How to create segments
Hi Experts,
XML file contains multiple sales orders (not sorted) where each sales orders can contain 1 to many Items and in turn each item contains 1 to many charachteristics and should be mapped to Idoc ORDERS.ORDERS05.
Number of Idoc's to be generated depends on number of unique V_IN_ORDERNUM and number of items i.e. E1EDP01 depends on unique RIGANUM for a sales order.
my question is how to create the the number of items i,e E1EDP01 segment based on the unique RIGANUM for a sales order
Hello,
my question is how to create the the number of items i,e E1EDP01 segment based on the unique RIGANUM for a sales order
Logic should be similar to this:
RIGANUM -> removeContext -> sort: ascending lexicographical -> splitByValue:valueChanged -> collapseContext -> E1EDP01
Hope this helps,
Mark
Similar Messages
-
How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version
Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
ThanksAnil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh. -
How to create segments programatically?
Hi Folks,
Anyone has any idea on how to create fatwire segments programmatically?
Is there any fatwire tags or asset API methods are available for it?
ThanksSegments are basic asset types. Creating a segment should be equivalent to creating a basic asset.
Have you tried with the usual asset:create, asset:set and asset:save tags?
-Regards,
DFy -
Hi experts,
I am getting XML file in that one field is there that is RIGENO. Based on unique field value i need to create E1EDK03 segment in the under the idoc i tried with the logic
RIGENO---->removecontext>splitvalue--
>idoc
i am getting unexpected result for this case.Please tell me it correct or not if it is not please give me the logic for that.Hi chandramohanreddys
You should use that rule for E1EDK03 segment, not for IDOC node.
Regards,
Giuseppe -
IDOC: How to create child segment with abap code.
Hi,
I'am trying to write an abap code to create segments for an Idoc which structure is the following:
ZLE_00060_DLVY
> E1EDL20
> Z1DEL_CONS
>Z1DEL_MAT_HEADER
> Z1DEL_MAT
> E1EDL20RET2
> E1EDL22
> E1EDL21
> E1EDL23
> E1EDL51
I receive a sintax error: Error in IDoc with status 26 .
Checking the result I note all segment at the same level and an error about the segment E1EDL22
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1EDL22 does not occur at the current level of the basic
type DELVRY05 (extension ZLE_00060_DLVY).
This error can have several reasons:
o The segment E1EDL22 is assigned to a group whose header segment does
not occur.
o The segment E1EDL22 does not exist in the syntax description of the
basic type DELVRY05 (extension ZLE_00060_DLVY).
o The sequence of segments in the group in which the segment appears
is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to
this error.
Procedure
Please check the IDoc or the syntax description of the basic type
DELVRY05 (extension ZLE_00060_DLVY).
After the error I have:
data records
E1EDL20
Z1DEL_CONS
Z1DEL_MAT_HEADER
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
E1EDL20RET2
E1EDL22
E1EDL21
Abap code:
idoc_data-segnam = 'Z1DEL_CONS'.
idoc_data-sdata = s_z1del_cons.
append idoc_data.
idoc_data-segnam = 'Z1DEL_MAT_HEADER'.
s_z1del_mat_header-tsegment = 'MATERIAL'.
idoc_data-sdata = s_z1del_mat_header.
append idoc_data.
clear idoc_data-sdata. <<<<<<<<<<< how to indent the structure because this is a child.
idoc_data-sdata = s_Z1DEL_MAT.
idoc_data-segnam = 'Z1DEL_MAT'.
append idoc_data.
idoc_data-segnam = 'E1EDL20RET2'.
idoc_data-sdata = s_E1EDL20RET2.
append idoc_data.
clear idoc_data.
idoc_data-segnam = 'E1EDL22'.
idoc_data-sdata = s_e1edl22.
append idoc_data.
clear idoc_data.
idoc_data-segnam = 'E1EDL21'.
idoc_data-sdata = s_e1edl21.
append idoc_data.
Any help will be well appreciated.
Thanks in advance.
Regards,
GiovanniHi,
following in debugging mode the abap code of the INCLUDE ZXTRKU02 where is defined the TABLES IDOC_DATA STRUCTURE EDIDD, I find that all field of the table IDOC_DATA are not set. More exactly my expectation is to find values for SEGNUM, HLEVEL, PSGNUM.
In a few words I need to execute an enhancement, via abap code, of the struscure of the idoc before sending it out since I have a requirement to test this enhancement in my XI environment, receiving as input this ideoc modified.
Then, I need to add a new segment and one child.
Any suggestion will be well appreciated.
Thanks in advance.
Regards,
Giovanni -
How to create multiple segments on the target structure of an IDOC
Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
NagaIn message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it. -
How to create master group in Portal - Segment Builder?
Hi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyeeHi All,
May i know how to create master group by using existing target group in segment builder PCUI in portal?
I manage to do it in sapgui:
tc: crmd_mktseg_mgr -> create new master group -> assign existing target group -> execute button -> master group is created.
I tried in portal: click on segment builder tab -> search existing profile set -> open existing profile set -> click on target group tab -> mark one of target groups -> click on Master group button -> save changes -> go back to sapgui crmd_mktseg_mgr -> search for all the master groups -> i dun see result that i did in portal.
Can guide me on this?
Appreciated your guide. Thanks.
Regards,
wyee -
How to create stock in Make to order and make to stock segments?
Hi,
Could u please tell me how How to create stock in Make to order and make to stock segments?
Regards,
ASHi,
If you are processing production order, use tcode MB31with mvt type 101, system will create stock. This method is same for both make to order and make to stock scenarios.
For initial stock upload you can use 501 or 561 mvt for make to stock and for Make to order use same mvt typt with special indicator E.
Regards,
Dharma -
How to create a callback function module
Hi all,
I am working in a requirement where we need to call a function module at a 'after change' event. So how to create a callback function module and register it with the crmvevent ?_
I created a sample function module and try to create entries in table crmv_event_cust, but i got an error message saying that the function module name I provided is not in table CRMC_FUNC_ASSIGN. When I try to create entry there, I got a message that function module is not in CRMC_OBJ_FUNC and that table is a standard table with no maintanance options !!
looks like i am going in wrong way ... can any one please help ??Looking at my system all you need to do is create the entry for the callback function in maint view: CRMV_FUNC_ASSIGN.
Your entry should be as simple as Z-function name Object Function - <same as others in the segment you are assigning>
IE for the partner it would be CRM_PARTNER as object function, for general order processing CRM_ORDER
Take care,
Stephen -
HOW TO CREATE A DFF BASED ON ORGANIZATION
Hi,
I want to create a DFF which would have 5 different context values, i want 2 of them to be available in one organization and other 3 in other organization, how i can achieve this.
Regards,
Usman.Hello,
"HOW TO CREATE A DFF BASED ON ORGANIZATION"
1- I will create a customized table having two columns one is for context name and other is for org_id,
2- then i will create a value set on this table and will use this on 'Value Set' field on 'Descriptive Flexfield Segments' window.
3- In the where clause of this value set i will pass org_id from profile $PROFILES$.ORG_ID,
4- this will restrict the context based on org_id And user will only have context related to there org
I have successfully achieved the above requirment.
Find below the restriction you should follow so that Value set is available in LOVs on "Descriptive Flexfield Segments" window:
Value sets used for context fields must obey certain restrictions or they will not be available to use in the Value Set field in the Context Field region of the Descriptive
Flexfield Segments window:
• Format Type must be Character (Char)
• Numbers Only must not be checked (alphabetic characters are allowed)
• Uppercase Only must not be checked (mixed case is allowed)
• Right-justify and Zero-fill Numbers must not be checked
• Validation Type must be Independent or Table
If the validation type is Independent:
• the value set maximum size must be less than or equal to 30
If the validation type is Table:
• the ID Column must be defined, it must be Char or Varchar2 type, and its size must
be less than or equal to 30. The ID column corresponds to the context field value
code (the internal, non-translated context field value).
• the Value Column must be defined, it must be Char or Varchar2 type, and its size
must be less than or equal to 80. The Value column corresponds to the context field
value name (the displayed context field value).
• the value set maximum size must be less than or equal to 80
All context field values (the code values) you intend to use must exist in the value set. If
you define context field values in the Context Field Values block of the Descriptive
Flexfield Segments window that do not exist in the context field value set, they will be
ignored, even if you have defined context-sensitive segments for them.
Best Regards,
Usman. -
Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1 -
How to create a simple idoc in practice? can you provide an example?
how to create a simple idoc in practice? can you provide an example with full source code?
Try with the follwoing steps
Sending System(Outbound ALE Process)
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Create Model View
Tcode BD82 ¡V Generate partner Profiles & Create Ports
Tcode BD64 ¡V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ³ for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ¡V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ¡V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 ¡V Send Material Data
Tcode WE05 ¡V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Thanks & regards
Sreenivas
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Take a look at this guide.
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Create The Extension Segment
Transaction: WE31
The first step in extending an IDoc is to create the new segments that will go into that IDoc. There are some rules that you need to follow when creating the segments:
- The name of each segment type must start with Z1
- For each field in the segment you need to define a field name and a
data element.
- The data element for the segment structure must be of data type CHAR.
How to create new segments:
Run the segment maintenance transaction WE31.
Type your new segment name, and click on Create.
Define the fields of your segment:
Field name
Data Element for the field (from the ABAP dictionary).
Do not change the Export length!
Save the segment
Run Segment -->Check to check the segment for consistency.
Release the segment for transport. Select Edit -->Set Release. Note that the Release column now has a check mark.
Create the Extension IDoc Type
Transaction: WE30
After you create the segments to be added to the extension type, you can create the extension type itself. Execute transaction WE30, enter the extension name, select Extension type, and click Create. You now have three options:
Create new type: Does not refer to other extension types
Create copy: Copies info from an extension type that already exists
Create successor: Extends an extension type from a previous release
of R/3. You can only have one version of an extension type for
each release.
Enter the Basic IDoc type that this extension type will extend.
The screen now shows the structure of the IDoc type you used as
a reference.
Position the cursor on one of the segments and click Create. This will insert an extension segment as a child of the selected segment.
NOTE: A segment cannot appear more than once in an IDoc type! You must control the use of duplicate segments with the segment attributes (the next screen).
The segment attribute screen appears. Enter the information and save.
Extension segments should not be mandatory (for future upgrades), and will need to have minimum and maximum number of instances defined. This answers the question, for each instance of the parent segment, how many instances of the child segment may we have?
You can press the Segment Editor pushbutton to view or change the segment definition.
Create the new Message Type
You can only use an extension IDoc type by assigning it to a message type. You can create a new message type for this.
First the message type itself needs to be created.
Transaction: WE81
Create a new entry and save. Use SAP established customer naming conventions (good form is to start with a Z and retain the rest of the related SAP message type, so, for example, MATMAS becomes ZMATMAS).
After creating the message type, associate it with the corresponding Basic IDoc Type and Extension Type. This relationship is used when IDocs are sent to or received from a partner to determine what segments are valid and what the hierarchy for those segments is.
Transaction: WE82
Create a new entry and enter the Message type, Basic IDoc type, Extension type, and Release, and save your data. Note: the release assignment is not valid for prior SAP releases.
One message type can be associated with many basic IDoc types; however, you need a one-to-one relationship for distribution via ALE.
regards,
srinivas
*reward for useful answers*</b> -
HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT
Hy,
<b>HOW TO CREATE A USER-EXIT FOR MB31</b>
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.Hi Rawat,
You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert -
How to create a Tip for a field in a Descriptive Flex Field in Self Service
How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
Example :
For Address
Each Address Line should have one Tip.
What should I do ?
Thanks,
JohnHi John,
It seems you have created Address Location DFF in self service in OA Framework.....
I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
I only want to display segments with values . The segments with null values should not display at all...
i.e , if Address Line 2 value is null , it should not display Address Line 2..
If you have done this, pls let me know how to go abt it.
Thanks in Advance,
Tanveer -
How to create a segement in we31 for an Idoc
Hi,
How to create a segment in we31 for an IDOC . I tried its showing an error Name range violation: Name not permitted in customer systemHello,
I have created a customised IDOC scemnario and have a document designed by me with all the minute steps and with screen shots.
Please have a look at http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
I am ready to mail it if you can provide email.
thnx
==============================
Other helpful links
http://www.sapgenie.com/whitepapers/ale.htm
http://www.sapgenie.com/ale/index.htm
http://www.sappoint.com/abap.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/ALE_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAALEHR_ALE_QS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/ECPCA/ECPCA_ALE_154.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
Maybe you are looking for
-
Too Slow - Domino 6.5.4 with access manager agent 2.2 ?
I don't know how to tune Domino 6.5.4 with access manager agent 2.2? I think AMAgent.properties is not good for SSO. Please help me to tune it. # $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $ # Copyright ? 2002 Sun Microsystems, Inc
-
How do I connect via bluetooth my ipad with my Blackberry Torch
How do I connect my ipad to my blackberry torch via bluetooth.
-
Hierarchy failure in "Save hiererachies' step in process chain.
Hi, In process chain I am getting an error stating hierarchy loaded with requestXXXXXXXXXXXXX could not be activated. step: Save hierarchies. even though the above step is in failure state, the chain execution gets completed with status red. temporar
-
Persistent hang problem still unsanswered
SOMEBODY here must have a clue on this one. I've spent weeks on it myself, tried the local Apple Store, had a tune-up from a Mac repair shop and still ... Periodically I will try to eject a CD from iTunes and the application will hang. When I Force Q
-
Hi: I just read a very long Forum post involving Chris Cox from July 2010 regarding the referenced issue; unfortunately the thread had left the problem unresolved in 2010. I have a Nikon D3 camera, Windows 7, CS5, and a Epson R3000 printer. Everythin