How to cusotmize the attribute of being mandatory for master data and order

Hi,everyone
how to make the  un-mandatory field on the verdor master data mandatory?
Also, How  to set to define my own mandatory fields on  purchase order?   I also need to remove the mandatory setting which is pre-set by the system on many docutments&master data.
How to fullfil them.
thank very much

hi
for vendor master
spro>Logistics - General>Business Partner>Vendor>Control>Define Account Groups and Field Selection (Vendor)
or code  OMSG
material master 
OMSR
Purchase Order
Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > here get the Field selection key for the PO Doc type
Now go to SPRO > MM > Purchasing > Purchase Order > Define Screen Layout at Document Level > Here the field selection key, under selection group "GR/IR control", mark "GR-based invoice verification" field as mandatory
hope it help
try asking the questions one by one
regards
kunal

Similar Messages

  • How to delete the sales org information from BP Master Data in SAP CRM 5.0

    Hi Guruu2019s
    How to delete the sales org information from BP Master Data in SAP CRM 5.0
    Thanks...
    Mahesh Pasupunuri

    Hello
    There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
    Regards
    Joaquin

  • How to Flip the Sign using Calculation script for historical data

    I am currently using Essbase 9.3.1. Its required to flip sign for a specific set of accounts for that i am currently using UDA's to flip the sign.
    But now i need to flip the sign for the historical data too. Is there any possible way to flip the sign using calculation scripts for historical data. Kindly let me know your suggestions.
    Many thanks in Advance...
    Edited by: [email protected] on Jul 30, 2009 9:37 PM
    Edited by: [email protected] on Jul 30, 2009 10:58 PM
    Edited by: [email protected] on Jul 30, 2009 11:01 PM

    Of course there is. This is the kind of calc script that only gets run once, so make usre you test it well before doing it on production and make a backup of production before doing it.
    It would be something like
    Fix(time frame, accounts to be flipped, level zero other dimensions)
    actual = actual * -1;
    EndFix
    Cal dim dimensions
    Note, I chose actual, but you could do it for any dimension that has a single or only a couple of members. What ever dimension you choose to do the calculation on, it can't be included in the fix statement

  • How to Identify the Network Topology being used for a running ForeFront TMG Stand Alone array?

    Hello Experts,
    My client has decided to move their datacenter  from one location to other including the ForeFront TMG servers which are being used as Reverse Proxy and TMG Gateway  in DMZ environment.
    I need to know the network topology used for this configuration so that I could chose the same topology when creating new TMG environment at new datacenter. Here are some details : 
    1. There are 2 TMG servers configured in a DMZ Workgroup in Stand Alone array.
    2. Both servers have 3 NIC attached to them. (one has all public IPs configured, another one has internal IP address and the third one has Management IP which is used to connect the server via RDP).
    3. There are more than 50 websites published via this standalone array.
    I am very new to Forefront TMG technology and need to know the Topology used to create such environment.
    Thanks 
    Lalit

    Hi,
    According to your description, you can use the 3-leg perimeter network template and choose which network adapter connects to the LAN, which network adapter connects to the external  network and which network adapter connects to the DMZ.
    Did you set up TCP/IP settings for the three NICs? If not, please refer to the link below:
    Recommended Network Adapter Configuration for Forefront TMG Enterprise Edition Servers
    More information:
    Microsoft Forefront TMG – How to use TMG network templates (Note:
    Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
    Best regards,
    Susie

  • Even though my wi-fi is up and available my mac seems to take it off the list after being idle for a while and does not auto re log on no matter how many times i enter it in preferences

    Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
    HELP this is so…so… anoying .

    Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
    HELP this is so…so… anoying .

  • How to delete the duplicate email address in BP master data

    Hi,
    When  you get an email ids from the third party vendor and you are loading into CRM BP master data.  how to delete the duplicate email address already exits in the system.  In CRM you can create the same BP with different id.   I would like to know how to delete the email address during importing email addresses from the third party tool.
    During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data. 
    If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
    thanks,
    arul

    Hello Arul,
    welcome to the SDN CRM Development forum.
    1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
    2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
    3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
    Regards
    Gregor

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to handle the One-Time Customer Process (Customizations - Master Datas)

    How can we handle the processes of one time customers (for example sales from a store without a warranty process fort he products)? Iu2019m planning of creating a different sales document type and use a single customer number for all of the documents created. On the other hand SAP has a solution for the one-time customers but I donu2019t know its details. Can anybody explain me the standard one-time customer process of SAP (the needed customizations and the master datas to be created)?
    Thanks in advance for the answers....

    Hi..
    the one-time customer is an account group (CPDA) that is used for "walk-in" or "cash" buyers. although this account group can be used for regular sales orders, this is intended to be used with the Cash Sales type of sales documents, where no accounts receivable is created. you also need the one-time customer as a "dummy" and avoid creating many customer masters for buyers who may only do one transaction with your company.
    when you use the one-time customer account group in the Cash Sales order, you enter the one-time customer number in the sold-to party field. the system will then prompt you to enter the actual name (and address) of the buyer. you can have the option of generating SD reports with the real names of the customers.
    you create the one-time customer the same way you do with the regular Sold-to party. there are some differences, in the sense that this is a "dummy" account. you do XD01 or VD01 to create the account, choosing account group CPDA. you also make entries in the sales areas.
    Regds
    MM

  • How to maintain the e-mail field in customer master data

    Hi to all,
    i need to do the field e-mail obligatory in the customer master data when i create a new customer(transaction FD01), but in customizing and in the user exit SAPMF02D this field is not present in the various structure/tables enabled (the table is ADR6 but not is in the list).
    How i can do? Thanks in advance for any reply!!

    Dear,
    Check the Functional Module through SE37 : BPAR_M_FI_MODIFY_EXECUTE_NEU
    And also check the Note: 703094.
    Hope it will solve.
    Regards,
    Kishore K
    Edited by: kishore babu on Dec 21, 2009 3:38 PM

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How to get the printout of TDS Certificate for Sec-194I and 194H in SAP

    Dear Experts,
    I have a requirement at the time of  taking printout of TDS Certificate for Sec-194I and 194H Printer got hanged and could not be able to take printout.But when printer got OK,user took printout of the said TDS certificate but Acknowledgment Number is not getting print.
    How can i get the printout of certificate with acknowledgment Number and all details.
    Yours' help would be appreciable.
    Thanks&Regards

    Hi
    This link will be of use to you.
    http://www.sapficoconsultant.com/pdf/Extended%20Withholding%20tax%20configuration.pdf
    Also check the SAP Notes 1046758, 1094944, 1062383
    Regards
    Sanil

  • How good is the new Adobe Reader IOS for fillable forms and interactive pdfs?

    At last adobe reader for ios has been updated so now fillable forms can be completed on ipad/iphone but how good is it?
    I've tested a form and reset form/print form and save as buttons do not seem to work.
    Form submit seems ok, just wondered what others thought?
    Also the new Adobe Reader IOS is now able to display interactive pdfs with buttons such as go to next page etc yet page transitions do not work? Again whats everyone elses opinion on the reader ios update?

    My preliminary experience is that Reader does better with forms than with interactivity.
    I've written a couple postings on InDesignSecrets.com about PDF readers for tablets. Here's the latest one:
    Finding the Best Tablet PDF Reader
    You should also check out PDF Expert (US $9.99) which handles interactivity better than Reader if that is important to you.

  • How to get the functionality of  FM 'RV_PRICE_PRINT_ITEM' for archived data

    Hi All,
    I am trying to print archived billing data using archiving object SD_VBRK. I am able to print all the related information except the pricing.
    Apart from reading all the tables archived under the archiving object SD_VBRK,  I also need to use the function module 'RV_PRICE_PRINT_ITEM' to print the pricing related information on the SAP form.
    However this function module reads the data from standard tables KONV etc., which are archived. Due to this I can not use this function module for printing the pricing related information for archived billing document.
    However I need to incorporate similar functionality for the archived data.
    Can anyone help me in replacing the FM 'RV_PRICE_PRINT_ITEM' for the archived data.
    Thanks and Regards,
    Santhoshi

    Please use this FM to read information from the Archived mode '/PBS/RV_PRICE_PRINT_ITEM'
    Thanks,
    Ranjith.

  • How to increase the number of processes taken for loading data?

    Hi,
    While loading data from R/3 to BW, we found that the particular load is taking 2 processes to load data into Cube.
    Is there anyway to increase the number to 4 ?
    Thanks in advance.
    Bobby.

    Bobby,
       to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
    in order to check the setting in source system  SBIW--> General Settings --> Control Parameters for Data Transfer.
    we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • How to get the attribute values out?

    Hi everyone,
    <root>
    <category name="Mens Clothing" id="0">
    <subcategory>Active/Baselayer Tops</subcategory>
    <subcategory>Active/Baselayer
    Bottoms</subcategory>
    </category>
    <category name="Womens Clothing" id="1">
    <subcategory>aaa</subcategory>
    <subcategory>bbb</subcategory>
    </category>
    </root>
    How to get the attribute values out? For example "Mens
    Clothing" and "Womens Clothing".
    // the line below returns "Active/Baselayer Tops" and
    "Active/Baselayer Bottoms"
    var myXml:XML = new XML(event.result);
    Thanks,
    May

    Here is attribute identifier operator from FB Help:
    @ attribute identifier Operator
    Usage myXML.@attributeName
    Identifies attributes of an XML or XMLList object. For
    example, myXML.@id identifies attributes named id for the myXML XML
    object. You can also use the following syntax to access attributes:
    myXML.attribute("id"), myXML["@id"], and myXML.@["id"]. The syntax
    myXML.@id is recommended. To return an XMLList object of all
    attribute names, use @*. To return an attribute with a name that
    matches an ActionScript reserved word, use the attribute() method
    instead of the @ operator.
    Operands attributeName:* — The name of the attribute.
    Example
    How to use examples
    The first example shows how to use the @ (at sign) operator
    to identify an attribute of an element:
    var myXML:XML =
    <item id = "42">
    <catalogName>Presta tube</catalogName>
    <price>3.99</price>
    </item>;
    trace(myXML.@id); // 42The next example returns all attribute
    names:
    var xml:XML =<example id='123' color='blue'/>
    var xml2:XMLList = xml.@*;
    trace(xml2 is XMLList); // true
    trace(xml2.length()); // 2
    for (var i:int = 0; i < xml2.length(); i++)
    trace(typeof(xml2
    )); // xml
    trace(xml2.nodeKind()); // attribute
    trace(xml2
    .name()); // id and color
    } The next example returns an attribute with a name that
    matches a reserved word in ActionScript. You cannot use the syntax
    xml.@class (since class is a reserved word in ActionScript). You
    need to use the syntax xml.attribute("class"):
    var xml:XML = <example class='123'/>
    trace(xml.attribute("class"));

Maybe you are looking for