How to create Multiprovider in BI7

Hi all,
Could anyone tell me how to create multiprovider in BI 7.Please provide me the steps or any document.
Thanks,
Manjula

Hi,
1. Create an InfoArea to which you want to assign the new MultiProvider.
2. Choose Modeling InfoProvider.
3.   In the context menu of the InfoArea, choose Create MultiProvider.
4.   Enter a technical name and a description.
5. Choose Create.
6.   Select the InfoProvider that you want to form the MultiProvider. Choose Continue. The MultiProvider screen appears.
7. Use drag and drop to transfer the required InfoObjects into your MultiProvider. You can also transfer entire dimensions.
8. Use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
In a MultiProvider, each InfoObject in the MultiProvider must correspond to exactly one InfoObject in each of the InfoProviders involved (as long as it is available in the MultiProvider). If this mapping is not clear, you have to specify the InfoObject to which you want to assign the InfoObject in the MultiProvider.
9. Save or Activate the MultiProvider. Only active MultiProviders are available for analysis and reporting.

Similar Messages

How to create hierarchy on bi7 by using dtp

how to create hierarchy on bi7 by using dtp

Hi Deba,
Procedure to create Hierarchies:
1.      In the Data Warehousing Workbench under Modeling, choose the InfoObject tree.
2.      If you have assigned the hierarchy basic characteristic to an InfoObject catalog, select the corresponding InfoObject catalog for an InfoArea.
If the hierarchy basic characteristic does not belong to an InfoObject catalog, choose the InfoArea Non-Assigned Nodes and the InfoObject Catalog Non-Assigned Characteristics.
3.      Select the characteristic for which you want to create a hierarchy and choose Create Hierarchy from the context menu. The Create Hierarchy dialog box appears. The InfoObject name appears by default.
4.      Enter a hierarchy name and description (short, medium, long). Other fields may be displayed, depending on which hierarchy properties were selected for the hierarchy basic characteristics
Fields used to enter the Validity (valid to, valid from) for the hierarchy property Total Hierarchy Time-Dependent
Fields used to specify the Hierarchy Version for the hierarchy property Hierarchies Version-Dependent.
5.      Confirm your entries. The Maintain Hierarchy screen appears. You can define the structure of a hierarchy here.
6.      To create a hierarchy node, you first need to choose an insertion mode: Insert as First Child or   Insert As Next Neighbor (see Hierarchy Editing Functions).
7.      Choose the type of node you want to create: Text Node, Characteristic Node, <Hierarchy Basic Characteristic Node> or Interval (see Hierarchy Nodes)
8.      Repeat this procedure until the hierarchy structure has been set. For more information, see Modeling Nodes and Leaves.
A hierarchy can contain 50,000-100,000 leaves at most. If your hierarchy is larger, you should insert a level that is used as a navigation attribute or preferably as a separate characteristic in the dimension table.
9.      You can use Level Maintenance and Hierarchy Attributes to set how the hierarchy is to be displayed and processed in reporting (see Level Maintenance and Hierarchy Attributes).
10.      Save the hierarchy.
11.      Activate the hierarchy. See Editing Hierarchies.
For more info
[http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a6736e07211d2acb80000e829fbfe/content.htm]
[http://help.sap.com/saphelp_nw70/helpdata/EN/e6/951d102a6c11d5b2e40050da4c74dc/content.htm]
Regards,
Rajkandula

How to create multiprovider in BI 7.0 using two cubes

Hi all,
how to create multiprovider in BI 7.0 using two cubes?

Go to the infoarea you want and right click and click create a Multiprovider.
In the deifiniton of MP, choos ethe two infocubes you want to add and continue.
Choose the dimensions you want to include in your MP.
Add the characteristics you want to include in the dimensions.
Add key figures.
Then identify which cube the characateristics and keyfigures should come from and activate.
search the forums also.

Does any one know how to creat hierachy in 7.0

Hi Gurus
Please some one can help me how to create hierachy in BI7.O
I am new to BI7.0 and have requirement to create hiearchy and we are loading hiearchies through flatfiles.But we are not loading from OLTP system
Please send me If you have any docs related to hierachy
Thanks in advances
Regards
Krish

Hi Krish,
Refer to the link below for details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
regards...

How to Create a MultiProvider in BW?

Hi,
I need details how about multiprovider and also i need information how to create it?
Thanks,
Arun.M.D

Dear Arun,
A MultiProvider is a type of InfoProvider that combines data from a number of InfoProviders and makes it available for reporting purposes.The MultiProvider does not itself contain any data. Its data comes entirely from the InfoProviders on which it is based. These InfoProviders are connected to one another by a union operation. A union operation is used to combine the data from these objects into a MultiProvider. Here, the system constructs the union set of the data sets involved. In other words, all values of these data sets are combined.
For more information regarding MultiProviders, visit the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Reward points if this is helpful.
Regards,
Naveen.

How to create a Multiprovider?

Hi All,
I need details about how to create an multiprovider?
Regards,
Arun.M.D

Hi Arun,
MultiProvider is a special InfoProvider which combine data from several InfoProviders for its own reporting, without actually holding any physical data itself (i.e. its data comes exclusively from the InfoProviders on which it is based), then, it can only use an InfoProvider that is ready and available for reporting, in which case, the Transactional ODS object is not one of them. Therefore, to include a Transactional ODS object in a MultiProvider, you would have to first define an Infoset for the Transactional ODS object.
A MultiProvider can be made of of various combinations of the following InfoProviders:
1. InfoCubes
2. ODS Objects (Standard only)
3. InfoObjects
4. InfoSets
You can start by creating a multiprovider by right clicking the Infoarea and choosing the create multiprovider option. Creating a multiprovider is similar to creating a cube as you need to choose chars and KF from the base objects and then assign the dimensions. The additional steps to do are configure the Identification (for chars) and Selection ( for KF) screens.
Check the below Links:
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=112824&messageID=2357063
https://forums.sdn.sap.com/click.jspa?searchID=112824&messageID=2405186
Hope This Helps.
Regards,
Ravikanth

How to create a authorization role for new Multiprovider

I have a new InfoCube and a new Multiprovider on top of that cube. I would like to find how to create a role for new New Multiprovider. Can someone please provide me the step by step procedure to do this.
Thanks
Arjun

Hi,
You can check if there is a log when creating virtual machines. Hyper-V event logs are stored in the Event Viewer under "Applications and Services Logs", "Microsoft", "Windows". If yes, you can create a event rule monitor for that.
http://technet.microsoft.com/en-us/library/hh457593.aspx
Niki Han
TechNet Community Support

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

How to create Structures in Bex in BI7,

Experts,
can some one explain me in breif how to create structures in BI 7 also can we create a variable on 0FISCPER if so how.
also if some one had a quick look document on bex reporting in BI 7 please forward it to [email protected]
Thanks in Advance
Ravi

http://help.sap.com/saphelp_nw70/helpdata/en/c1/759b3c4d4d8d15e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/e2bebb41da1d42917100471b364efa/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f1/0a5632e09411d2acb90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/7127d2b5263457e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/82/02223c5f00612be10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/44/4fc09c78ef4e35e10000000a1553f6/frameset.htm

How to Create authorization WAD template for BW3.5?

Hi All
How To create Authorization for a Web template in Bw 3.5 ?
I have a requirement to restrict a particular Web templated in bw 3.5 So that all the end users should not be able to access that template only a particular user should be allowed to view the template?
I cant find any authorization object for the WAD template in bw 3.5 ?
Can anyone tell me the procedure to include the WAD template authorization?
Should i include the authorization template in the Menu - in pfcg??? . i have added the template in the Menu in the PFCG but still it didnt work.
Thanks

As you said, the authorizations for the WAD templates should be given in PFCG roles.
But you have to include the access/authorization details in the authorization objects. WAD templates have been created with including info/multiprovider, info cubes right.. first you have to include these objects inside the Role in PFCG.
S_RS_COMP,S_RS_COMP1,S_RS_MPRO,S_RS_ICUBE.
just assigning WAD template in the menu of the roles is to display when you login with the userid.
Please request your BASIS folks to do the same.
Hope this would help you.

How to create workbook in office 2003?

hi experts,
how to create the workbook step by step in office 2003.
i have query created in BI7.
when i try to copy the sheet and insert the query and save it, it says variable values are changed.
please provide me the step by step to create workbook in office 2003.
regards
venuscm

Hello,
A basic step.
Open BEx Analyzer. -> Open a Query and save as workbook.
Done!
You can add more queries on your workbook.
Click on Design Mode button.
Click on Insert Analysis Grid button.
Click over the Analysis grid created and on DataProvider field, assign the desired query.
Click OK and again on Design Mode button and it's done.
I hope you find this information useful.
Kind regards,
Edward John

How to create queries on multiproviders& what are steps to be taken.

Hi all,
How to create queries on multiproviders& what are steps has to be take care.
Thanks,
cheta.

Hi,
Following scenario for sample for slow moving items for multiproviders.
Slow Moving Item Scenario
You want to define a query that displays all products that have been purchased only
infrequently or not at all. In other words, the query is also display characteristic values for
which no transaction data or only low values exist for the selected period.
Procedure
In the Administrator Workbench;
1. Create a MultiProvider consisting of a revenue InfoCube, containing the InfoObject
Material (0MATERIAL), and the InfoObject 0MATERIAL. The InfoObject must be set as
an InfoProvider in InfoObject maintenance. In other words, you need to have assigned
the InfoObject to an InfoArea. (also refer to Tab Page: Master Data/texts [Ext.]).
In the BEx Analyzer:
2. Select your MultiProvider in the Query Designer.
3. Define a query that contains the InfoObject 1ROWCOUNT in the columns.
The InfoObject 1ROWCOUNT is contained in all flat InfoProviders, that is, in all
InfoObjects and ODS objects. It counts the number of records in the InfoProvider.
In this scenario, you can see from the row number display whether or nor values
from the InfoProvider InfoObject are really displayed.
4. Save the query and execute it. All values are now displayed, including those for materials
that were not purchased.
If you filter by time (0CALYEAR, for example), values from the InfoProvider
InfoObjects are not displayed since 0CALYEAR is not an attribute of
0MATERIAL. You can see this from the absence of values in the 1ROWCOUNT
column in the query. If you want to restrict by time, you need to proceed as
follows:
Constant Selection for the InfoObject
You need to set the constant selection for the 1ROWCOUNT key figure in order to be able to
set a filter by time in this query.
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. On the left hand half of the screen, under the data package dimension, select the
characteristic InfoProvider (0INFOPROV) and drag it into the right-hand screen area.
3. From the context menu for the InfoProvider, choose Restrict, and restrict across the
InfoProvider InfoObject.
4. Also from the context menu for the InfoProvider, choose the function Constant Selection.
5. Save the query and execute it. You can now also set a filter for a time characteristic, the
materials display remains as it was.
Displaying Slow Moving Items
If you want to display a list of slow moving items, excluding products that are selling well, you
need to proceed as follows:
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. Via the context menu for InfoProvider, choose the function Display Empty Values. Also
select Constant Selection.
3. Save the query and execute it. The result is that the system displays the materials for
which there was no revenue.
Displaying Products with Small Revenues
If you want to display a list of products that have not been sold or have only been selling
badly, you need to proceed as follows:
1. Set constant selection as described above, but do not select the display empty values
function.
2. In the Query Designer, define a condition for the 0MATERIAL InfoObject. Specify a value
that is to be the upper limit for a bad sale.
3. Save the query and execute it. The result is that the system displays all materials that
have not been sold or have been selling badly.
Thanks,
Sankar M

How to create DataSource for FlatFile Source Systems

Hi,
I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR.
After creating Appl Comp and when i am trying to create transformations for the master data attribute i am unable to assign data source.I came to know that i have to create datsource at this step.But dont know how to create datasource for FlatFiles.
Can anyone give me stpes how to create DataSource.
Thanks in advance,
Sunny

Hi
Find below help link for procedure
http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
and below are some help links which will be usefull in BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Look at this new features in Bi 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
how to's in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Demo's
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
Report designer new component
Most of ur solutions u can get through help or SDN search
Regards,
Ravi

How to create a cube/ods/infoobjects etc..and also why to create the same

Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
Ramana

Hi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

How to create Multiprovider in BI7

Similar Messages

Maybe you are looking for