How to maintain the e-mail field in customer master data

Hi to all,
i need to do the field e-mail obligatory in the customer master data when i create a new customer(transaction FD01), but in customizing and in the user exit SAPMF02D this field is not present in the various structure/tables enabled (the table is ADR6 but not is in the list).
How i can do? Thanks in advance for any reply!!

Dear,
Check the Functional Module through SE37 : BPAR_M_FI_MODIFY_EXECUTE_NEU
And also check the Note: 703094.
Hope it will solve.
Regards,
Kishore K
Edited by: kishore babu on Dec 21, 2009 3:38 PM

Similar Messages

  • How to delete the sales org information from BP Master Data in SAP CRM 5.0

    Hi Guruu2019s
    How to delete the sales org information from BP Master Data in SAP CRM 5.0
    Thanks...
    Mahesh Pasupunuri

    Hello
    There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
    Regards
    Joaquin

  • How to cusotmize the attribute of being mandatory for master data and order

    Hi,everyone
    how to make the  un-mandatory field on the verdor master data mandatory?
    Also, How  to set to define my own mandatory fields on  purchase order?   I also need to remove the mandatory setting which is pre-set by the system on many docutments&master data.
    How to fullfil them.
    thank very much

    hi
    for vendor master
    spro>Logistics - General>Business Partner>Vendor>Control>Define Account Groups and Field Selection (Vendor)
    or code  OMSG
    material master 
    OMSR
    Purchase Order
    Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > here get the Field selection key for the PO Doc type
    Now go to SPRO > MM > Purchasing > Purchase Order > Define Screen Layout at Document Level > Here the field selection key, under selection group "GR/IR control", mark "GR-based invoice verification" field as mandatory
    hope it help
    try asking the questions one by one
    regards
    kunal

  • Addition of new field to customer master data

    Hi
    Is it possible to create a new field in customer master table screen  and
    to have the same field in sales order creation screen.
    can we do it in Ideas version of ECC.
    please guide me step by step.
    Regards
    Jai

    Hello,
    Information about the latest enhancement technology to change the standard SAP funcionalities can be found here :
    [http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw2004s/helpdata/EN/94/9cdc40132a8531e10000000a1550b0/frameset.htm]
    This technology is also included in ECC 6.0, you can add fields, add fields to screens, ...
    Hope this is usefull.
    Wim

  • Which is the best approach to upload customer master data?

    Hi Everyone,
    I have to load customer master data  which is extracted from ecc by using generic data source(view) when i try to  trigger DTP it is showing error message  as duplicates because the customer has two sales area ,two person number and two consumernumber and four partner functions.
    So i tried to make all these as compounding attributes but the length is exeeding 60 for these attributes so how can i implement this.can i implement hierarchy's?
    Please give me any suggestions.
    Thanks and Regards,
    G.Kavyasree

    Hi Yogesh,
    The issue is not resolved yet.If the length is manageable  in compounding attributes.please suggest me the solution.
    yes ,by enhancing two data sources 0customer_attr and 0customer_sales_attr i can meet my client requirement .but i dont know how to join these datasources  based on customer number in bi (i.e customer genral data from 0customer_attr  datasource and sales area data from 0customer_sales_attr  datasource ) and generate a report on these two datasources  data.
    my report should look like this .
    customer_id   firstname      city      country   sales_org  distribution_channel  division  telephone
      100                 mary       newyork    us          1010                     10                    10       +1xxxx456
      100                 mary       newyork    us          1010                     20                    10       +1xxxx457
      100                 mary       newyork    us          1010                     20                    20       +1xxxx433
      101               richard       texas        us          1010                     10                    10       +1xxxx351
    Please provide your valuable suggestions.
    Thanks,
    Kavya

  • How to maintain the Goods reciepent field in edit mode while SHC creation

    Hi Experts,
    Can any one suggest me a solution, this is the requirement in SRM 5.0 version classic.
    Business wants to keep the Goods recipent field in edit mode instead of in grey mode, so that User can edit and assign someone at the time of creation of shopping cart.
    This is because If i raise a shopping cart i will be goods recpient by default, but business does not want that they want to edit  and assign a person at the time of creation of shopping cart .
    Can it be possible in the standard template.
    If so what has to be done. Please suggest !!!
    Regards
    Srujan.K

    Hi
    Srujan:- while creating a cart you might get a list of good recipient right so you can assign whoever you wish to be a good recipient right. while creatiing a cart good recipient was determined and partner functions are created for good recipient. do you want to edit them again.
    Can we change Goods Recipient after shopping cart is ordered
    nagaraj:- in old srm it helps but srm 550 say no
    http://help.sap.com/saphelp_srm50/helpdata/en/84/a7e3389870c05ce10000000a114084/content.htm
    we can not make default good recipient
    for eg srujan create a cart by default naga become a good recipient . that is old. this requester attribute dont work for dual purpose.
    it uses sfor only on behalf of only
    br
    muthu

  • How to insert e-mail into a customer master data

    Hi all,
    i need to insert e-mail into customer's master data, which bapi can i use? and, if that possible, how?
    i explain the situation: we need to let some users change a customer data, what we want is create a transaction, let say ZXD02, that only let a user add or change emai for customer and update the Notes (see attachment). What user do, have to be replicated in Master Data in General Data-->Address-->E-Mail
    Any suggestions?
    Thnks a lot

    Hi Cristina Martínez Eguiarte
    We can implement field level authorization in SAP standard IMG settings. There is no need of any exit BAPI or screen/transaction variant for this. Please go through my doucument in which I have shared the process and settings. I did this for some other field and I hope you can do it for Email ID field as well.
    Field level authorization for customer and vendor master in SAP.
    Please test and update.
    Thank$

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to delete the duplicate email address in BP master data

    Hi,
    When  you get an email ids from the third party vendor and you are loading into CRM BP master data.  how to delete the duplicate email address already exits in the system.  In CRM you can create the same BP with different id.   I would like to know how to delete the email address during importing email addresses from the third party tool.
    During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data. 
    If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
    thanks,
    arul

    Hello Arul,
    welcome to the SDN CRM Development forum.
    1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
    2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
    3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
    Regards
    Gregor

  • How to populate Value of Vendor Field in Serial Master data

    Hi,
    In Serial Number ,there is field named "Vendor". We want to populate this field with vendor number from PO at the time Goods receipt of Serial Number.
    Can you pl. tell me what configuaration needs to be done to populate this with vendor number from PO at GR?  I am not able to populate this .
    Thanks in advance for your inputs on this.
    Regards,
    Krishnendu

    Krishnendu,
      I dont think this can be achieved through configuration. You could try to use  the available user exits ( IQSM0005 Customer exit in update and  IQSM0007 Customer exit for goods movements) to update the vendor number in the equipment master.
    Regards
    Narasimhan

  • Custom fields to the sales area tab of customer master data

    Hi Guys,
           i have one requirement, where i need to add Zfields to the Sales tab in sales area data of customer master. Can somebody give me steps how to do it? do we need to do screen programming or just appending KNVV so that functional consultants can do configuration based on account group?
    help would be appreciated
    Thanks in advance
    Siva

    Hi,
         .First in IMG - Enterprice Structure - Definition
    Create the Organisational Units you want to use
    2.Then In Enterprise structure - assignment
    Setup the sales areas you want to use in SD
    Then go to XD01/ VD01 and create a new customer to whom you want to sell goods & service thr a particular sales area which you have already set up in IMG.
    YOu can create a customer master for only those sales areas which you have created in Step 2 above.
    Then create a sales document type VOV8 and then assign sales document type to sales area in which you want to use.
    IMG-Sales & distributin-sales-sales document-sales doc header
    Do all other assignments like item category determination, schedule line category, pricing procedure determination etc
    and then you can cretae a sales document using the particular sales area.
    <b>Reward points</b>
    Regards

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • Problem extracting fields for customer master data upload

    Hello,
    I have a list of fields that I need to extract into a file to be used in a customer master upload. I am having a problem with two fields. they are MOB_NUMBER in SZA1_D0100 and KTONR in RF02D. I am not sure how to retrieve these fields. I do not know if there are FM's that will retrieve the data for me or not. if anyone knows if there are FM's or another way to retrieve this data, can you please let me know.
    thanks in advance for the help

    this has been corrected

  • How to change the account group of a customer master?

    Would like to change Ship-to's to Sold-to's.  I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
    The planned change is not allowed as the following field groups would be masked by the new account group.
    Below the error the table displays Group Name PO Box City and Address.
    How do i bypass this and successfully change the ship-to to a sold-to?

    Hi ,
        Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
          I think , Number ranges should be same.
    if itz not  da same number range system will give the message ,but it will allow to change the account group.
    As I successfully worked in this issue earlier.
    As we all know, we only change the account group from lower to heigher,
    ie. sh,bp,py to SP only not viceversa.
    *rewards if it helps

  • Profit center Field in customer master

    Dear Experts,
    Is it possible to activate the profit center field in customer master under billing data, I saw the account group layout but center field is not there.
    Is there any other way is there for activating the profit center field.
    I saw this field in one of my client.
    please help how to activate the profit center field in customer master
    Regards
    Sri

    Hi
    Profit center as a field is not available in Customer Master. However, if you have new gl activitaed it is copied to the customer line item  from the offsetting line item. By system design, it is imperative, that the subledgers like customer or vendors are updated with the profit center of the line item. This is what the concept of document splitting is all about.
    Regards
    Sanil Bhandari

Maybe you are looking for