How to create a document on a characteristic and key figure combination?

Hello,
I will need to create for my customer a document on a characteristic and key figure combination. I don't know yet which BW objects will be concerned, but I'm trying to understand how it works.
1) I call the document screen in RSA1.
2) I select InfoProvider data.
3) I click on Create, enter a name and a description and go to the next register (Log.DOc.Properties).
Question: What do I need to select here?
According to SAP Help, the following has to be maintained:
InfoProvider: How can I get my cube diplayed in the list?
Query: Same question. But is it necessary to select a query?
Key Figure: OK
All characteristics for which the Characteristic is Document Property indicator is set: OK
Hide Name: OK
Thanks in advance for you help, Nathalie

There's a link on the main support.mozilla.org page under "Customizing Firefox", to this article: [[How do I customize the toolbars?]] in case it helps you or anyone else finding this topic. It has a section on adding a new toolbar to Firefox.
I can't help you on creating your own button, textfield and a combo box for the new toolbar but I see you (Dinesh) asked this question on Jan 5, here:
http://groups.google.com/group/mozilla-labs-jetpack/browse_thread/thread/0d877e5afcbfe745# ''how to create a toolbar using add on sdk''

Similar Messages

  • How to create a new Characteristic and  Key figure ?

    Hi !
    I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

    Hi,
    Instead of RSA1, use RSD1 to create Characteristics & Key figure.
    1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
    2. Enter name of the same & click on create transaction.
    3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
    4. always copy new key fig. or characteristics from standard.
    5. after creation activate the key figure.
    Hope this steps will help you to create Char. & key fig.
    Regards
    Sujay

  • How to add the required characterists and key figures to drill down report?

    hi,
    i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

    Hi Inna,
    Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
    layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
    Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
    Thanks for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • How to create shipment document with out inbound delivery document

    Dear Friends
    How to create shipment document with out outbound/inbound delivery document.
    In my client scenario, there is no inbound delivery for normal purchases.
    Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
    Can we do shipment creation with reference to PO?
    If it is possible, how it will be?
    Please let it solve
    With regards
    Lakshmikanth

    Dear Sameer,
    Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
    Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
    After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
    For more information please go through this SAP help link
    Note:- Shipment process need to be carry out for the deliveries before PGI.
    http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    I hope this will help you,
    Regards,
    Murali.

  • How to create a document folder using ListData.svc

    Hi All,
    I've recently been put on a project where I need to use the REST services (ListData.svc) to retrieve and add documents to the document library. It all has been smooth sailing until I hit the point where I want to save a document in a path that doesn't exist.
    I get an error if I try to save a file where the folder structure doesn't exist. I then went about it a different way trying to create the folder structure first. This also didn't work and I get an error message saying that the entity type is marked with the
    MediaEntry attribute but no save stream was set for the entity. Not too sure what set for the save stream if I'm just adding a folder.
    So my question is can a file be added to a folder structure that doesn't exist where it automatically creates the folders. If not can the service create folders?
    Some sample code I've been using:
    var folder = new SampleDocumentLibraryItem();
    folder.Name = "Sample";
    folder.Title = "Sample";
    folder.ContentType = "Folder";
    folder.Path = "/sample/folder1/folder2";
    spContext.AddToSampleDocumentLibrary(folder);
    spContext.SaveChanges();
    Thanks in advance,
    Damo

    Hi All,
    Finally managed to figure this one out. For anyone who needs source on how to create a document folder. Some sample source is below...
    var folder = new DocumentLibraryItem();
    folder.Name = "Folder Name";
    folder.Title = "Folder Name";
    folder.ContentType = "Folder";
    folder.Path = path;
    spContext.AddtoDocumentLibrary(folder);
    spContext.SetSaveStream(folder, stream, false, folder.ContentType, folder.Path + folder.Name + "|0x0120009BCC19899CEBC6468FF4EEAC7B8CF4F5"
    spContext.SaveChanges();
    So the important differences in the code above. The content type of the object and stream MUST be set to "Folder". I'm not sure why but you still need to set the save stream to be a valid stream even though you're only adding a folder. So just keep the stream
    open and then pass "true" to close it when you actually save the file. The other important element as noted from the URL's in the previous comments is you need to add a "|" + Content Type ID of a folder. You'll be able to get this ID by visiting the rest service
    for an existing document library and view source to see the actual content type id for a folder.
    Thanks everyone for your help,
    Damo

  • How to create a Document Set in SharePoint 2013 using JavaScript Client Side Object Model (JSOM)?

    Hi,
    The requirement is to create ""Document Sets in Bulk" using JSOM. I am using the following posts:-
    http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1904cddb-850c-4425-8205-998bfaad07d7/create-document-set-using-ecma-script
    But, when I am executing the code, I am getting error "Cannot read property 'DocumentSet' of undefined "..Please find
    below my code. I am using Content editor web part and attached my JS file with that :-
    <div>
    <label>Enter the DocumentSet Name <input type="text" id="txtGetDocumentSetName" name="DocumentSetname"/> </label> </br>
    <input type="button" id="btncreate" name="bcreateDocumentSet" value="Create Document Set" onclick="javascript:CreateDocumentSet()"/>
    </div>
    <script type="text/javascript" src="//ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.2.min.js"> </script>
    <script type="text/javascript">
       SP.SOD.executeFunc('sp.js','SP.ClientContext','SP.DocumentSet','SP.DocumentManagement.js',CreateDocumentSet);
    // This function is called on click of the “Create Document Set” button. 
    var ctx;
    var parentFolder;
    var newDocSetName;
    var docsetContentType;
    function CreateDocumentSet() {
        alert("In ClientContext");
        var ctx = SP.ClientContext.get_current(); 
        newDocSetName = $('#txtGetDocumentSetName').val(); 
        var docSetContentTypeID = "0x0120D520";
        alert("docSetContentTypeID:=" + docSetContentTypeID);
        var web = ctx.get_web(); 
        var list = web.get_lists().getByTitle('Current Documents'); 
        ctx.load(list);
        alert("List Loaded !!");
        parentFolder = list.get_rootFolder(); 
        ctx.load(parentFolder);
        docsetContentType = web.get_contentTypes().getById(docSetContentTypeID); 
        ctx.load(docsetContentType);
        alert("docsetContentType Loaded !!");
        ctx.executeQueryAsync(onRequestSuccess, onRequestFail);
    function onRequestSuccess() {       
        alert("In Success");
        SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
        alert('Document Set creation successful');
    // This function runs if the executeQueryAsync call fails.
    function onRequestFail(sender, args) {
        alert("Document Set creation failed" + + args.get_message());
    Please help !!
    Vipul Jain

    Hello,
    I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
    Value cannot be null.Parameter name: context"...
    Also, I tried removing SP.SOD.executeFunc
    from my code, but no success :(
    Kindly suggest !!!
    Vipul Jain

  • How to create a hirarchy for this characteristic having lengh 50?

    Hi guru's
    I have a scenario like characteristic is having lengh 50.Now I want to create a hierarchy for this characteristic.
    But Hirarchy allows maximum lengh 32chrs only.
    So could you please let me know how to create a hirarchy for this characteristic having lengh 50?
    Thanks in advance
    Sivanand

    Isn't this the same question as here:
    Hi all, Have a problem, Please let me know urgently.
    Why the duplicate postings with different names??

  • How to create matreial document for ten line items (10 documents) by BAPI

    Hi
    how to create matreial document for ten line items (10 documents) by BAPI_goodsmvt_create
    i created but it gives error as "no ites were transferre
    and i need code also.
    thanks in advance

    Prabhu Peram wrote:>
    > >
    Gareth @ Atos Origin UK wrote:
    > > Prabhu,
    > >
    > > You have been on SDN a long time and have a decent amount of points - why do you feel the need to simply cut and paste standard SAP documentation? _-----> I least bother abt the Points, and i never ask somebody to give points to me , if u have any doubt on it , u can check all my postings ? All it does is fill up the SDN servers with replicated data which the original poster could quite easily access themselves via SE37----> Sorry I have seen ur Posting/Reply,dont assume that i do copy & paste for sake of Points.Njoy SAP.>
    > > Gareth.
    >
    >
    >
    > regards
    > Prabhu
    Prabhu.
    I didn't question you about points at all - I was making the point that you have been on SDN a long time and have a lot of points.  Therefore you should know better than to simply cut and paste standard SAP help.  If you don't copy and paste for sake of points, what do you do it for?  It serves no purpose other than to fill up the servers here on SDN.  The original poster appears to have access to a SAP system and SE37 and wants to know how to call a BAPI - they can easily go to SE37 and read the documentation themselves.  Posting it here just adds noise and makes searching harder, as well as taking up more and more space on SDN servers.
    Gareth.

  • How to create FI Document in Idoc.....

    Hi Abapers,
    I hve small doubt that
    how to create FI Document in Idoc.....?????s
    I was new to the Idoc creation .......
    can u give me step by step process..............
    Thanks & Regard
    Ravi Sarma

    Hi Rahul,
    As per my understanding you are loking for creating the IDOC per FI document.
    So if in case the multiple rows have retrived from Oracle Join query then Multiple IDOCs to be created. Per row one IDOC.
    You can do this just by changing the Occurance of IDOC
    Export the XSD structure of imported IDOC from IR and modify the occurance of IDOC field as below example
    <xsd:element name="IDOC" type="ZTEST_IDOC.ZIDOC" maxOccurs="unbounded" />
    Then Import the xsd file as external defination and use it directly in mapping.
    It will create the multiple idocs  with mapping Row field of Oracle structure to IDOC field
    Thanks
    Swarup

  • I would like to ask how to create ASP documents

    Dreamweaver CC without the ASP option, I would like to ask how to create ASP documents
    Thanks

    Tao Yi wrote:
    Dreamweaver CC without the ASP option, I would like to ask how to create ASP documents
    Use desktop version.

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create a table with datatype blob and insert a pdf file (ravi)

    how to create a table with datatype blob and insert a pdf file,
    give me the explain asap
    1.create the table?
    2.insert the pdffiles into tables?
    3.how to view the files?
    Thanks & Regards
    ravikumar.k
    Edited by: 895044 on Dec 5, 2011 2:55 AM

    895044 wrote:
    how to create a table with datatype blob and insert a pdf file,
    give me the explain asapPerhaps you should read...
    {message:id=9360002}
    especially point 2.
    We're not just sitting here waiting to answer your question as quickly as possible for you.

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

Maybe you are looking for