How to define manager's area of responsibility in SAP

Hello All,
I am not able to figure out where to define manager's area of responsibility and link the same to SAP user?
My requirement is to display all the Orgunit and talent under a particular manager which should be attach4ed to SAP login user ID.
I dont know if i need to have Portal contents too to defien the same.
Right now i have ECC6 EHP4 system.
Mani

Hi Mani
The managers user must be linked to an employee holding a chief position to determine the viewable employees
Chief responsibilities can be maintained in PPOME
Positions can be assigned to PERNR via HIRE actions
PERNR can be assigned to SAP user via infotype 0105 subtype 1
In general in order to ensure the correct teams/employee information is available, selectable and outputted you should check OADP customizing in the MSS IMG
Best regards
Stuart

Similar Messages

Compensation Management - How to define the Compensation Area

Dear Experts,
We are implementing Compensation Management module for our client which contain global entities( 14 Countries.(Payroll- Country wise)
Can you please guide me, how do define the Compensation Area for all the 14 countries.
The following components are defined with similarities for our Client like (regionally)
India Corporate Office:
Salary Increase
PMS Based Incentive(F)
PMS Based Incentive(B)
India Factory:
Salary Increase
Bonus Factory
PMS Based Incentive(F)
PMS Based Incentive(B)
African Countries: (including 10 Countries having the same components)
Salary Increase
PMS Based Incentive(F)
PMS Based Incentive(B)
Bonus Africa(only)
Europe: (3 Countries having the same components)
Salary Increase
PMS Based Incentive(F)
PMS Based Incentive(B)
Kindly guide me how to define the above business scenario into SAP and looking forward your valuable guidelines.
Thanks in advance.
Regards,
Anbazhagan.N

Hi,
Do you mean to say you have diff payroll areas for India say Corp and Factory like wise,then you can group Compensation Area as 01-corp with Ctry Grp 40 and 02-Factory with Ctry Grp 40 so on and so forth,same with other countries depending upon their payroll.
Also check with the Documentation of Compensation area.

How actually MRA(management reporting area) triggers

Hi
How actually MRA(management reporting area) triggers?
Any financial setting required?
regards
madahavan

Hi Satish,
You can try remodelling the cube with a new characteristic which is a flag\another version which will store the load date or something on the similar lines. This will let you report your DP data based on your load date.
Hope this helps...
Godhuli

How to Define Workbook / Business Ares Security Correctly for new Users

Hi All,
Please could you help me understand the Security Model for Workbooks and business Areas as I believe I am very close to understanding it, but missing something important.
Background Information:
We are using the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger) to build our reports on. These are the steps I am taking to try and assign a new user & responsibility access to the existing report.
1. I create the Report in Discoverer Desktop under the General Ledger Responsibility logged in as myself assume report name = Report_1.
2. I create a new Responsibility in Oracle Apps called Discoverer Resource Coordinators.
3. I create a new User in Oracle Apps called Joe Bloggs and assign the responsibility Discoverer Resource Coordinators to the Joe.
4. Logged in as myself in Discoverer Desktop, Responsibility General Ledger I Share the Report (Report_1) to the new Responsibility I just created Discoverer Resource Coordinators.
5. In Discoverer Administration, Security, I assign the new Responsibility Discoverer Resource Coordinators to the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger).
6. In Discoverer Administration I set privileges so that the Responsibility Discoverer Resource Coordinators can do all tasks, query data, administer. .etc. etc..
7. I therefore believe everything has been done and attempt to Login and run the report under Joe Bloggs, but am unable to retrieve any data.
Help what am I missing!
Thanks,
Lance
Message was edited by:
Lance

Dear All,
This has now been adjusted according to your recommendations but to no avail.
Myself and Lance have ensured that this new responsibility has unlimited access to all the existing Business areas to eliminate joins within folders not being recognised, we have also ensured that the workbooks that have been created are shared with the correct responsibility.
I have thoroughly tested this set up by logging in as this new responsibility within Disco. Client to try and retrieve data in a new Workbook, but even for the simplest of queries this fails.
It seems that there may be a problem with the Responsibility linking to the EUL, could this be due to the new responsibility being created after the Current EUL was set up?
Does anyone have any information or knowledge where this could happen?
Regards
Si

How to define a sales area

Dear all,
when I " Assign sales order types permitted for sales areas", I occur the following error message :
Define <2100/10/11> first as a general sales area!
Message no. V2127
Diagnosis
You want to define allowed sales document types for a sales area which is not maintained as a common sales area. This is a sequence infringement of Customizing activities.
where I can define the 2100/10/11 as a general sales area? please help me.

Hi, MH,
Thanks for your kindly help. I check our configuration follow your sugguestion:
Set1.Img-SD-Sales-Sales Doc. Header- Assign Sales Area to Sales Doc
A. Combine Sales Organization
2200     缙云华孚     2200     缙云华孚
B. Combine Distribution Channel
2200     10     内销     10     内销
2200     20     外销     20     外销
2200     90     其它     90     其它
C. Cobine Division
2200     00     通用     00     通用
2200     01     色纺纱      00     通用
2200     02     染色纱      00     通用
2200     03     坯纱     00     通用
2200     04     OE纱      00     通用
2200     05     粗纱     05     粗纱
2200     06     棉网（条）05     粗纱
2200     07     白棉     05     粗纱
2200     08     本色纤维     05     粗纱
2200     09     染色纤维     05     粗纱
2200     10     其他     10     其他
2200     11     配棉     00     通用
D.Assign sales order types permitted for sales areas
when I assign
2200     缙云华孚     10     内销     11     配棉     ZBJ     专纺报价单
+get the follow error message:+
define <2200/10/11> first as a general sales area.
Step2. IMG - SD - BASIC FUNCTIONS - MASTER DATA -
A.Define Common Distribution Channel
2200     10     内销     10     内销     10     内销
2200     20     外销     20     外销     20     外销
2200     90     其它     90     其它     90     其它
B. Define Common Division
2200     00     通用     00     通用     00     通用
2200     01     色纺纱      01     色纺纱      01     色纺纱
2200     02     染色纱      02     染色纱      02     染色纱
2200     03     坯纱     03     坯纱     03     坯纱
2200     04     OE纱      04     OE纱      04     OE纱
2200     05     粗纱     05     粗纱     05     粗纱
2200     06     棉网（条）      06     棉网（条）      06     棉网（条）
2200     07     白棉     07     白棉     07     白棉
2200     08     本色纤维     08     本色纤维     08     本色纤维
2200     09     染色纤维     09     染色纤维     09     染色纤维
2200     10     其他     10     其他     10     其他
2200     11     配棉     00     通用     00     通用
What is wrong about my configuration? Please check it help me.
Best Regards
Passion
Edited by: Wu Passion on Nov 15, 2008 3:34 PM

Htmlb_tableview - how to define which columns are visible

Hello
i am working on an MVC BSP application that renders to the screen 5 fields.
Yet in the bsp definition I see it reads pt-requisition-list which has many fields.
<htmlb:tableView id                  = "requilistTab"
                   headerText          = "<%= controller->tv_header %>"
                   headerVisible       = "true"
                   columnHeaderVisible = "true"
                   table               = "<%= controller->pt_requisition_list %>"
                   design              = "alternating"
                   width               = "100%"
                   visibleRowCount     = "20"
                   footerVisible       = "true"
                   emptyTableText      = "<%= otr(paoc_rcf_ui/no_requi) %>"
                   sort                = "SERVER"
                   onHeaderClick       = "dummy"
                   keyColumn           = "OBJID"
                   iterator            = "<%= controller %>"
                   filter              = "SERVER"
                   visibleFirstRow     = "<%= controller->visible_first_row %>"
                   selectedRowKey      = "<%= controller->selected_record-objid %>"
                   selectionMode       = "SINGLESELECT" />
My question: how do you tell the bsp what fields to display?
Thanks in advance
yuval

iterator = "<%= controller %>"
this is what makes controlling the columns visible.
go to the class (referenced by variable controller) and see the method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS to see the coding behind this.
alternative method to show/hide columns without using iterator.
page attribute:
col_control_tab     TYPE     TABLEVIEWCONTROLTAB
col_wa     TYPE     TABLEVIEWCONTROL
layout
<%
clear col_wa .
move: 'CARRID' to col_wa-columnname ,
'This is the title of carrid' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment ,
   'ICON_PLANE' to col_wa-icon ,
' ' to col_wa-encode ,
' ' to col_wa-wrapping .
append col_wa to col_control_tab .
clear col_wa .
clear col_wa .
move: 'CONNID' to col_wa-columnname ,
'<B>Connection</B>' to col_wa-title ,
'X' to col_wa-sort ,
   'DESCENDING' to col_wa-preSelectedSortDirection ,
'mycellclick' to col_wa-ONCELLCLICK ,
'LEFT' to col_wa-horizontalalignment ,
'X' to col_wa-encode .
append col_wa to col_control_tab .
clear col_wa .
clear col_wa .
move: 'FLDATE' to col_wa-columnname ,
'Price' to col_wa-title ,
'X' to col_wa-sort ,
'LEFT' to col_wa-horizontalalignment ,
' ' to col_wa-encode .
append col_wa to col_control_tab .
clear col_wa .
      %>
<htmlb:tableView id                  = "tv1"
                       design              = "ALTERNATING"
                       selectionMode       = "MULTISELECT"
                       onRowSelection      = "MYROWSELECTION"
                       table               = "<%= flights %>"
                     columnDefinitions   = "<%= col_control_tab %>"
                       tableLayout         = "AUTO"
                       width               = "50%"
                       columnHeaderVisible = "true"/>
in this example columnDefinitions attribute determins which columns to be shown.

How to define a window as constant in a sap script??

hi gurus..
developing a sap script for test..
i am confused how do i define a window as constant?? i m lookin on screen and there are two options only
1)main
2)variable.
also tell me y and wen variable window is used and constant window is used???
thanks
gaurav

Main window is dnamic window as in when the data flows to second page, main window can still hold it.
Eg: Invoice can contain 100 line items thus the invoice could be of several pages. The line items will flow on the other pages.
Other cannot hold data. If the data flows to second page and if its now a main window, there will be loss of data.
Plz reward if useful
thnx

How can I manage a vendor approval process in SAP?

Please guide With regards to vendor approval Process & also share if u have case study

HI
Use me61 transaction code.
If you are talking about the approval of vendor such as prototype sample, ppap sample and regular supply, and if this is your flow, then, by activating the profile in the quality info record for each material / vendor combination, the functionality can be made use of. Check whether this meets your requirement.
All The Best
Do reward Points

How to define Substitution rule for Businee area

Hi experts,
Could you please guide me to define substitution rule for Business are.
Below is the requiremnt :
I want to assign different business area for this cost centre.
While posting document in FB01, we are entering cost centre in line itme. Businee area is picking from cost centre master.
Example : Cost centre 11310 and businee area Y020.
Businee area Y020 is picking from cost centre 11310 while posting document.
I want to assign different business area for this cost centre.
For that I want to define substitution rule.
I have defined substitution rule and activated in comapany code but it is not working. Please guide me how to define Substitution rule for the same.
I have defined prerequisit as Comapny code = 2053 and Cost centre =11310 and transaction code = FB01 then
Substitute business area with Y045.
It is not working .
Please guide me where I did mistake and how to rectify the same.
Thanks in advance for your quick response and points will also assign for helpfull answer.
Regards,
Amar

Hi Paul,
Thaks for your reply.
Yes, you are correct. SAP is changing this back to BA from Cost centre.
Why can't we use Substitition for the above issue.
Then what is solution for my issue.Please suggest any alternative solution.
Thanks in advance for your help.
Regards,
Amar.

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

HT1338 When all your apps are ⊥o ⊥he la⊥es⊥ versions, how do you manage if ⊥here is an upda⊥e if your apps are no⊥ recognized in AppS⊥ore because you have changed your iMac compu⊥er?

When all your apps are ⊥o ⊥he la⊥es⊥ versions, how do you manage if ⊥here is an upda⊥e if your apps are no⊥ recognized in AppS⊥ore because you have changed your iMac compu⊥er and you have made a da⊥a ⊥ransfer of ⊥he whole sys⊥em and apps? When you own only one compu⊥er (excep⊥ an iPhone).

Make sure you are signed in with your Apple ID. Try reindexing Spotlight.
Spotlight – Re-index

I am getting many days Called US holidays that are not US holidays and ones I do not celebrate. How can I manage this list of days

I am getting many days showing up in the US holiday Ca;endar that are not US holidays and days that I do not celebrate. How can I manage this list

You could also go through your messages app and see if you have videos or photos in there. Delete unwanted emails and empty the trash in each account. If you are trying to update over wifi try doing it by plugging into iTunes.
If you need more space for an iOS update - Apple Support

How to use global variable defined in planning area in FOX

Hi guys
I meet a situation that needs to use variables defined in planning area in FOX.How to code?
My situation as follows:
Two variables are defined in planning area,one is zcomp_code,the other is zfiscyear.
There are two key figures in the planning area,one is sales volume,the other is delta(%).
I want to use sales volume multiplied by delta(%) in selected zcomp_code and zfiscyear by users.
Anyone can help?
Thanks in advance.

Hi Eric
check this example
in fox you shoud declare your data and after call your variable
after this you could easily operate on data using the f4 for definig the right fox operators
DATA FYEAR TYPE 0FISCYEAR.
FYEAR = VARV(PLANYEAR).
{0COPANETRV, FYEAR,CRA,020} =
{0COPANETRV,FYEAR,CRA,020} *
({ 0CP_DELTAB,FYEAR,CRA,020} + 100 ) /100.
{0CP_DELTAB,FYEAR,CRA,020} = 0.

How to define a flexfiled in security manager

hi guys ,
i would like to use getInfo subtitution of ODI.But I could not find out where to define the variable .
eg: ı wanna get the driver and url addresses from flexfield variable
'<%=odiRef.getInfo("DEST_JAVA_URL")%>', <%=odiRef.getInfo("SRC_JAVA_DRIVER")%>
but i don't know how to define the variables DEST_JAVA_URL and SRC_JAVA_DRIVER in security manager.
pls help

Hi,
'mgcp call-agent [ccm1] service-type mgcp version 0.1' command you have the primary server;
'ccm-manager redundant-host [ccm2] [ccm3]' for primary and secondary backup.
But you will need to run 'no mgcp','mgcp' for the changes to take effect.
Regards,
=====================
Please rate useful posts

How to define the size of report area and its elements?

How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
Is there any way to change the measuring units?
Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
Thanks.

Hi Juliano,
I hope this is what you had in mind...
1. File / Page setup: set your paper size, portrait/landscape and margins.
2. Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
3. Measuring units: is this for the ruler? This is pulled from your computer settings.
The rest I'm not sure about but I hope this is enough to get you started!
Heather

How to define manager's area of responsibility in SAP

Similar Messages

Maybe you are looking for