I need to show url on the jsp page which should be taken from Backend "Master Table".
    say an example like some value CRM_IMAGE =  ZWEB CRMIMAGE.I need to show CRM_IMAGE as  Hyperlink on the product detail.jsp.
    Can anyone help me for this.
    Regards,
    Deepika
    Edited by: Ecom Dev on Dec 21, 2009 11:05 AM

    Hi Ecom,
    To retrieve value on product detail page you have to develop your custom code in which you have to create BO, BOM, BEI and BEO to access Your master table data from ISA page.
    You also need to create Custom RFC in which you pass porduct ID and retrieve related value from Master Table.
    You can find example in ISA tutorial how to get value from Back-end via JCO.
    eCommerce Developer
    Edited by: Ecommerce Developer on Dec 21, 2009 11:44 AM

  • How to create hyper link to normal table field in webdynpro ABAP

    HI Experts,
    I am working on one Webdynpro Application where I am displaying Vendor information in normal table.
    But I wanted to make LIFNR field of the table as Hyper Link and when I click on that particular LIFNR  I wanted navigate that to XK03 transaction. Please help me out from this...
    When I searched in SDN I am geeting examples to create Hyper Links in ALV but I wanted to create that for normal table field.
    Thanks
    Basanagouda

    Hi,
    As you kept the Link to action.. Go to the Outline of the view and navigate to the to the newly inserted Link to action UI element in the View. Now see the properties window. In the properties you will find the category Events and in this you will have OnAction. You can create a new on action by clikcing on the button which is next to the input filed.
    This will create a method and in this implementaion you can write the logic to navigate to the Transaction.
    Regards,
    Raju Bonagiri

  • How to create File object from InputStream

    Hi everybody
    Can I know a way to create a File object from InputStream object
    Here's my code:
    URL url = loader.getResource(xsdFile); //Thats a schema file..not to worry
    InputStream istream = url.openStream();
    Now from that 'istream' I need to build File object.
    Thank you all

    didn't know fileinputstream was made to read url objects ; in the doc, it just says "A FileInputStream obtains input bytes from a file in a file system." ; according to me, website is something outside the filesystem, but i could be wrong
    edit: thought from the beginning it was all about FILEinputstream whereas it just says "inputstream" in the post ; my bad, it's still early in the morning here X)

  • How to create an Hierarchy from 2 tables in Essbase

    Hi,
    Currently We have 5 dimension tables and one fact table in Star Schema Model.We have requirement to create an hierarchy which pulls from multiple tables
    For Eg:
    Table:1 P1 P2
    Table:2 Q1 Q2
    Expected Hierarchy :
    P1
    Q1
    While we try to implement it shows inconsistent results.Can some one let me know the alterante solution to fulfill this requirement.
    Thanks,
    SatyaB

    Your JOIN doesn't work?
    You'd have to post what the tables look like, what you're joining on, etc., etc. You aren't supplying enough information.
    I am (to put it kindly) a SQL hack. I have found that if I go to a company's dba with my childlike SQL and ask, "Can you improve this?" almost 100% of the time they take pity on me and improve my code to no end. I know that's not what a dba is really for, but they tend to like well formed SQL touching their databases. Failing that, is there someone at your firm that is good with SQL who can help? You're on an Essbase board, not a SQL board, so you are likely not going to get the help you need here.
    Regards,
    Cameron Lackpour

  • How to creat  Data source from Multiple Tables in   SAP  BI ?

    Hi Experts,
    1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
    2. For Inventory tables are           :           MSEG MKPF.
    3. For Invoices MIS   tables are  -          RBKP & RSEG.
    4. For Taxation MIS  tables  are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
    5. For Master data  tables  are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
    How to creat   individual  Datasource  for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices,  4. Taxation , 5. Mater data. ?

    Hi,
    Go for the generic data sources.
    1. first create the view on all the tables.
            You can only use join conditions but not Union.
            you can specify one table as primary table based on your requirement.
    2. build the data source based on the view.
    Regards,
    Siva
    Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

  • How to create a form from a table available from a database link?

    Hi,
    I have a table accessible via a database link.
    It is working perfectly, but I cannot create a from using the wizzard.
    It says: "Primary Key must be specified."
    But there is a primary key in the source database!
    Best regards,
    Sebastien (Geneva)

    a little more about dblink:
    i have a view in the dblink
    when i execute
    insert into ias_time_of_acc(ias29, end_acc_period, start_acc_period, acc_last_date_id, comp_date_id, active)
    values(:p4110_ias29, to_date(:p4110_end_acc,'DD.MM.YYYY'),
    to_date(:p4110_start_acc,'DD.MM.YYYY'),:p4110_last_date, :p4110_comp_date,'N');
    i've got this err:
    ORA-01461: can bind a LONG value only for insert into a LONG column ORA-02063: preceding line from OFSA_OWNER@OFSA_TO_ORCL
    and when i execute
    a:= to_date(:p4110_start_acc,'DD.MM.YYYY') ;
    b:= :p4110_last_date;
    c:= :p4110_comp_date;
    d:= :p4110_ias29;
    insert into ias_time_of_acc(ias29, start_acc_period, end_acc_period, acc_last_date_id, comp_date_id, active )
    values(d, a,to_date(:p4110_end_acc,'DD.MM.YYYY'),
    b, c,'N' );
    everything is working properly
    so problem is in the lenght of insert statment i think.

  • How to create an XML from Source Table

    Hi,
    I am new to ODI and have a requirement as part of our project -
    Say have a table in Source schema with few columns and need to convert the same to XML format and insert the XML as a CLOB column in table of target schema.
    There could also be a case where the XML generated in Source will have to be passed on to Target by calling a web service at target (through ODI)
    Please help with all the steps required to achieve the same.
    Regards,
    Kumar

    HI
    GOOD
    IT IS POSSIBLE IN ABAP
    Extensible Markup Language (XML) is a simple, very flexible text format derived from SGML (ISO 8879). Originally designed to meet the challenges of large-scale electronic publishing, XML is also playing an increasingly important role in the exchange of a wide variety of data on the Web and elsewhere.
    XSD->
    XML Schemas express shared vocabularies and allow machines to carry out rules made by people. They provide a means for defining the structure, content and semantics of XML documents. in more detail.
    XDS->
    XDS can process data images from CCD-, imaging-plate, and multiwire-detectors in a variety of formats. Detector specific Input file templates greatly simplify the use of XDS; they are provided as part of the documentation.
    XDS runs under Unix or Linux on a single server or a grid of up to 99 machines of the same type managed by the MOSIX system; in addition, by using OpenMP, it can be executed in parallel on up to 32 processors at each node that share the same address space.
    http://www2.stylusstudio.com/SSDN/default.asp?action=9&fid=23&read=2926
    /people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
    THANKS
    MRUTYUN

  • How can I create a link from a CHM file to a webhelp file?

    How can I create a link from a CHM file to a webhelp file?
    The CHM output (accreditation.chm) is stored in a parent directory, and the webhelp output (index.htm) is stored in a child directory.

    Open the usual Link dialog and enter the relative path from where the CHM will be installed to where the webhelp will be installed.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How to remove the Personalize link from the table layout displayed on Page.

    While i create a new page and a table layout is created on this page it displays a link called Personalize this table. For every table i create the same is displayed.
    If 10 such table layouts are there i get personalize options on all such 10 layouts on same page.
    If anyone of u knows @ this please help me out how to remove that link from the page.

    You can set the value for the profile FND: Personalization Region Link Enabled / FND_PERSONALIZATION_REGION_LINK_ENABLED to No.
    For additional information, please check the Personalization topic of the Oracle Application Framework Profile Options chapter in the OA Framework developer's guide.

  • How to create a link to multiple links in pdf file

    how to create a link to multiple links or a button to multiple links in pdf file. this links is goto diferent pages, no web. sorry for my english.

    You can print to PDF from the Print Module .
    Do you have Adobe Acrobat?
    Otherwise install (free) Bullzip Free PDF printer.
    http://www.bullzip.com/

  • Help Please - having difficulties creating af link from the text to an attached file i acrobat

    I have been reading the help, but it just wonn't work when I try.
    I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
    1. From the toolbox i choose content and then 'hyperlink'
    2. I mark the text from which i wish to make a link
    3. Acrobat respond with an popup picture 'create a link'
    4. From the popup I mark 'Open a side' and push 'next'
    5. Acrobat respond with a new popup picture 'create / go to a side'
    6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
    7. I mark the to which i wish to make a link to
    8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
    Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
    How do i do it right?
    Please help.

    Hello Bernd
    Thanks for a quick respond.
    This corresponds to the text I have tried myself, but apparently I do something wrong
    1.      Open a PDF that contains a PDF file attachment – done
    2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
    Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
    (I earlier also tried to  mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
    3.      Choose Tools > Content > link, and select the area for the link
    Here  I mark the text on side 10 from which I wish to make a link to a attached file
    4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
    Here I have selected ‘Go to a page view’ as told and I click Next
    5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
    Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
    Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
    What do I do wrong.?
    Med venlig hilsen
    Mogens Pedersen
    Specialkonsulent
    T 33 63 13 07
    F 33 63 10 11
    [email protected]<mailto:[email protected]>
    Fra: Bernd Alheit [email protected]
    Sendt: 2. marts 2012 13:11
    Til: Mogens Pedersen
    Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
    Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
    created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

  • How to create popup link in OAF dynamically or declaratively.

    Can anybody please help how to create a link as popUp in OAF dynamically or declaratively?

    Step 1: Create an OAPopupBean. For example:
    OAPopupBean popupBean =(OAPopupBean)createWebBean(pageContext,POPUP_BEAN,null,"myPopup");
    //Set the following properties on the pop-up:
    popupBean.setID("myPopup");
    popupBean.setUINodeName("myPopup");
    String popupRegion= "/oracle/apps/fnd/framework/toolbox/labsolutions/webui/TestEmpDetailsRN" ;
    popupBean.setRegion(popupRegion);
    popupBean.setHeight("130");
    popupBean.setWidth("320");
    popupBean.setTitle("Test");
    popupBean.setType(EMBEDDED_POPUP); /* Embedded type */
    Step 2: Select the item (messageStyledText, image, link, or button) on which you want to enable the pop-up, and set the following properties, as shown in this example:
    OATableBean tableBean = (OATableBean)webBean.findChildRecursive("ResultsTable");
    OAImageBean image = (OAImageBean)webBean.findChildRecursive("UpdateImage");
    image.setPopupEnabled(true);
    image.setPopupRenderEvent("onClick");
    image.setPopupID("myPopup");
    Step 3: Add the pop-up as an indexed child of the region that contains the item on which the pop-up is enabled.
    Note: If you are enabling a pop-up on an item within a classic table, advanced table or HGrid, then you must add the pop-up and the item on which it is enabled to a layout and add the layout as the indexed child of the table.
    In this example, the pop-up is enabled on an image within a table, hence the pop-up is added as a second level indexed child of the table:
    OAStackLayoutBean stackLayoutBean = new OAStackLayoutBean();
    stackLayoutBean.addIndexedChild(popupBean);
    tableBean.addIndexedChild(stackLayoutBean);

Maybe you are looking for