How to decrease workspace quota ?

Hello :)
When creating a new APEX workspace with new schema, APEX initially asks for a Space Quota.
How do I increase and/or decrease the initially specified space quota for a workspace ?
I've looked around in "Manage Workspaces" (eg. "Manage File Utilization") but cannot find any option to change a workspace quota. The only way I know to change a workspace quota is to raise a Service Request, but this only allows increasing quota - what if I want to decrease the quota ?.

jarola wrote:
Hi,
You can not do that from APEX.
DBA need modify data file.That is strange, because I can see in OEM that (1) the user tablespace quota is unlimited, (2) the tablespace is set to autoextend, and (3) USER_TS_QUOTAS and DBA_TS_QUOTAS dictionary views show that Max_Bytes and Max_Blocks is "-1" (unlimited).
This suggests to me that there is an additional quota being enforced by APEX. This should be modifiable somewhere but where ?
As of APEX version 4.2.1, it appears to me that the only way to increase workspace/schema quota is via a Service Request. This means somebody has to go through a tedious process: (1) log in a particular workspace, (2) raise a service request, (3) then log in as an instance administrator to approve the request in order to increase a workspace quota. And the change direction is only one-way (ie. only allows increases and not decreases) -- so what if an instance administrator initially specifies a huge 1000 gigabyte workspace/schema quota by mistake and then later wants to restrict it ?
There should be a place in Manage Workspaces for an APEX instance administrator to modify/manage workspace or schema quotas in a central location.
Edited by: mvanle on May 4, 2013 6:56 PM

Similar Messages

How to change the quota of a workspace on OCS10g?

Hi,
How to change the quota of a workspace on OCS10g?
I can't find the site administrator page or workspace administrator page to change the quota of workspaces?
Regards,
Kitae
Message was edited by:
kitaelee

Hi -
Oracle Support has a linux command-line script available under controlled release for customers to perform the following:
1) Modify default quota for all subsequently created Libraries.
2) Modify the quota for a specific Workspace Library.
Customers can file a TAR in Metalink and support will supply the script.
Customers should let their users know to send an email to their Collab Suite Administrator to request additional quota, and then the administrator can run this script.
Please note that this is filed as a bug and a patch is being developed. This script is provided as an interim fix.
Thanks

How to decrease the storage in macbook air

how to decrease the storage in macbook air ?

you mean decrease all the files filling your Air?
See here for answer about the OTHER which is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
See Kappys excellent note on the rest of “other” files taking up your space:
What is "Other" and What Can I Do About It?
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

YES! How to make PRINT QUOTAS WORK with 10.4

How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

How to replace double quotes with a single quote in a string ?

Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.

Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals.

How to calculate the quota base quantity in quota arrangement?

Hi all,
As we all know, when a new supplier is added in the quota arrangment, we take the help of quota base qunatity so that the new supplier does not get any unfair advantage over the existing suppliers. Would you please help me on how to calculate the quota base quantity or on what basis the quota base quantity is calculated?*
Regards,
Ranjan

Dear,
Quota arrangement divides the total requirements generated over a period of time among the sources of supplied by assigning a quota.
Quota u2013 quota is equal to a number and its represents the proportionate of requirements. Total quota of all the vendors is equal to 100% of requirements.
This quota arrangement is also specific to material and plant level.
Quota rating = quota allocate quantity + quota base quantity / quota.
Quota based quantity used only when a new vendor introduced.
In the as on date situation, the minimum quota ratings will considered as preferred vendor.
The 2 vendors has 2 same quota rating, the vendor who is having the highest quota will considered first.
In the running quota, a new source of supply is included. (In situation of short supply) including a new source not means to reduce the quota for existing.
Regards,
Syed Hussain.

How to handle the quotes('') in the procedure?

Hi all,
I have been struggling with an issue in the procedure. Let us go to the functionality of the preocedure.
I am passing a parameter that has text like
' INDIA,BANGALORE,"INOX,BLR","THILAK NAGAR,JAYA NAGAR "4TH 'T' BLOCK,BANGALORE",560030'
Here, INDIA = country field
BANGALORE = city field
INOX,BLR = Theatre field
THILAK NAGAR,JAYA NAGAR "4TH 'T' BLOCK,BANGALORE = address field
560030 = pin field
I want to load these fields into the table thru procedure. Here the issue is if any field value come with quotes(") inside the quotes like above address field. Since , please guide me how to handle that quotes while identifying the field value for either or address field or some other one.
Table structure:
country varchar2(100 char)
city varchar2(100 char)
theatre varchar2(100 char)
address varchar2(2000 char)
pin NUMBER
Procedure Code:
create or replace
PROCEDURE prc_rollout_upload( p_text VARCHAR2 )
AS
v_quote_ind NUMBER := 0;
v_first_pos NUMBER := 0;
v_end_pos NUMBER := 0;
v_text_data varchar2(32767 CHAR) := p_text;
v_text_data1 varchar2(32767 CHAR);
v_text_arr_ind NUMBER := 0;
v_quote_pos NUMBER := 0;
v_comma_pos NUMBER := 0;
type text_rec IS RECORD(country VARCHAR2(20 CHAR),
CITY VARCHAR2(1000 CHAR),
exhibitor VARCHAR2(1000 CHAR),
address VARCHAR2(10000 CHAR),
PIN varchar2(6)
type v_text_tab is table of text_rec;
v_text_array v_text_tab := v_text_tab();
BEGIN
-- Fetch the values from the string to a PL/SQL table
v_text_data1 := v_text_data;
v_text_arr_ind := v_text_arr_ind + 1;
v_text_array.extend(v_text_arr_ind);
-- Country
IF (INSTR(v_text_data1, CHR(34)) > 0 )
THEN
v_quote_ind := INSTR(v_text_data1, CHR(34));
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).country := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).country);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
END IF;
IF ( v_quote_ind = 0 ) THEN
v_text_array(v_text_arr_ind).country := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).country);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_ind := 0;
END IF;
-- City
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_quote_ind := INSTR(v_text_data1, CHR(34));
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).city := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).city);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).city := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).city);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_ind := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
-- Exhibitor
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).exhibitor := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).exhibitor);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).exhibitor := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).exhibitor);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
--Address
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).address := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).address);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).address := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).address);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos :=0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
--PIN
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).pin := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).pin);
v_text_data1 := 0;
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_comma_pos IS NULL OR v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).pin := v_text_data1;
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).pin);
v_text_data1 := 0;
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
EXCEPTION
WHEN others then
DBMS_OUTPUT.PUT_LiNE(SUBSTR(SQLERRM,1,200));
END prc_rollout_upload;
Oracle version :
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
Your help would be highly appreciated !!!
Regards,
Vissu.....

To start with Try this:
SQL> ed
Wrote file afiedt.buf
1    declare
2   v_var VARCHAR2(10000) := 'INDIA,BANGALORE,"INOX,BLR","THILAK NAGAR,JAYA NAGAR ';
3    v_delim VARCHAR2(1) := ',';
4    v_enclose VARCHAR2(1) := '"';
5    v_val VARCHAR2(1000) := NULL;
6    begin
7    v_var := v_var||'"4TH T BLOCK,BANGALORE",500365'||',';
8    FOR I IN 1..5 LOOP
9    v_val := CASE WHEN SUBSTR(v_Var,1,1) <> '"' THEN
10              SUBSTR(v_Var,1,INSTR(v_Var,',',1,1)-1)
11              ELSE
12              SUBSTR(v_Var,2,INSTR(v_Var,'",',1,1) - INSTR(v_Var,'"',1,1) - 1)
13              END;
14    v_Var := CASE WHEN SUBSTR(v_Var,1,1) <> '"' THEN
15              SUBSTR(v_Var,INSTR(v_Var,',',1,1) + 1)
16              ELSE
17              SUBSTR(v_Var,INSTR(v_Var,'",',1,1) + 2)
18              END;
19    dbms_output.put_line(v_Val);
20    END LOOP;
21* end;
SQL> /
INDIA
BANGALORE
INOX,BLR
THILAK NAGAR,JAYA NAGAR "4TH T BLOCK,BANGALORE
500365
PL/SQL procedure successfully completed.
SQL>

How to decrease the width of left column in the "2 column layout"?

Hi all,
I create two webdynpro based iViews in the EP, then I create a page use the "2 column layout(Narrow:Wide)".I put one iview in the left column and another iview in the right column. When I preview my page, I found the left column still too wide. So how to decrease the width of my page's left column?
Thanks and Best regards
Deyang

Hi Deyang,
You have to create your own layout:
- Navigate to System Administration->Support
- Choose Portal Runtime -> Browse Deployment
- Navigate under pcd or under temp, and download the layouts par (com.sap.portal.layouts.default.par.bak if I recall correctly)
- Import that par as a project to Developer Studio
- Make your changes (create a new jsp acording to the existing examples, and update the portalapp.xml accordingly)
- Export to par (in a different name!) and deploy
- In the portal content: new from par -> Layout (don't forget to mark it as a template).
- Your new layout template will now be available when you create new pages.
good luck!

How to set user quotas on a certain filesystem

Hi
It may be simple and easy question but I'm really new to this
I need to know how to set user quotas on a certain file system in details
I know it can be done easily in one step in Solaris ZFS
but how is it done in Linux ?
Thanks in Advance :)

See also:
How to set user quotas on a certain filesystem

How to Decrease fragmentation level of a table.

Hello Everyone,
There is a table present in my production database.
Its version is Oracle 10G(10.2.0.1.0)
i)Its size is 26 GB with fragmentation level.
ii)It has more then 48 crores of rows.
iii)Its size is 20 GB without fragmentation level.(So 6 GB of unused space is wasted).
Following are my doubts regarding the above points.
i) How to decrease the fragmentation level of the table.
ii) if there is any way to decrease the fragmentation level,how much time it will take to perform the particular activity so as to decrease the fragmentation level.

Well Mine is Oracle 10G. Hence the production database is Locally Managed.Well it has more then 48 millions of rows in my table
Definition of Fragmentation :-
When rows are not stored contiguously, or if rows are split onto more than one block, performance decreases because these rows require additional block accesses.
When a lot of DML operations are applied on a table, the table will become fragmented because DML does not release free space from the table below the HWM.
Definition of High Water Mark(HWM):-
HWM is an indicator of USED BLOCKS in the database. Blocks below the high water mark (used blocks) have at least once contained data. This data might have been deleted. Since Oracle knows that blocks beyond the high water mark don't have data, it only reads blocks up to the high water mark when doing a full table scan.
Please go through the below example if you have any doubts.
EXAMPLE:-
How to find table fragmentation?
SQL> select count(*) from big1;
1000000 rows selected.
SQL> delete from big1 where rownum <= 300000;
300000 rows deleted.
SQL> commit;
Commit complete.
SQL> update big1 set object_id = 0 where rownum <=350000;
342226 rows updated.
SQL> commit;
Commit complete.
SQL> exec dbms_stats.gather_table_stats('SCOTT','BIG1');
PL/SQL procedure successfully completed.
Now lets determine the size of table
TABLE SIZE(with fragmentation)
SQL> select table_name,round((blocks*8),2)||'kb' "size"
2 from user_tables
3 where table_name = 'BIG1';
TABLE_NAME size
BIG1 72952kb
ACTUAL DATA in table:
SQL> select table_name,round((num_rows*avg_row_len/1024),2)||'kb' "size"
2 from user_tables
3 where table_name = 'BIG1';
TABLE_NAME size
BIG1 30604.2kb
Note = 72952 - 30604 = 42348 Kb is wasted space in table
Edited by: 855956 on May 3, 2011 12:11 PM

How to create Absence Quotas in infotype -- 2006.

Hi Friends,
Need some urgent help.
How to create Absence Quotas in infotype -- 2006.(In standard method)
Any standard programe, TCODE, BAPI FM.
How to Use?
Pls help me urgently.
Bye
RAHUL

Find below the link with directions to create a Quota.
[Absence Quota|http://doa.louisiana.gov/hrhelp/content/prmd-createabsencequotaforpersonalleaveforamanualleaveearningemployee/cc/html/index.htm]
Hope this helps
Vinodh Balakrishnan

How to decrease width of the dropdown bookmark panel (FF 11)?

How to decrease width of the dropdown bookmark panel (FF 11)?
This panel is too wide and covers too much space in underlying windows. The book marks text should not be truncated but some way needs to be found to allow the entire text of any line to be viewed when the cursor lands on it. Much of the information in "HELP" related to this question turns out to be very very old (essentially meaningless in 2012).

My bookmarks truncate, but only after many, many characters. Then you can view the full title, as well as the URL, in the mouseover tooltip.
To narrow the width of the bookmark menus:
(1) There might be an existing add-on targeted to this; I didn't search.
(2) You could create a custom style rule. One way to do this is to use the Stylish extension and add the following userstyle (create a blank rule first):
<br>@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#bookmarksMenu menupopup {max-width:15em;}
That works in my test, but you can tweak that maximum width to suit your needs. (1 "em" is about 16 pixels). Stylish can be installed from here: [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish :: Add-ons for Firefox].
(3) You could create a custom style rule in the file userChrome.css, which you can add to your personal Firefox profile. I didn't test it.

How to do The quotes and subscripts in pages??

Hi guys,
I don't know how to do the quotes and subscripts in pages for iOS...
Someone can tell me this??
Sorry for my English, I'm not American...

You can create left and right single quotes with option + }, and shift + option + }, respectively.
Double quotes work the same way using the { character substituted above.
Menu > Format > Font > Baseline:
Superscript is control + command and +
Subscript is control + command and -

How to decrease SGA size in oracle 9i

hi,
how to decrease SGA size .. now SGA size=400m i want to drecrease to 150m
Thanks,
Mohammed

Why do you want to do this? Is your system low on memory?
Perhaps your DB is on a laptop with
only a small amount of memory?
Well an enterprise database server set of
thread inside a complex service would need
a high powered laptop with large amounts
of memory.
Or perhaps your UAT server has 10 databases
on it all competing for resource?The culprit may not be Oracle.
For example (as you have not told us your operating system, windows linux unix?) IBM's AIX unix operating system comes configured optimally for managing file caching in the OS memory; as Oracle also caches the blocks read from disk sometimes the file system caching is redundant and ends up using memory better allocated to Oracle. In that case you tune the Unix kernel to reduce memory allocated to the file system caching. The default settings allow IBM AIX to take up to 80% of system memory for caching bad if you have allocated 40% to the SGA already.........
The really cool thing about AIX is you can do this on the fly and you don't need to reboot so when you go live you juggle until you get an optimal setting and then monitor.
In the end you may just have to add memory.

How to define a quota for a tablespace?

I am having a problem creating users with Data Modeler. I can specify the user's default tablespace, but I can't figure out how to add the "QUOTA ... ON ..." clause. Yes, I can edit the DDL exported manually, but I would like to no need to remember to do that...
Mike...
Edited by: 896516 on Nov 10, 2011 1:05 PM

Hi Mike,
If you expand the node in the Browser tree for the User, a Quotas node appears. Adding Quota objects here allow you to define quotas for specific Tablespaces, which will be generated as QUOTA ... ON clauses in the generated DDL.
David

How to decrease workspace quota ?

Similar Messages

Maybe you are looking for