How To: Create Report Completely Programmatically AND Save it!!!

Post Author: nicolasiac
CA Forum: .NET
Hi,
I would to know whether Crystal Reports supports the creation of new reports completely programmatically. (I am using Visual Studio 2005)
So far I am only able to create a new blank report programmatically (using Visual Studio 2005) and add it to an existing VS solution.However, I would like to be able to specify the datasource (stored procedure or table), create and add fields to specific locations on the report and then save these changes in the newly created report.I read that there is a Report Application Server.NET SDK but I didn't understand whether this allows the creation of new fields of a report at runtime only or not.
I would like to create the fields of the report comlpetely programmatically (meaning no designer interaction) and save these fields in the report so that it can be opened by another user. (not at runtime)
Please tell me whether this is supported by Crystal Reports or by purchasing a different version of Crystal Reports.
Regards,
Nicolas

Post Author: Ted Ueda
CA Forum: .NET
You can get pretty close to complete report creation/modification with Crystal Reports XI Release 2 Service Pack 2 and KBase 5074668
Sincerely,
Ted Ueda

Similar Messages

How to create Report in master and detail

I have two table
1. order1
2. order2
table order1 fields:- SRNO, PPNO,SUBPP
table order2 fields:- SRNO, SFILE, INVOICE
table order1 I created in tabular and table order2 like form.
order1 has 4 record and order2 has 1 record
like
ORDER1:-
srno, ppno, subpp
1 10 A
1 10 B
1 11 A
1 12 C
ORDER2:-
srno, sfile, invoice
1 102 102-06-2006
i have input data in this shape can you help me how can I print data same as above.
There is no relationship .
Message was edited by:
Kamran

Hi Kamran
take 2 groups in the datamodel .place one below the other in the layout.
Thankyou
[email protected]

How to create Report BI 7

Hi All,
Could you please explain, how to create reports different ways and different object.
Ex:- 1. CKF and RKF
       2. Variables ( Characteristic, Formula and Text Variables )
       3. Structures and cells
       4. Exceptions and Conditions
      5. Processing types and details
Please provide every objects one examples, how to create flexible in reports in BI 7.0.
Thanks & Regards,
Vijaay.

Hi Vijay,
Go through the below SAP Help. Everything has been explained there:
[http://help.sap.com/saphelp_nw04/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm]
Regards,
Pratap Sone

How can you create a voice recording and save it as an mp3?

I want to create a voice recording and save it as an mp3. How can I do that on the MAC? Right now I can only think of recording the voice in iMovie, but it does not have a choice to save as an mp3.

Rather that iMovie, you may want to check our Audacity.
It's a free, open-source audio editor and recorder.
You can easily save a recording as an MP3.
http://audacity.sourceforge.net/
Matt

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to use cfdocument create a PDF file and save the file in server?

Hi,
I want to use cfdocument to create a PDF file and save it in
the server for other people to download,can you give me a idea how
to do this.Thanks.
<cfdocument format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Mark

Hi
<cfdocument filename="" format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Give the physical path to the filename. You have write
permission for this folder to create a PDF file.

How to create Reports and Forms using JSP

Hi,
How to create reports using JSP. And how many types of reports can be created using JSP.Can anyone explain with example please.
Thanks,
Vijayalakshmi.M

Here is some code that creates xml for any SQL that returns a ResultSet. Note this uses my default out-of-the-box XML template, but you can quickly create and use your own templates to generate xml to look anyway you desire.
FormattedDataSet fds=FormattedDataSet.createInstance();
Map miscData=new HashMap();
map.put("rootElement", "musicgroups");
String xml=fds.getFormattedDataSet("select * from groups", miscData, "xml1");
String xml has the value:
<musicgroups>
<row rowID='1'>
<group_id>1</group_id>
<group_name>Rolling Stones</group_name>
<type>Rock</type>
</row>
<row rowID='2'>
<group_id>2</group_id>
<group_name>Beatles</group_name>
<type>Rock</type>
</row>
<row rowID='3'>
<group_id>3</group_id>
<group_name>Led Zepplin</group_name>
<type>Rock</type>
</row>
</musicgroups>steve -
http://www.fdsapi.com - The easiest way to generate dynamic HTML and XML
http://www.jamonapi.com - A performance tuning and scalability measuring API

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.

How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

On transaction FBL3N report change layout and save layout icons not activ

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

Hi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan

Can anybody suggest me how to creat match code id and object

hi Gurus,
can any body suggest me how to create match code object and match code id..
in my program i need specific values in search help..
to avoid confusion in selecting the values.
i need only selcted values..
thanks in advance.
vijay chavan

Hi
In Older SAP versions Match codes are used, now they are replaced by SEARCH HELPs
there 2 types of search helps
Elementary and Collective
see the doc and create accordingly
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.
Regards
Anji

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 end of t_likp.
types: begin of t_lips,
 vbeln type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
 vgbel type lips-vgbel, "Doc no of the reference document
 end of t_lips.
types: begin of t_vbpa,
 vbeln type vbpa-vbeln, "SD DocumenT Number
 posnr type vbpa-posnr, "Item number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 end of t_vbpa.
types: begin of t_kna1,
 kunnr type kna1-kunnr, "Customer Number 1
 name1 type kna1-name1, "Name 1
 ort01 type kna1-ort01, "City
 adrnr type kna1-adrnr, "Address
 end of t_kna1.
types: begin of t_li_vbpa,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 vbeln1 type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
 vgbel type lips-vgbel, "Doc no of the reference document
 vbeln3 type vbpa-vbeln, "SD DocumenT Number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 end of t_li_vbpa.
types: begin of t_final,
 vbeln type likp-vbeln, "Delivery
 erdat type likp-erdat, "Date for rec creation
 kunnr type likp-kunnr, "Ship-To Party
 kunag type likp-kunag, "Sold-to party
 traty type likp-traty, "Means-of-Transport
 vbeln1 type lips-vbeln, "Delivery
 posnr type lips-posnr, "Delivery item
 matnr type lips-matnr, "Material Number
 arktx type lips-arktx, "Short Text for Sales Order Item
 lfimg type lips-lfimg, "Actual quantity delivered
 netpr type lips-netpr, "Net Price
 vgbel type lips-vgbel, "Doc no of the reference document
 vbeln3 type vbpa-vbeln, "SD DocumenT Number
 parvw type vbpa-parvw, "Partner function
 kunnrb type vbpa-kunnr, "Customer Number 1
 name1 type kna1-name1, "Name 1
 ort01 type kna1-ort01, "City
 adrnr1 type kna1-adrnr, "Address
 name2 type kna1-name1, "Name 1
 ort02 type kna1-ort01, "City
 adrnr2 type kna1-adrnr, "Address
 name3 type kna1-name1, "Name 1
 ort03 type kna1-ort01, "City
 adrnr3 type kna1-adrnr, "Address
 end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
 device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
 language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
 canceled = 1
 device = 2
 form = 3
 options = 4
 unclosed = 5
 mail_options = 6
 archive_error = 7
 invalid_fax_number = 8
 more_params_needed_in_batch = 9
 spool_error = 10
 codepage = 11
 others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
 form = 'Z9BT_DELIVERY'
 language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
 form = 1
 format = 2
 unended = 3
 unopened = 4
 unused = 5
 spool_error = 6
 codepage = 7
 others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
 element = 'ITEM_LIST'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
 unopened = 1
 bad_pageformat_for_print = 2
 spool_error = 3
 codepage = 4
 others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
 unopened = 1
 bad_pageformat_for_print = 2
 send_error = 3
 spool_error = 4
 codepage = 5
 others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
 from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
 a~erdat
 a~kunnr
 a~kunag
 a~traty
 b~vbeln
 b~posnr
 b~matnr
 b~arktx
 b~lfimg
 b~netpr
 b~vgbel
 c~vbeln
 c~parvw
 c~kunnr
 into table it_li_vbpa
 from likp as a
 left outer join lips as b on a~vbeln = b~vbeln
 inner join vbpa as c on b~vgbel = c~vbeln
 where a~vbeln in s_vbeln and
 c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
 name1
 ort01
 adrnr into table it_kna1 from kna1
 for all entries in it_li_vbpa_temp
 where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Report Completion date and Report start date in BI Publisher

Guys
We have a requirement to get the Report Completion date and start date without Scheduling the report. Can any one give me an idea to get in the BIP Reports
Regards

What is the requirement ?
When the user run report from BIP EE, you want to display how long the report run ?
or
Where you want to display these info >?
If you expecting these info, on click of viewbutton then i dont think it is possible, unless you write the query to fetch the time and in the template processing, subtract that from the current sys-time to get the time it took to run.
if you can schedule then
Simplest would be is , taking these info from the tables, directly for the report you are running.
or
use Public WS provided by BIP to get the report info
but in order to get these, first of all the reports should be run in scheduled mode.
if you don't want the report to be scheduled then, i don't think, you can get these kind of report completion status info.
otherwise , you can run the query by yourself to get the data and the time it took to complete from database and do some sort of custom calculation by urself

How to create ship to party and sold to party for DC10 during sales order ?

Hello all:
When creating sales order for a material in VA01 with sales Org 1000,
distribution channel 10, division 00
The system does not give me any Ship to Party and Sold to Party with the above combination
How to create ship to party and sold to party with the above combination (Plant 1000,
sales org 1000, distribution channel 10, during creation of a sales order
Ironically, when creating material master for a material with a material type KMAT, plant 1000
sales org 1000, the only distribution channel is populating in the input help (F4) is 10
For which no ship to party neither sold to party is maintained in sales order creation
Thanks in Advance!!

Dear Eshwer
It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute. In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details. Once you give all these datas and save the data, a customer code will be displayed at the bottom.
Now go to VA01, input the sale order type and the sales area and execute.
thanks
G. Lakshmipathi

How To: Create Report Completely Programmatically AND Save it!!!

Similar Messages

Maybe you are looking for