How to create a demand??

Hi,
I am new to MRS,I would like to know how to create demand in mrs?how te resources are allocated?
Regards,
Mehar.

Hi Anais Jaussaud,
Thank you very much for your reply.
My issue now is, after setting the status to Released in Service Request and saved, I checked for the demands in Resource Planning but the released Service Request is not displayed in Demands.
I had performed the settings mentioned above in my first post.
Please help me with what is missing..
Regards,
Maddy

Similar Messages

How to create a Demand in RPA from Service Request?

Hi All,
Could you please explain me how to create Demands to be shown in RPA when Service Request's status is set to Released.
I have done the below mentioned configurations so far.
Marked the "Resource Planning Relevance" in zitem category (copy of SRQI), created a Status profile with Released status with System status "RELE" and assigned this profile to ztransaction type (copy of SRVR).
Generally, Service Orders are referred as Demands and the released service orders are shown in RPA to assign to the most suitable and available service engineer. But our requirement is to create demands from Service Requests instead of Service Orders.
Please explain me how to proceed for this scenario. What are the settings do I have to perform in CRM system?
Kindly help me with your inputs.
Regards,
Maddy

Hi Anais Jaussaud,
Thank you very much for your reply.
My issue now is, after setting the status to Released in Service Request and saved, I checked for the demands in Resource Planning but the released Service Request is not displayed in Demands.
I had performed the settings mentioned above in my first post.
Please help me with what is missing..
Regards,
Maddy

Create manual demand in planning book

Please, can someone tell me how to create manual demand in the interactive planning book. Thanks!!!

Hi David,
Follow the below steps to enter manual demand in planning book.
1) Use transaction /sapapo/sdp94
2) Either you can use selection window or selection profile to load your data(product location combination in a version) for uploading demand.
3) In selection window, select the product, location and version and enter
4) Once your selected items are seen, double click on the location product combination for which demand needs to entered.
5) The data will get populated into the planning book
6) Meanwhile, select your planning book and data view which contains the relevant key figure for which manual demand needs to be entered (say like forecast, demand, dependent demand etc.,)
7) Goto change mode
8) Then enter the suitable demand values in the key figures in the planning book
9) Once the data are entered, save the changes.
Regards
R. Senthil Mareeswaran.

How to create / Insert Leads in CRM On Demand using WSDL in Bpel

Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
Getting following Error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
</part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
</part><part name="detail"><detail><detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log</siebelf:logfilename>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)</siebelf:errorcode>
<siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
<siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</detail>
</part></remoteFault>

Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
Getting following Error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
</part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
</part><part name="detail"><detail><detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log</siebelf:logfilename>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)</siebelf:errorcode>
<siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
<siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</detail>
</part></remoteFault>

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create a query to see Opening stock and closing stock as on particul

Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
Albaik

Hi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover      0IC_C01_Q0001
Range of coverage - quantity      0IC_C01_Q0002
Range of Coverage - Value      0IC_C01_Q0003
Range of coverage of finished goods - quantity      0IC_C01_Q0004
Range of Coverage of Finished Goods - Value      0IC_C01_Q0005
Range of coverage of raw materials - quantity      0IC_C01_Q0006
Range of Coverage of Raw Materials - Value      0IC_C01_Q0007
Obsolete Stock on Hand      0IC_C01_Q0008
Period-dependent requirement coverage      0IC_C01_Q0009
Value of stock on hand      0IC_C01_Q0010
Quantity of stock on hand      0IC_C01_Q0011
Material consumption      0IC_C01_Q0012
Material Movements      0IC_C01_Q0013
Consignment stock: receipts and issues      0IC_C01_Q0014
Valuated stock: receipts and issues      0IC_C01_Q0015
Material stock and movements      0IC_C01_Q0016
Material Movements (Healthcare)      0IC_C01_Q0020
Material Consumption (Healthcare)      0IC_C01_Q0021
Material Availability      0IC_C01_Q0022
Inventory Turnover Frequency (Value)      0IC_C01_Q0023
Consignment Stock Received and Issued per Unit      0IC_C01_Q0024
Material Consumption (Quantity)      0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity)      0IC_C02_Q0002
Range of Valuated Stock (Quantity)      0IC_C02_Q0003
Inventory Turnover      0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer      0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock      0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue      0IC_C03_Q0003
Receipt and Issue Stock in Transit      0IC_C03_Q0004
Receipt and Issue of Blocked Stock      0IC_C03_Q0005
Valuated Stock      0IC_C03_Q0006
Stock in Quality Inspection      0IC_C03_Q0007
Stock in Transit      0IC_C03_Q0008
Blocked Stock      0IC_C03_Q0009
Vendor Consignment Stock      0IC_C03_Q0010
Consignment Stock at Customer      0IC_C03_Q0011
Stock Overview      0IC_C03_Q0012
Stock Overview (as of 3.1 Content)      0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content)      0IC_C03_Q0014
Valuated Stock (as of 3.1 Content)      0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)      0IC_C03_Q0016
Inventory Turnover      0IC_C03_Q0017
Days' Supply      0IC_C03_Q0018
SUS: Vendor Consignment Stock      0IC_C03_Q0019
Scrap      0IC_C03_Q0020
Inventory Aging      0IC_C03_Q0021
Stock Overview - extended      0IC_C03_Q0022
Demand Supply Match      0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover      0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance      0IC_C03_Q0025
Stock Overview: Materials      0IC_C03_Q0030
Average Stock Value Over Time      0IC_C03_Q0031
Stock Overview Over Time      0IC_C03_Q0032
Range of Coverage Over Time      0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM

How to create client stub while deployign EAR on Oracle Application Server

Hi,
I have deployed an EJB on Oracle Application Server 10g 10.1.2.0.2. And i want to call this ejb from other app server using ejb client. For that i need client stub.
Is there any way I can create client stub while deploying EJB on the OC4J?
I am sure there will be some options.
Thanks and Regards
AT

Amit,
It depends on which transport protocol you use to transmit both the client requests and the server responses: either IIOP or ORMI.
Here's how it works: if you've chosen the IIOP protocol, the client stubs are generated at deploy time and stored in the iiopClient.jar file. Once created, you append this file to your java client's classpath.
Now, if your choice is ORMI, the client stubs are created on demand by the container, so there is no need to append any jar file to the client classpath.
Consult the OC4J Services Guide in the Official Oracle Application Server docs for further inforrmation on this topic, specially the "Remote Method Invocation" chapter.
RB

How to create a database in ORACLE 8i

How to create a database in ORACLE 8i

hello ...
enter in
http://www.oracle.com/pls/db102/portal.portal_db?selected=2 between demand and type in "create database"
or read others docs ORACLE.
AF

Can anyone share how to integrate Demantra Demand Management to EBS R12?

Hi all,
Can anyone suggest how to integrate Demantra Demand Management to EBS R12?
I use Demantra 7.2 and EBS R12.
I search in Manual and in some blogs but not much data support. If possible, I want step-by-step starting from set up such as setup the instance.
More of my concern are;
- Is Demantra can integrate with MRP, without APS or ASCP?
- Is that necessary to integrate by using seed data? If I implement my series with all new series, how can I suppose to link them to EBS?
Thank you in advance.
Best Regards,
Tanya T.

Hi Tanya,
To begin with, you can refer to the Metalink doc 434991.1 for an in-depth explanation on the integration from a technical perspective. Apart from this, there is an ocean of knowledge in the Demantra Documentation libraby in the metalink.The Implementation Guide provides an overview of the integration processes that synchronize or move data between Oracle Demantra and E-Business Suite applications.
Now coming to your concerns:
- Can Demantra be integrated with MRP, without APS or ASCP?
After going through the above mentioned documents on Demantra, if you still want an integrated instance of Demantra and MRP without using APS, then it will have to be a highly customized solution.This scenario will obviously have a great impact on various business aspects,which is out of scope of this discussion.
- Is it necessary to integrate by using seeded data?How to link new series to EBS?
The Demantra - EBS integration adds two new responsibilities for Demand Management viz. i)Demand Management System Administrator and ii)Demand Analyst.
The System Administrator creates a new user in the E-Business Suite with the relevant responsibility for which the user is automatically created in Oracle Demantra.
The user with "Demand management system Administrator" responsibility can create new series that get added in the Demand management component on creation. This series can then be used as per requirement.
I hope my comments help.Feel free for further discussions.
Regards,
Shekhar

How to create dynamics columns in oracle query1.

hi,
how to create dynamics columns in oracle query.its very urgent.
regards
prasad..

Urgent is it?
Why? Have you forgotten to do your coursework and you'll get thrown off your course if you don't hand it in today?
What makes you believe that your request for help is more important than someone else who has requested help? It's very rude to assume you are more important than somebody else, and I'm sure they would like an answer to their issue as soon as they can get one too, but they've generally been polite and not demanded that it is urgent.
Also, you assume that people giving answers are all sitting here just waiting to answer your question for you. That's not so. We're all volunteers with our own jobs to do. How dare you presume to demand our attention with urgency.
If you want help and you want it answering quickly you simply just put your issue forward and provide as much valuable information as possible.
Looking at your post you haven't told us what database version you are using, you haven't provided any create table DDL's and insert statements to populate that with sample data, and you haven't even shown us that you've had a go at doing something yourself.
You will find if you post on here demanding your post is urgent then most people will just ignore it, some will tell you to get lost, and some will explain to you why you shouldn't post "urgent" requests. Occasionally you may find somebody who's got nothing better to do who will actually provide you with an answer, but you really are limiting your options by not asking properly.
/rant
As a basic example of dyanamic SQL:
DECLARE
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
BEGIN
-- Parse the query.
DBMS_SQL.PARSE(cur, 'SELECT hiredate, sal FROM emp', DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
FOR colind IN 1 .. ncols
LOOP
DBMS_OUTPUT.PUT_LINE (cols.col_name);
END LOOP;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
/

How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

How to create planning area?

Hi Gurus,
What is transaction to look for existing planning area?
How to create planning (new version) in Demand Planning?
How to copy a existing version (000) to a new version (010)?
Thanks
Gowda

Hi Gowda,
Check the following Tcodes
/SAPAPO/MSDP_ADMIN
/SAPAPO/VERCREATE
/SAPAPO/MVM
and follow the steps as in best practises http://help.sap.com/bp_scmv250/BBLibrary/HTML/DPL_EN_DE.htm for more details.
Hope this helps

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

Anyone has ideas how to create Google Calendar as an embedded web applet

Hello...
Anyone has ideas how to create Google Calendar as an embedded web applet in CRM On Demand? I would like to create an embedded web applet to show up the user's Google Calendar. I may have users Google credentials saved in its user record of CRMOD.

This can be enabled with InBound SSO implementation where your CRMOD Credentials and Google Apps Credentials are mapped.
if it would help consider reading something on OpenSSO on SAML for this requirement
Regards.
Deepak H Andeli

How to create a demand??

Similar Messages

Maybe you are looking for