How to create a mapping for a select statement containing DENSE_RANK( )?

Hi,
I want help with a select statement that I want to make a mapping of in OWB 11.1 g. Can anyone please tell me how is code can be incorporated in a mapping?
SELECT DISTINCT MAX (dimension_key) KEEP (DENSE_RANK FIRST ORDER BY day DESC) OVER (PARTITION BY calendar_week_name),
MAX (day) KEEP (DENSE_RANK FIRST ORDER BY DAY DESC) OVER (PARTITION BY calendar_week_name), calendar_week_end_date, calendar_week_number
FROM time_dim;I have been trying to use the Aggregator operator but I am not entirely sure how to go about it. Any help will be highly appreciated.
Thanks in advance,
Ann.

Hi Ann
You can just use an EXPRESSION operator. Configure the mapping to be set based only code generation and operating mode.
You will have an expression output attribute for each one of your projected columns;
MAX (dimension_key) KEEP (DENSE_RANK FIRST ORDER BY day DESC) OVER (PARTITION BY calendar_week_name),
MAX (day) KEEP (DENSE_RANK FIRST ORDER BY DAY DESC) OVER (PARTITION BY calendar_week_name),
calendar_week_end_date,
calendar_week_number
Cheers
David

Similar Messages

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

How to create MIN/MAX limitations in SELECT statement ??

Hey,
I have a table which rank90 (city population ranked from 1>*) and state_abrv which has the corresponding state for each city rank.
Is there a way to select only the maximum AND minimum ranks for each state ??
I realise there is a max and min function, but i need to do it for EACH state_abrv.
An example say Los Angeles is ranked 2, San Diego is ranked 6, and San Fransico is ranked 14 (All of these citys are in california (CA)). How do i display a table which lists only Los Angeles (Highest rank) and San Fransico (lowest rank) but DOESNT list San diego ??
Thanks, you guys are helping me heaps and im starting to learn a lot more :P
Message was edited by:
user495524

SQL> create table t (state varchar2(2), city varchar2(20), n number);
Table created.
SQL> insert into t values ('CA','San Francisco',14);
1 row created.
SQL> insert into t values ('CA','San Diego',6);
1 row created.
SQL> insert into t values ('CA','Los Angeles',2);
1 row created.
SQL> insert into t values ('NY','Buffalo',4);
1 row created.
SQL> insert into t values ('NY','Syracuse',7);
1 row created.
SQL> insert into t values ('NY','Mt Kisco',2);
1 row created.
SQL> insert into t values ('NY','Albany',5);
1 row created.
SQL> select * from t order by state, n desc;
ST CITY                          N
CA San Francisco                14
CA San Diego                     6
CA Los Angeles                   2
NY Syracuse                      7
NY Albany                        5
NY Buffalo                       4
NY Mt Kisco                      2
7 rows selected.
SQL> select state, city, n from
2    (
3    select t.*, min(n) over (partition by state) min_n,
4      max(n) over (partition by state) max_n from t
5    )
6 where n in (min_n, max_n) order by state, n desc;
ST CITY                          N
CA San Francisco                14
CA Los Angeles                   2
NY Syracuse                      7
NY Mt Kisco                      2
SQL>

Need to create a transaction for multiple select statements?

Hello,
I am a newbie and have a question about database transaction, e.g. whether/not to enclose multiple select statements (and select statements only) into a transaction.
My database is set to transaction isolation level 2: REPEATABLE READ, where dirty read & non-repeatable read are not allowed, only phantom read is allowed.
Now, in my code I have a number of methods that only contain select statements only. Since they are merely select statements, which don't do any modifications to the data, I am not sure if I am supposed to enclose them into a transaction.
However, if I don't put them into a transaction will the transaction isolation level takes into effect automatically when another user is modifying the data that I am reading? In other words, I need to make sure the select statements will never do either dirty read or non-repeatable read. But I am not sure if it is necessary to enclose multiple select statements in a transaction, since I believe putting the select statements into a transaction will put some locks to the data being read which may reduce the concurrency of my application.
Any help/advice would be very much appreciated.
Duane

You might want to try asking this on a forum that specific to your database. I suspect the answer can vary depending on the database and probably requires in depth knowledge of what the database does.

How to create a sequence inside a select statement

I have the following query
select
t.id_trato2 as DEAL_ID, --
1 as SEQ_NO
from treats t
order by id_trato2, seq_noIt will return for example
id_trato2 seq_no
3 1
3 1
4 1
4 1
4 1
I need it to return
id_trato2 seq_no
3 1
3 2
4 1
4 2
4 3
¿how can I do this?

I need to get it as a sequence for every key (in this case id_trato2).
Results without ordering could be in this order
4
3
4
2
1
3
2
2
I need to get results in this way
4 1
3 1
4 2
2 1
1 1
3 2
2 2
2 3
if I invoke the order statement should return this
1 1
2 1
2 2
2 3
3 1
3 2
41

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
<b>Procedure to create a TCODE for ZTABLE:</b>
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
<u><i>Se93 --> then which radio button to be selected</i></u>
Select the parameter transaction as a radio button.
<u><i>what is the program nam e to be given</i></u>
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to create Search Help for a field in Table control !!

Hello Friends,
              I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include           ZSRO_MPRN_SEARCH                                 *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
        stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE.                    "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
       stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     break gblap0.
     ws_dynpfld-stepl = mprn-current_line.
     LOOP AT i_mprn.
       MOVE i_mprn1-mprn TO i_mprn-mprn.
       MOVE ws_postcode TO i_mprn-post_code.
       MODIFY i_mprn INDEX
                mprn-current_line." transporting MPRN POST_CODE.
     ENDLOOP.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE.                    "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
          gntc LIKE iflot-zzgntc,
        END OF lt_gntc.
CLEAR:   lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZZGNTC'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select Gas Nomination Type Code'
      value_org       = 'S'
    TABLES
      value_tab       = lt_gntc
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE.                    "GNTC_F4 INPUT
*&      Module mprn1_f4 INPUT
      text
MODULE mprn1_f4 INPUT.
DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
        lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
        stepl_index1 TYPE systepl.
DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
         ws_dyname1     LIKE d020s-prog,
         ws_dynumb1     LIKE d020s-dnum,
         ws_dynpfld1    LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
         lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
         stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-MPRN'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " mprn1_f4 INPUT
*&      Module pstlz1_f4 INPUT
      text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
          lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
          stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-POST_CODE'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " pstlz1_f4 INPUT
Regards,
Prakash.

How to create a map in SAP BI???

Dear SAP BI Experts,
I have a difficulties to make a map in BI and missed the steps procedure how to create a map. I have an ESRI CD Map and Arc VIew application. What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
So sorry for stupid question!!!
Thank you very much for your time and help.
Best Regards,
Rudy (SAP BI Team)

Hi Nirmansyah,
Please check the below link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
Hope this helps.
Veerendra.

How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?

Sir,
How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?
Regards

Hello Every Body!
I succeeded in getting connect to the ms access database in adf application in jdeveloper as below:
First in control panel to to admin tools and go to data source(odbc) and create system dsn as bellow pic
Then go to jdeveloper resources ide conn and then database and new database conn and then select jdbc-odbc briddge and then give custom jdbc url as bellow pic
Cheers
tanvir

How to create a attribute for a table

I am created a table with four columns.
How to create a attribute for each column.........

Hi Cranjith Kumar,
First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
Reward points if useful.
Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM

How to create a mapping for a select statement containing DENSE_RANK( )?

Similar Messages

Maybe you are looking for